Plant lighting has become one of the directions of the key layout of LED enterprises. And this layout has also improved the performance of related enterprises. Most companies benefit from plant lighting. In the first half of last year, revenue has dazzling results. However, since the third quarter of 2021, the plant with LED red light chips has been crowded out of the demand for vehicle and infrared LED markets, especially in high -end chips. At the same time, the power -driven IC is still out of stock. The delay of the shipping ship and the illegal grid of the North American indoor marijuana also affect the performance of the terminal product. The rapid development of plant lighting covered a shadow. Should I go to the wind and snow, or go to the ice, or take it time to stop, and accept it if I see it? In order to understand the company's layout and strategy, Ledinside conducts in -depth communication with the pain points, difficulties, and market development trends of plant lighting. Traditional Lighting VS Plant Lighting: Requirements and higher thresholds. LED plant lighting is very different from traditional lighting. It is mainly manifested in the use of scenarios, performance, technology, etc. This also makes LED plant lighting have a high industry threshold. Optical plant lighting LED lamp bead products put forward higher requirements for the system's research and development capabilities, independent innovation capabilities, quality and cost management and control capabilities. Among them, the difference between technology research and development and other lighting products mainly lies in the design of the optical formula. In terms of chips, plant lighting products are mainly concerned about photosynthetic photonic efficacy PPE/photosynthetic photon flux PPF, and ordinary lighting mainly focuses on LM and blue light and other issues. Different uses, customers have different requirements for chip performance. LED plant lighting requires chips to have higher light effects and higher reliability. When pursuing the light efficiency of 230lm/W, you need to use special optimized substrate, inverted chips, special reflectors and other technologies; when pursuing high reliability, the selection of process control and key raw materials is proposed. Extremely required. On the packaging end, the biggest difficulty of entering the LED plant lighting market is that the development and production of a high -yield, high -quality LED plant light source or lamps need to solve the integrated development of light environment intelligent regulation, plant optical biology, and LED semiconductor technology. The problem. The difference between plant lighting and traditional lighting is that plant lighting is more compatible with the characteristics of plant growth. It is necessary to consider from the level of biological optical. Adjust the spectral formula. In this regard, the National Star Optoelectronics is also at the forefront of the market. There are professional plant growth laboratories, and there are also spectral databases that simulate the growth of plant growth. Entering the plant lighting market not only requires light sources and module technology reserves, but also needs to understand the market and policy direction. In addition, for different regions, different plants, different growth stages of the same plant, etc., the most suitable and efficient "light formula" database and corresponding scheme must be established. Plant lighting is mainly high -power and high -light products, and enterprises need to accumulate for a long time in LED packaging technology. At the same time, customers have high life for LED plant lighting products, and the product needs 5-10 years of quality assurance. Plant lighting products are special lighting products for plant supplement light occasions. For example, according to the application objects of plant lighting, you need to design a spectrum that can cause specific reactions of plants; according to the particularity of the spectrum, the rich and adjustable spectral performance of LEDs is needed to achieve and optimize the spectral spectrum. From the perspective of packaging, excellent packaging technology requires high -light quantum efficiency high -reliability products, and also requires excellent optical design to maximize the distribution of light and strength. The three major thresholds in the field of LED plant lighting drivers: 1. Technical threshold: Plant lighting drivers are developing in a higher power direction. At present, the power supply on the market has reached 1200W, which may be improved again in the future. Design and production capacity have put forward great challenges. 2. Intelligent design threshold: Plants need different light in different growth stages. The control requirements for light are the requirements for the intelligent control of the power supply. 3. Market threshold: It is reported that both the quality of the product and the company itself are facing the customer's trust and recognition issues. If there is no appropriate entry point, the customer will not rush into a new manufacturer as a supplier as a supplier. Terminal growers' recognition and acceptance of LED plant lighting technology have reached a higher level, and their willingness to use LED plant lighting is also stronger and stronger, but LED plant lighting has high investment in the early stage, and the input -output ratio has become terminal growers. Major concerns. In the application scenario of plant lighting, electricity bills are the highest proportion of customer expenditure. Therefore, the difficulty of promoting current promotion is concentrated on how to balance the increase in short -term costs and long -term benefits. LED plant lighting prospects are broad. In addition to emerging products, traditional planting manufacturers will also use LEDs to replace traditional lighting. However, the one -time investment in LED plant lighting is high and the effect is long, which has become the main concern of the farmer's current concern. At present, the main market of LED plant lighting is overseas, which is affected by many factors such. But at the same time, the domestic market is also gradually developing. In the future, with the progress of LED technology and the unremitting pursuit of quality, the domestic market will gradually develop. Plant lighting is developing in a professional, efficient, and intelligent direction, but LED plant lighting high -quality manufacturers are mainly concentrated abroad. The layout of domestic manufacturers is not very obvious. On the one hand, the domestic plant lighting industry is in the early stage of development, and the products are still mainly exported by low -end products; on the other hand, due to the problems of low input -output ratio and expensive output products in domestic plant factories, this also becomes becoming a problem. The main obstacles to develop plant lighting in LED enterprises. In addition, the absence of industry standards is also a problem that plant lighting needs to be solved in promotion. The establishment of the plant lighting industry standards will play a very important role in the standardization of the plant lighting industry and the guidance of the technical direction, which can avoid the direction of the enterprise's wrong direction and reduce the waste of social resources. In addition, the establishment of industry standards can also enhance the trust of end users to plant lighting products, thereby accelerating the use of the downstream planting market for the use of plant lighting fixtures. Plant lighting is a multi -disciplinary comprehensive technology field. The industry lacks unified standards. At the same time, plant lighting is more conventional lighting compared to the actual needs of customers, use scenarios, etc. There is no doubt that the establishment of the standard of the plant lighting industry helps to promote the orderly development of the entire plant lighting field, but the establishment of industry standards can not be completed overnight. The people take food as the sky. Food is an indispensable part of human survival and development. LED plant lighting solves the impact and restrictions on the growth of plant growth on climate, geography, space, etc., and can accelerate the growth of plants and reduce the use of chemicals in a scientific way. In addition, LED plant lighting naturally has the attributes of environmental protection and energy conservation, which is an extremely important part of smart agriculture with science and technology as its core. It is worth noting that although LED plant lighting has a bright development prospect, its short -term development is dual constraints of internal and external factors. On the one hand, there are still many problems in LED plant lighting. At present, the industry's lack of understanding of the elements of different plant growth elements. For example, the best needs of different crops in different growth stages still need to be further studied. At the same time, it is not easy to integrate a more leading intelligent control system on the existing lamps. On the other hand, the external environment soil of LED plant lighting is not very fertile. The same party believes that in the face of the development of the global food crisis and smart agriculture, the trend of the plant lighting market in the future will become normal development, but in the short term, the policy guidance of the international market will have a greater impact on the plant lighting market. It is undeniable that LED plant lighting technology can improve the quality of crops and improve the taste of crops in the maturity period when the maturity period of the crops can be used to help the terminal growers reduce production costs. Looking forward to the future, under the requirements of ensuring food safety, people will build agricultural development in indoor and build vertical farm investment to shorten the food supply chain, and the global plant lighting LED market size will continue to rise. At the same time, with the long -term introduction of LED lighting equipment such as the greenhouse plantation owner and the emerging vertical farm planting owner, and the cost of LED lamps is expected to decline, it can further enhance the willingness of more indoor planting owners to replace traditional products into LED lamps and become pushing Improvement of future plant lighting LED market growth is important. [Label of this article] LED lamp bead manufacturer LED lamp beads light -emitting diode patch LED lamp bead plug -in LED lamp beads [Responsible editor]




