In order to respond to the rapid change of the market, the LED industry has adjusted the organization and strategy direction in recent years. While continuously improving the lighting efficiency and the low cost of the killing price, it has been trying to enter the niche market to improve the profitability. At present, the mainstream applications of LEDs include mobile phones, large -sized backlight, lighting and vehicle growth momentum, and more and more LED factories have invested in niche market applications such as UVLED and IRLED. The LED industry is sluggish, and the emergence of the informal field applications will be stored in Chao Chao. In 2015, the global LED market output value is estimated to be about 14.52 billion US dollars, and the annual growth rate (YOY) fell to 2 %. Excluding negative and long -term situations during the fourth quarter settlement. It is stored in the current period that the LED industry has entered the current period. It is estimated that the global LED market compound annual growth rate (CAGR) in the next five years may only be about 3 %. Accelerating the elimination of invalid production capacity, forcing some manufacturers to withdraw from the market. As for the LED niche market applications such as Infrared, IR) LED, Ultraviolet (UV) LED, and are divided into UVA, UVB, UVC according to their different wavelengths, are relatively opportunities to drive demand growth. Taiwan factory cells, research crystal photovoltaic, and Nikkiso (Nikkiso) also expressed their views on the development of UVLED and IRLED in the conference. IRLED: Xie Mingxun, deputy general general general general general of the high crystal electricity R & D center of high crystal electricity research and development center, pointed out that UVLED and IRLED belong to the niche market. Although the current demand is not large, the profit is better. In terms of IRLED, the price of a single price is about the same. 8 to 16 times of size Blu -ray LED. Crystal has the UV to IR series spectrum LED chip. Among them, IRLED is mainly used in the two major categories of Security monitoring and sensor. In the field of security monitoring, applications include network surveillance cameras with IR850NM and 940NMLED, as well as Nightvision systems set in car headlights. The driving field can reach 150 to 200 meters, and it is also clearer. Xie Mingxun further stated that the night vision system should be the largest of IRLED demand. The sensor field is widely used. In addition to the proximitySensor module and wearable device for smartphones, it also includes the promising biosensors (BIO-Sensor) applications, such as detecting heartbeat With blood oxygen, the former uses IR530NM, 660nm, 940NMLED, and the latter uses IR660NM and 940nmled. In addition, for iris recognition applications that need special wavelengths, crystal electricity also has IR810NMLED to correspond, which is quite advantageous in competition. UVLED: Customized solutions cut into industrial and medical fields. According to analysis, the UVLED market penetration rate in 2014 reached 15 %, and the market size was about 122 million US dollars. The above; in the UVLED market, UVA accounts for 90 % of the proportion, and its largest application is UVCing. Wei Zhihong, chairman of Yanjing Optoelectronics, explained that the UV curing application covers medical adhesion, electronic part assembly, printing, coating, etc.;. He said that because these applications are different, UVLED is more difficult to replace traditional UV lights, and it must be built to replace the whole system. Wei Zhihong said that UVALED has been applied in the industrial field and has become popular. It is expected to grow significantly in the next two years, but he also admits that although UVLED gross profit is relatively high, he still has to overcome many obstacles to the market. UVALED is a highly customized market and is service -oriented. It must provide a comprehensive solution for customers. Single design cannot correspond Compromise. Another important market in UVLED is the Deepultraviolet (DUV) LED applied in the fields of sterilization, medical care, resin sclerosis and other fields. The Duvled product wavelength of the Nikkiso (Nikkiso) is between 250nm and 350nm. The Japanese machine installation manager CyrilperNot said that after years of continuous improvement of DUVLED products, the current 285nm products have increased from 30MW to 50MW at 350mA current. Water purification equipment module. The threshold of the unsightly light field is high, and the breakthrough challenge to promote industrial growth. Looking at the development of the unsight light field in LEDs, it is stored in IrLED and UVLEDs. However, because the threshold for entering this field is not low, it is not possible to enter the market smoothly without launching the right product. Taking IRLED for biosensions as an example, it must pass a series of tedious certification and take a long time. It also has to be imported by the brand manufacturer, so the opportunity is relatively difficult to evaluate; for most of the customized UVLEDs, manufacturers cannot be unable to use it. Like in the past, the cost of low -scale economic pressure must be adjusted to quickly change the corporate structure to quickly change according to the customized orders. It is still that the LED market will still have business opportunities in the future, and I look forward to breaking through innovation of related technologies and becoming a driving force for the next market to continue to grow.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

