The LED integrated light source module is a large -scale optical design, heat dissipation design, modeling, size design, and interface standardization design according to any form of application. And the function of replacement modules based on life, to largely reduce user costs. And the color rendering index (the ability to reproduce the real color) as one of the three important indicators to measure the quality of the white light source, and it is also an important criterion for measuring whether the LED light source module is healthy. The position in various indicators in the field of lighting is particularly obvious. Instructions for use: 1. At this stage, the light source of the light -emitting characters is mainly used in the conventional setting voltage LED three lights, five lights, and six -lamp LED integrated light source modules with DC12V. It is more common. The DC12V is the power supply, so if you don't install the switching power supply when installing the luminous characters, do not directly enter the market for the optometry or light source module directly to the market. 2. In order to avoid the long -term load work of the switching power supply, the switching power supply and LED load power is better at 1: 0.8, and the service life of the product will be more secure and long -lasting according to this. 3. If the LED integrated light source module exceeds 25 groups, the connection should be separated first, and then connects to the luminous font box in parallel from high -quality copper core wires greater than 1.5 square millimeters. More than 3 meters must be appropriately increased. In order to avoid short circuits, the end of the module must be cut and pasted. If necessary, use a self -attack screw to fix the outdoor use of the outdoor. , To have enough brightness, the module spacing brightness needs to be between 3-6cm, the thickness of the word can be selected between 5-15cm. 5. In the process of using LED integrated light source modules, be sure to pay attention to the problem of voltage drop. Do not just make one circuit, from the first series of linked tail. This will not only make the brightness inconsistent due to the different voltage between the first and tails, but also the problem of excessive single -circuit current burning the circuit board. The correct approach is to connect as much as possible to ensure that the voltage and current distribution is reasonable. 6. If you need to use anticorrosive materials inside the word cavity, try to use white primer to increase its reflection coefficient.
Author: Tianhui-Air Disinfection
Author: Tianhui-UV Led manufacturers
Author: Tianhui-UV water disinfection
Author: Tianhui-UV LED Solution
Author: Tianhui-UV Led diode
Author: Tianhui-UV Led diodes manufacturers
Author: Tianhui-UV Led module
Author: Tianhui-UV LED Printing System
Author: Tianhui-UV LED mosquito trap