Tianhui- one of the leading UV LED chip manufacturers and suppliers provides ODM/OEM UV led chip service.

Why Is the ACLED Light Source Module Not Easy to Be Accepted

In recent years, the topic of ACLED light source module is very hot in the industry, but its applications are relatively small. In fact, it had already appeared abroad. As early as 2005, South Korea's semiconductor company had used ACLED light source modules to glow with ACLED light source modules. Secondly, the United States, Germany, Taiwan, etc. completed industrialized production, and there were. ACLED light source module product of the actual application system solution. With the development of the ACLED light source module abroad, there are also many companies in our country who research and apply it, but the effect is not so obvious. Because the key disadvantage of the ACLED light source module of the single -core architecture is to connect multiple luminous devices on a small grain, and the limited chip area is extremely limited to high -power output. Not easy to control. When the voltage of the power grid is rising or the dispersing power increases sharply, it will severely damage its internal. The popular "light engine" is currently widely encapsulated with aluminum substrate C0B, linear constant current technology. It proposes an effective solution for high -power output, becoming the mainstream of the ACLED light source module. However, the fatal disadvantage of this technology is that it must rely on aluminum -based plates with multi -layer thermal resistance. Traditional aluminum (or copper) substrate is to make the FR4 fiber board or BT board through the pressing process to become integrated aluminum substrates. The W /M-K is about 100 times the difference in the heat conduction coefficient of the pure aluminum with no insulating layer. It will increase the heat consumption ratio in such a large packaging heat resistance, and it will also accelerate the LED light at the same time. Deatromy and damage have reduced the life of LED. Although some people use ceramic substrates, although the thermal conductivity coefficient has improved, there are still many problems with the fixed heat dissipation of the lamp body. The ACLED light source module has gradually developed, but it is not ideal enough to light up brightness and medium -power output. More importantly, the use of poor heat dissipation brought by SMD and aluminum -based plates affects stability and life. New solutions, at the same time the ACLED light source module is constantly improving. When it matures, it will seize the market in the form of simplicity, no transformers, electrolytic capacitors and excess peripheral components, integrated packaging integrated technology. The ACLED light source module has passed the bud stage and is in a rapid development period. From the perspective of its development trend, the ACLED light source module technology will inevitably become a leader in the development of the industry. Some people think that in the near future market, more than 80%of the entire application market will adopt the ACLED light source module, and will change the LED industry pattern.

Why Is the ACLED Light Source Module Not Easy to Be Accepted 1

Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

recommended articles
Projects Info Center Blog
Sunlight remains the most common source for achieving a tan, but its ultraviolet (UV) rays come with inherent risks. So is there any risk-free solution for this? Yes, and the answer is UV LED Lights. Let’s not waste a second and dive into the science behind UV light and tanning, explore traditional tanning methods, and introduce Tianhui UV LED, a leading supplier of UV LED solutions, as a potential alternative.
In the food and beverage industry, ultraviolet (UV) disinfection technology is a rapidly expanding sector. UV radiation is used to disinfect water, air, and surfaces by killing bacteria, viruses, and other pathogens to make the food healthy. This technology has grown in popularity due to its efficiency, usability, and minimal cost.
The rapid expansion of the electronics industry has necessitated the development of new and innovative technologies to propel the industry forward. The application of UV LED solutions is one of the emerging technologies in the electronics industry. Due to their unique characteristics, such as long lifespan, energy efficiency, and compact size, these solutions have been extensively adopted in the industry as a suitable alternative to conventional lighting sources.
UV LED curing is a technique that employs ultraviolet light to cure or harden substances. This procedure involves exposing the material to UV LED diodes emitting UV light. When UV light strikes a substance, it initiates a chemical reaction that causes the substance to harden or resolve. UV LED diodes emanate UV-A, UV-B, and UV-C light, which correspond to the wavelengths required to initiate the curing process.
Throughout the years, ultraviolet (UV) light as a disinfectant has gained popularity. UV LED has been used as a UV LED solution that is capable of killing a variety of microorganisms, including bacteria, viruses, and mold. It is also known as UV LED Disinfection process.
As summer approaches, so does the pesky problem of mosquitoes. These tiny insects can ruin a peaceful outdoor evening, leaving us with itchy bites and disease risk. Fortunately, there's a solution in the form of UV LED mosquito traps. These devices use the power of ultraviolet light to attract mosquitoes and other flying insects better.
Are you aware of the latest findings on the transmission rate of the new coronavirus? A recent study has uncovered a shocking discovery- the air transmission rate of the virus may be a staggering 1,000 times that of the contact surface! This means the virus may spread faster and farther than we previously thought. Keep reading to learn more about this groundbreaking research and what it means for our fight against the pandemic.
UV LED printing system is a cutting-edge technology that has revolutionized the printing industry by offering faster printing speeds, improved print quality, and increased energy efficiency. However, like any technology, it has its own pros and cons.
Are you looking for a robust and flexible solution to disinfect your space? Look no further than mobile UV units. These innovative robots move from room to room, eliminating harmful germs and bacteria on surfaces. Mobile UV led diodes are becoming popular as more industries outside of healthcare catch on to the benefits of UV disinfection.
UV LED, also known as Ultraviolet Light Emitting Diodes, is a solid-state device that produces light as soon as you pass electrical currents in a circuit. These currents pass from the positive side to the negative side of a current.
no data
one of the most professional UV LED suppliers in China
You can find  us here
2207F Yingxin International Building, No.66 Shihua West Road, Jida, Xiangzhou District, Zhuhai City,Guangdong, China
Customer service