Ultraviolet rays are closely related to our lives. UVLED light sources are widely used: plant lights, photocatalytic purification, gem identification, UV curing, medical light therapy, etc., including protein testing and medical inventions, medical test analysis, ink printing, sterilization disinfection, banknote testing Wait. At present, deep -ultraviolet LED (that is, DUVLED) has not been fully opened in my country's market. Due to the difficulty of technology, many companies who want to enter this field are prohibitive. In addition to the eyes of discovery, it also needs strong technology as a support. In the past two days, the national UV light source and device technology seminars held in Wuxi let more than 100 participants understand the latest research results and industrial trends, and feel the unremitting pursuit of the pre -end practitioners' unremitting pursuit of technological progress. UV LED optical solidification applications in UV LED optical curing systems include UV adhesives that are applied in display screens, electronic medical care, instrumentation and other industries; UV coatings of building materials, furniture, home appliances, automobiles and other industries; printing, packaging, etc. The UV ink of the industry is solidified .. Among them, the UV LED panel industry has become a hot spot. The biggest advantage is that it can produce environmentally friendly plates that can be produced with formaldehyde, and the energy saving is 90%, the output is large, coin -resistant, comprehensive benefit economy, etc. advantage. According to the application in the application of organic exhaust gas treatment in the textile industry, the total amount of VOCS emissions in my country's textile industry accounts for about 30%of the total industrial VOCS emissions. VOCS is one of the forefront substances generated by haze and an important component for forming PM2.5. The optical catalysis of UVLED as a photocatalytic light source is better to treat VOCs, with the advantages of small volume, high catalytic activity, stable chemical properties, low cost, non -toxic and other advantages. The application of UV in the plant factory According to a researcher Liu Wenke of the Institute of Agricultural Environment and Sustainable Development of the Chinese Academy of Agricultural Sciences, it is easy to cause accumulation of self -toxic substances in the closed soil -free cultivation Root secretions and rice shell degradation products, sunlight contains only 3%of ultraviolet light, facility coverage materials such as glass filtering more than 60%, and cannot be applied in facilities; Poor sexual production needs to meet the needs of facilities and vegetable factory production. It is developed to develop a suitable facility gardening for soil cultivation, especially the artificial light TIO2 photocatalytic system suitable for plant factories. It is urgent and the potential for commercialization is huge. There are more than 60 artificial optical plant factories in my country, and about tens of thousands of hectares of greenhouse cultivation. UV LED is PM2.5 gram -the application in various oil fume purification equipment comes from Haining Yatuang report. UV light -decomposed oxide cigarette purification system is currently the most advanced light -solving oil -oxide cigarette purification system in China. In this purification system, the purification system , Special -made 185nm254nm UV lamp tube plays a role in the core. It can decompose the oil and odor in the kitchen air, as well as the advantages of secondary pollution, reducing fire hazards, small volume, important lightness, and great reduction in maintenance costs. What will happen in the future of ultraviolet lights? In 20, the sales of traditional UV lamps reached 33.2m, the turnover reached $ 495.4m, the UVLED business will grow rapidly from $ 45M in 2011 to $ 270m in 2017. During this period, the UVLED ($ M) market will be The increase of 6 times, while the growth of low -pressure UV lamps in the same period is only 1.6 times. The solidification market is the only all -round and full -cycle application product market. UVA LED will quickly replace 50%of the low -pressure mercury lamp market, UV market real capacity (Total $ 460M), UVLED real capacity (Total $ 60m), UVALED real capacity (TOTAL $ 52M). In the low -end market, UVLED is dominated by UVA (pretty stable maintenance of 40%of the year), and the selectivity of UVALED width wavelength will dominate the market, and the current market share is smaller. The UVLED curing product market should be concentrated, and the single -point curing UVLED device will occupy more than 95%of the market share in the next 5 years. Market product classification: At present, the main market is: UV-LED point light source curing machine, UV-LED wire light source curing machine, UV-LED surface light source curing machine, portable UV-LED curing device. So, the question is, how can I get in touch with us? Tel: 130 4883 4002 Mr. Fu 1536107848 Email:




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

In the formation of optical lenses, UV glue is generally used, and UV glue needs UVLED curing machines for irradiation and curing. When pre -curing in the lens, first use the UVLED dot -point light source to pre -cured, verify that the focal length is appropriate, and then thoroughly solidify. The role of pre -curing is to check whether it is a good product. If you need to adjust it, you only need to gently scrape the UV glue. This step greatly improves the yield of optical lens bonding. At present, in the field of optical lenses, this UV pre -curing process has basically popularized. Why does the adhesion of optical lenses need to use Tianhui's UVLED curing machine? Mainly because the UVLED curing machine produced by Tianhui has the following advantages: 1. Super long life: Tianhui's UV curing machine's service life is more than 10 times that of traditional mercury lamp curing machines, about 25,000 30,000 hours. Generally, it can be used for 3 years to 3 years to it. Four years; 2. Cold light sources, no heat radiation, and the temperature of the photo is low; 3. The heat of the heat can solve the problem of large thermal calories and the unbearable staff of the mercury lamp. You need to warm up 100%power UV output immediately; 5. The service life is not affected by the number of opens and closes; 6. The energy is high, the light output is stable, the lighting is uniform, and the production efficiency is improved; ; 8. No mercury contains, and does not produce ozone, which is a safer and more environmentally friendly choice to replace traditional UV light source technology; Save 90%of the electricity; 10. The maintenance cost is almost zero, and the UV-LED curing equipment is used to save the consumables at least/sets per year; 11. The volume is small and does not require the exhaust system. Customers in the Little Optical Speed Industry provide high cost -effective solutions and products, and have been well received by customers. If you are also the field of optical lens, you need UV curing machines, you may wish to contact Tianhui!




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

With the rapid development and popularization of UV LED, many manufacturers have chosen to replace the UV LED device and test. Bottle printing: UV LED curing technology can be fully used on the bottle label machine. After the system is set, it can be printed directly to the cylindrical describer. Because the light source of UVLED is small, it is very suitable for installation to a limited printed machine, and the heat load is reduced It also achieved printing on a thin and high heat sensitivity substrate. Tags and packaging (rotation machine): The UV LED curing system can be simply used on the label printer to help users print high -quality materials at the maximum speed. The UV LED curing system for labeling can improve production, reduce power consumption, reduce polyester film tablets, and have a lower impact on the environment. Coding and marking: The structure of UV LED curing equipment is small, high in performance, and low energy consumption, which is very suitable for Yongyu encoding and mark printing. UV LED can be used immediately, so only when the ink is solidified, this will save energy and extend the service life of the device. Therefore, UV LED curing technology is an ideal choice for high pixel printing. For more information, welcome to enter the official website




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap