loading

Tianhui- one of the leading UV LED chip manufacturers and suppliers provides ODM/OEM UV led chip service.

Several Problems and Processing Methods of Deep Ultraviolet LED Lamp Beads

Deep ultraviolet LED lamp beads are gradually possessing the current electric lamp market with their high brightness, low energy consumption, and long life. Generally speaking, deep ultraviolet LED lamp beads are difficult to occur. In the effect of deep ultraviolet LED lamp beads, there are nothing more than three errors: the lights are not on, the lights become darker, and the lights flickered after turning off the lights. Today we will analyze and handle various functions one by one. There are two methods for the layout of deep ultraviolet LED lamp beads to lay out deep ultraviolet LED lamp beads, one is ceiling lamp, and the other is the gallbladder. What is the method of the lamp, the external layout is the same, divided into lamp beads and drivers. The lamp bead is closed on the shell of the ceiling or the red plastic part of the lamp. The yellow on this circuit board is the lamp bead. The lamp bead is the light of deep ultraviolet LED lamp beads. Drive Deep UV LED Lighting Bald Driver Device is at the bottom, and it can be seen on the surface. The driver of the ceiling lamp is a mysterious box, which must be the first device drive when the lamp lamps. Drives have the effects of constant current, antihypertensive, rectification, filtering and other effects. When the treatment method of deep ultraviolet LED lamp beads is not bright, when the lights are not bright, the main guarantee circuit shall not work. Assuming that it is a new electric light, it should be measured by an electric pen, or a incandescent lamp to see if there is voltage in the circuit. After the circuit does not work, you can check the following inspection. The driver's action is not on, and the role of the driver is the role of the driver. The demand for current and voltage of light -emitting diode is high, and the current, the voltage, the voltage or too small cannot be lit abnormally. Assuming that the lamp beads are not bright after turning on, the first should be the role of the driver. At this moment, you can buy a new driver intermittent communication. Deeping of the brightness of deep ultraviolet LED lamp beads. The brightness of the electric lamp becomes darker or not bright, which may be such an environment. Deep ultraviolet LED lamp beads are not bright and deep -ultraviolet LED lamp beads are divided into a string of string. Each string of lamp beads are connected in series. Therefore, a lamp bead on this string will cause this string of lamp beads to not light up. Assuming that a lamp bead is destroyed by each string, it will cause all the electric lights to not light up. Assuming that one lamp bead is destroyed, the capacitance or resistance on the driver must be used as an appropriate. The ruined lamp beads and abnormal lamp beads can be seen from the appearance. The destroyed lamp beads have a mysterious dot in the center of the center, and this dot can not be wiped off. In the red circle, the lamp beads that are destroyed assume that the number of lamp beads is not much, and the two welded feet behind the lamp bead can be welded together with electric iron. Assume that the number of lamp beads is excessive, it is recommended to buy a lamp bead plate and change it to prevent the lighting of illumination. Deep ultraviolet LED lamp beads flickering after turning off the lights after lighting, flashing, and flashing, the first thing to recognize the effect. The possible role is the zero line controlled by the switch. This kind of time must be corrected in real time to prevent danger. The accurate approach is to switch the outpost to control the outpost, and the zero line connects the electric light. Assuming that the circuit has no effect, it may be that the red light laser module has a self -sensing current. The most concise method is to buy a 220V relay, connect the coil to the electric light to deal with.

Several Problems and Processing Methods of Deep Ultraviolet LED Lamp Beads 1

Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

GET IN TOUCH WITH Us
recommended articles
Projects Info Center Blog
Dive into the world of UV disinfection. Here, you'll learn how this eco-friendly method cleans water. Find out how UV LED modules and diodes play a part in this. Also, see how UV technology benefits sewage treatment plants. Are you ready? Let's get started.
Water is an indispensable resource that is required for the survival of all life. However, water can also be a source of microorganisms and contaminants that pose a health risk to humans. Therefore, water must be treated prior to consumption or use. Ultraviolet purification is one of the most effective methods of water purification.
Bacteria and viruses are microscopic microorganisms that can cause a variety of maladies and conditions. To prevent the transmission of such diseases and illnesses, these microorganisms must be eliminated from surfaces and the air. Utilizing ultraviolet (UV) radiation is one effective method for achieving this. UVC light has been shown to be the most effective form of UV light for destroying bacteria and viruses.
Various water treatment technologies including UV water disinfection have been developed in response to the rising demand for pure drinking water. In recent years, Ultraviolet-C (UV-C) LED technology has garnered significant interest for its potential applications in potable water treatment. This technology has a number of advantages over conventional mercury-based UV lamps, including energy efficiency, lower operating costs, and a smaller environmental footprint.
Throughout the years, ultraviolet (UV) light as a disinfectant has gained popularity. UV LED has been used as a UV LED solution that is capable of killing a variety of microorganisms, including bacteria, viruses, and mold. It is also known as UV LED Disinfection process.
In the past, there were no UV LED lights available for commercial use. However, with advancements in LED technology leading to higher power densities, UV LED lights are now becoming more prevalent in the market, replacing traditional options.
Ultraviolet (UV) disinfection/water purification technology uses UV light to kill harmful microorganisms in water. It's a natural and effective way to purify water without adding chemicals, making it a popular choice for many households and industries. The process works by exposing water to a strong UV light source, which damages the DNA of bacteria, viruses, and other pathogens, causing them to die.
Have you ever thought about the tiny microbes hidden from the naked eye that can wreak havoc on our health? From harmful viruses and bacteria to mold and allergens, these microorganisms can threaten our well-being. Fortunately, various methods of disinfection can help us eliminate these unwanted guests. One of the most effective and eco-friendly options is UV disinfection.
Disinfection is key when it comes to keeping our surroundings clean and safe. From the surfaces we touch to the air we breathe, eliminating harmful pathogens is essential to maintaining a healthy environment. And while traditional disinfection methods such as chemical sprays and UV lamps have been around for years, a new player in town is making waves in the industry: UVC LED technology.
no data
one of the most professional UV LED suppliers in China
Contact Us

+86-0756-6986060

my@thuvled.com   

+86 13018495990      

my@thuvled.com

+86-760-86743190


You can find  us here
2207F Yingxin International Building, No.66 Shihua West Road, Jida, Xiangzhou District, Zhuhai City,Guangdong, China
Copyright ©  珠海是天辉电子有限公司 www.tianhui-led.com |Sitemap
Customer service
detect