[UVLED Solidification] Optical Lens Forming a Glue Combination Process Is More Suitable to Use Tianhui's UVLED Curing Machine

In the formation of optical lenses, UV glue is generally used, and UV glue needs UVLED curing machines for irradiation and curing. When pre -curing in the lens, first use the UVLED dot -point light source to pre -cured, verify that the focal length is appropriate, and then thoroughly solidify. The role of pre -curing is to check whether it is a good product. If you need to adjust it, you only need to gently scrape the UV glue. This step greatly improves the yield of optical lens bonding. At present, in the field of optical lenses, this UV pre -curing process has basically popularized. Why does the adhesion of optical lenses need to use Tianhui's UVLED curing machine? Mainly because the UVLED curing machine produced by Tianhui has the following advantages: 1. Super long life: Tianhui's UV curing machine's service life is more than 10 times that of traditional mercury lamp curing machines, about 25,000 30,000 hours. Generally, it can be used for 3 years to 3 years to it. Four years; 2. Cold light sources, no heat radiation, and the temperature of the photo is low; 3. The heat of the heat can solve the problem of large thermal calories and the unbearable staff of the mercury lamp. You need to warm up 100%power UV output immediately; 5. The service life is not affected by the number of opens and closes; 6. The energy is high, the light output is stable, the lighting is uniform, and the production efficiency is improved; ; 8. No mercury contains, and does not produce ozone, which is a safer and more environmentally friendly choice to replace traditional UV light source technology; Save 90%of the electricity; 10. The maintenance cost is almost zero, and the UV-LED curing equipment is used to save the consumables at least/sets per year; 11. The volume is small and does not require the exhaust system. Customers in the Little Optical Speed Industry provide high cost -effective solutions and products, and have been well received by customers. If you are also the field of optical lens, you need UV curing machines, you may wish to contact Tianhui!