Facing a new round of global industrial changes and new domestic economy, only companies that take the initiative to adjust can grab the opportunity in the future development and gain more development space. From the actual situation, the same is true of LED companies that are good at capturing market opportunities, attaching importance to innovation and development, and focusing on cultivating brand value, and the operating conditions are better; some LED SMEs with low technical content, lack of products, and inadequate adjustments are generally difficult to produce and operate. If you want to occupy a place in the intelligent manufacturing ecological chain in the future, you must always be prepared to meet the challenge at all times. (1) Strengthening the strength of a coordinated innovation capabilities not only depends on its endogenous innovation resources, but also depends on its ability to integrate society and global resources. The update speed of technology must be transformed into the alliance -style collaborative innovation and the open innovation of open innovation. This is the general trend of the current technological development, and it is also an inevitable requirement for the innovation and development of small and medium -sized enterprises. For small and medium -sized enterprises in the intelligent manufacturing ecological chain, we must also actively find opportunities to participate in cutting -edge technological innovation alliances with a global perspective and an open mindset. By integrating or using various excellent technological resources to improve their own innovation capabilities and their own innovation capabilities and their own innovation capabilities and their own innovation capabilities and various excellent technological resources Overall innovation strength, strive to obtain technological advantages in critical links, so as to gradually occupy a more favorable position in the collaborative innovation system and the industrial ecological chain. (2) Improve the standardization level In the intelligent manufacturing ecological chain, standards are everywhere, and cannot enter the standard system of intelligent manufacturing. From intelligent production, intelligent factories to intelligent logistics, a complete set of strict standard systems, such as realizing the intelligent interconnection of CNC equipment, the collaboration of production processes of different organizations, and quality process control, decision -making support systems, etc. The standards are all starting To the basic role. SMEs should actively explore organizational organizations that are responsible for standardized management. On the one hand, collecting domestic and foreign standards closely related to their own fields, and timely grasp the latest progress of industry standard information; on the other hand The connection and communication of upstream and downstream enterprises, actively participate in the formulation of new standards, and ensure the practicality and advancement of the standards. (3) Intelligent transformation In the intelligent manufacturing ecological chain, intelligent transformation is a choice that enterprises cannot bypass, especially for processing enterprises, it is even more urgent. Intelligent transformation is not only a single robot or intelligent device, but a systematic project. It is necessary to effectively connect R & D, production process, management and operation, etc., gradually improve the overall intelligence level, and finally establish a complete intelligent manufacturing system system. Of course, enterprises cannot blindly carry out intelligent transformation. They must be tailored and do their best. We must use intelligent transformation as a gradual evolution process. Starting from the most urgent stage, gradually improve. At the same time, we must also pay attention to the power of the government to actively strive for pilot demonstration; pay attention to learning the experience of peers, and avoid taking detours. (4) Promoting service transformation and transformation is an important trend of future development. For any type of enterprise, it is necessary to use service transformation to increase the added value of the product and maximize profits. Generally speaking, the process of service -oriented transformation of the enterprise is the process of reconstruction of business processes. The focus of service transformation is to focus on expanding product functions and meet user needs, and increase R & D design, logistics, marketing, after -sales service, corporate management, supply chain management Invest in service links such as brand management to increase the proportion of service value in the company's output value. At present, there are many successful cases of service -oriented transformation of manufacturing enterprises. For example, Qingdao red collar, a clothing company, has launched the first domestic clothing personalized customization platform through more than 2 million customers accumulated more than 2 million customers; Traditional processing companies such as Haier have also found new growth space through service transformation. (5) Pay attention to organizing innovation and business model innovation. With the widely used Internet to all aspects of industrial development, organizational innovation and business model innovation are becoming a new direction for industrial innovation and development. In the Internet environment, the relationship between enterprises and enterprises, between enterprises and consumers, and internal enterprises always change constantly. Enterprise organizations must continue to adjust and change with the changes in the external environment and internal conditions in order Growing up and developing, avoid rigidity and death. The market -oriented and user -centric development trend forces enterprises to continuously carry out business model innovation in order to provide richer services and more humane experiences, so that innovation results will be transformed into actual commercial value faster. For enterprises in the intelligent manufacturing ecological chain, technological innovation, organizational innovation, and business model innovation must be combined in order to better meet the needs of future development. LED professional manufacturers, with the most advanced testing equipment and fully automated production equipment in the industry, quality assurance, low light decay, good light effect consistency, energy saving, environmental protection, quality of survival with quality, seeking development with integrity, excellence, creating first -class creation product. Shenzhen Technology Co., Ltd. mainly operates LED lamp beads; high -pressure lamp beads; high -power LED lamp beads; patch LED lamp beads; SMD lamp beads; welcome to inquire: 13902912109 Mr. Jiang http://3535LED.1688.com310s stainless steel pipe individual individual Resume template 304 stainless steel pipe Tibetan scriptures




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

As a 11 -year -old manufacturer specializing in the production of UVLED curing machines in 11 years, Tianhui will continue to popularize some knowledge about UVLED optical curing equipment for free. UVLED optical curing equipment has attracted everyone's attention in recent years. It has excellent performance and efficient and energy -saving characteristics. After all, the device is the device. During the use process, factors such as frequency and maintenance methods will affect the performance of the UVLED optical curing machine. It is inevitable that a little problem is a little bit problematic. You dont have to worry about it. Unusual solution! First, the UV light of the UVLED device is not on or self -extinguished. If this problem occurs, first think of whether the UVLED light is aging, you can consider changing the UVLED light. In fact, it is not necessarily that the UVLED light is broken. If you are the UVLED optical curing machine of Tianhui you buy, you can see the display interface of the controller and operate according to the interface prompts. The UVLED device lights are not on. There are several reasons for the following aspects: 1> UVLED devices have abnormal signal input: such as high temperature alarm, traffic alarm, etc.; In this case Turn, whether the water -cooled machine is working normally, and is the water pipe blocked?. If the fan does not turn or the water cooling machine is abnormal, contact UVLED device manufacturer. 2> UVLED device circuit failure: If the cable is not tightly inserted, the internal circuit failure of the UVLED device, etc.; The cable is connected again, and the abnormality is still not resolved. There is a control power supply, but it cannot light up the UVLED light and the control panel abnormal light is not turned on before it is considered whether it is caused by the melting of the UVLED curing machine main circuit fuse. Then check whether the main circuit has a loose or short -ground circuit. Sometimes this phenomenon will appear when UVLED lights are old or deteriorated. If it is a device circuit failure, refer to the second point of the first point to solve it! Third, when the equipment is too high, when the temperature is too high, you must first consider whether the heat dissipation is not good. First check whether the fan runs normally, and clean up the dust at the fan. Using the environmental temperature is relatively high or the environment is harsh, Tianhui recommends that you can choose to buy a water -cooled UVLED curing machine to avoid the emergence of this situation. These three problems are more common when using UVLED curing devices, and the solution is relatively simple. I hope it can be helpful to everyone. If you also have questions about UVLED solidification, you can leave a message to Tianhui or directly call to consult and communicate!




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

The LED integrated light source module is a large -scale optical design, heat dissipation design, modeling, size design, and interface standardization design according to any form of application. And the function of replacement modules based on life, to largely reduce user costs. And the color rendering index (the ability to reproduce the real color) as one of the three important indicators to measure the quality of the white light source, and it is also an important criterion for measuring whether the LED light source module is healthy. The position in various indicators in the field of lighting is particularly obvious. Instructions for use: 1. At this stage, the light source of the light -emitting characters is mainly used in the conventional setting voltage LED three lights, five lights, and six -lamp LED integrated light source modules with DC12V. It is more common. The DC12V is the power supply, so if you don't install the switching power supply when installing the luminous characters, do not directly enter the market for the optometry or light source module directly to the market. 2. In order to avoid the long -term load work of the switching power supply, the switching power supply and LED load power is better at 1: 0.8, and the service life of the product will be more secure and long -lasting according to this. 3. If the LED integrated light source module exceeds 25 groups, the connection should be separated first, and then connects to the luminous font box in parallel from high -quality copper core wires greater than 1.5 square millimeters. More than 3 meters must be appropriately increased. In order to avoid short circuits, the end of the module must be cut and pasted. If necessary, use a self -attack screw to fix the outdoor use of the outdoor. , To have enough brightness, the module spacing brightness needs to be between 3-6cm, the thickness of the word can be selected between 5-15cm. 5. In the process of using LED integrated light source modules, be sure to pay attention to the problem of voltage drop. Do not just make one circuit, from the first series of linked tail. This will not only make the brightness inconsistent due to the different voltage between the first and tails, but also the problem of excessive single -circuit current burning the circuit board. The correct approach is to connect as much as possible to ensure that the voltage and current distribution is reasonable. 6. If you need to use anticorrosive materials inside the word cavity, try to use white primer to increase its reflection coefficient.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

Suitable for Car UV LED Air Purifier

State-of-the-art UV LED technology for airborne pathogen disinfection and photocatalytic purification

UVC LED disinfection, the ultraviolet sterilization rate is as high as 99%, using innovative UVC LED sterilization technology, non-toxic, mercury-free, radiation-free, and odor-free


Welcome to contact us.
Whatsapp/WeChat+8618575616990
Mailbox：winny@thuvled.com