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

Facing a new round of global industrial changes and new domestic economy, only companies that take the initiative to adjust can grab the opportunity in the future development and gain more development space. From the actual situation, the same is true of LED companies that are good at capturing market opportunities, attaching importance to innovation and development, and focusing on cultivating brand value, and the operating conditions are better; some LED SMEs with low technical content, lack of products, and inadequate adjustments are generally difficult to produce and operate. If you want to occupy a place in the intelligent manufacturing ecological chain in the future, you must always be prepared to meet the challenge at all times. (1) Strengthening the strength of a coordinated innovation capabilities not only depends on its endogenous innovation resources, but also depends on its ability to integrate society and global resources. The update speed of technology must be transformed into the alliance -style collaborative innovation and the open innovation of open innovation. This is the general trend of the current technological development, and it is also an inevitable requirement for the innovation and development of small and medium -sized enterprises. For small and medium -sized enterprises in the intelligent manufacturing ecological chain, we must also actively find opportunities to participate in cutting -edge technological innovation alliances with a global perspective and an open mindset. By integrating or using various excellent technological resources to improve their own innovation capabilities and their own innovation capabilities and their own innovation capabilities and their own innovation capabilities and various excellent technological resources Overall innovation strength, strive to obtain technological advantages in critical links, so as to gradually occupy a more favorable position in the collaborative innovation system and the industrial ecological chain. (2) Improve the standardization level In the intelligent manufacturing ecological chain, standards are everywhere, and cannot enter the standard system of intelligent manufacturing. From intelligent production, intelligent factories to intelligent logistics, a complete set of strict standard systems, such as realizing the intelligent interconnection of CNC equipment, the collaboration of production processes of different organizations, and quality process control, decision -making support systems, etc. The standards are all starting To the basic role. SMEs should actively explore organizational organizations that are responsible for standardized management. On the one hand, collecting domestic and foreign standards closely related to their own fields, and timely grasp the latest progress of industry standard information; on the other hand The connection and communication of upstream and downstream enterprises, actively participate in the formulation of new standards, and ensure the practicality and advancement of the standards. (3) Intelligent transformation In the intelligent manufacturing ecological chain, intelligent transformation is a choice that enterprises cannot bypass, especially for processing enterprises, it is even more urgent. Intelligent transformation is not only a single robot or intelligent device, but a systematic project. It is necessary to effectively connect R & D, production process, management and operation, etc., gradually improve the overall intelligence level, and finally establish a complete intelligent manufacturing system system. Of course, enterprises cannot blindly carry out intelligent transformation. They must be tailored and do their best. We must use intelligent transformation as a gradual evolution process. Starting from the most urgent stage, gradually improve. At the same time, we must also pay attention to the power of the government to actively strive for pilot demonstration; pay attention to learning the experience of peers, and avoid taking detours. (4) Promoting service transformation and transformation is an important trend of future development. For any type of enterprise, it is necessary to use service transformation to increase the added value of the product and maximize profits. Generally speaking, the process of service -oriented transformation of the enterprise is the process of reconstruction of business processes. The focus of service transformation is to focus on expanding product functions and meet user needs, and increase R & D design, logistics, marketing, after -sales service, corporate management, supply chain management Invest in service links such as brand management to increase the proportion of service value in the company's output value. At present, there are many successful cases of service -oriented transformation of manufacturing enterprises. For example, Qingdao red collar, a clothing company, has launched the first domestic clothing personalized customization platform through more than 2 million customers accumulated more than 2 million customers; Traditional processing companies such as Haier have also found new growth space through service transformation. (5) Pay attention to organizing innovation and business model innovation. With the widely used Internet to all aspects of industrial development, organizational innovation and business model innovation are becoming a new direction for industrial innovation and development. In the Internet environment, the relationship between enterprises and enterprises, between enterprises and consumers, and internal enterprises always change constantly. Enterprise organizations must continue to adjust and change with the changes in the external environment and internal conditions in order Growing up and developing, avoid rigidity and death. The market -oriented and user -centric development trend forces enterprises to continuously carry out business model innovation in order to provide richer services and more humane experiences, so that innovation results will be transformed into actual commercial value faster. For enterprises in the intelligent manufacturing ecological chain, technological innovation, organizational innovation, and business model innovation must be combined in order to better meet the needs of future development. LED professional manufacturers, with the most advanced testing equipment and fully automated production equipment in the industry, quality assurance, low light decay, good light effect consistency, energy saving, environmental protection, quality of survival with quality, seeking development with integrity, excellence, creating first -class creation product. Shenzhen Technology Co., Ltd. mainly operates LED lamp beads; high -pressure lamp beads; high -power LED lamp beads; patch LED lamp beads; SMD lamp beads; welcome to inquire: 13902912109 Mr. Jiang http://3535LED.1688.com310s stainless steel pipe individual individual Resume template 304 stainless steel pipe Tibetan scriptures




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

The conversion of new and old kinetic energy is also a must -have for many companies that are not saturated enough, and they will not replace the existing backward ultraviolet curing equipment; without the existing old equipment, there is not enough ability to get new orders. The phenomenon of the survival of the micro -enterprise is also a strange circle that must be broken. The new UVLED curing machine technology has achieved proud results in the field of ultraviolet light curing. It is also a new favorite in the capital market in recent years. Tianhui deeply cultivated UVLED ultraviolet light curing in the industry for more than ten years. Experience tells us that to strengthen the company's own competitiveness, we must break the above strange circle and introduce new technologies and new technologies. After more than ten years of development, UVLED, as a new star in the field of ultraviolet light curing, has become more and more obvious compared to the traditional UV curing technology. Especially after 2020 In the environment of execution, UVLED technology is used, which is both energy -saving and environmentally friendly and high -efficiency light sources. However, it is undeniable that because the application fields involved in ultraviolet technology are very broad, and at the same time, it is limited by the light effects of the UVLED lamps itself and the limitations of the design capabilities of solutions. Successfully import UVLED technology into it, forming a batch. Tianhui Technology Development Co., Ltd. specializes in the development, production, sales and technical services of UVLED curing equipment. It is a professional UVLED light source manufacturer. Since the establishment of the company, Tianhui Technology, which has outstanding employees, has attached great importance to the investment in technology research and development. For more than ten years, he has invested heavily and prepared a lot of samples for customers. Light source, using large brand lamp beads, optimized heat dissipation design, is committed to providing customers with stable and efficient products.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

Infrared receiving head is an integrated receiver composed of infrared receiving tube and amplifier circuit. The amplifier circuit is generally composed of a collection of blocks and multiple resistance capacitors, and it needs to be packaged in a metal material shielding box. Therefore, the circuit is very complicated, but the volume is small. Generally speaking, there are two ways to distinguish infrared receiving head pins: 1. 蕞 Simple is to allow infrared receiving head suppliers to provide model specifications. Customers can distinguish the pins of infrared receiving head according to the specification book; 2. It is a multimeter test testing The resistance of the two pins, find one with a small resistance value in the two pins. Do not move the pen. The red table is connected with VCC and the black tablet. The other pin is the signal pin. The three pins of the infrared receiving head are GND, VCC, OUT 3 pins, each of which is ground, power and signal output. The models of infrared receiving heads are different, and their pins are different. The gain of the internal amplifier inside the infrared receiver is very large, and it is very easy to cause interference. Therefore. Infrared receiving head: Infrared receiving heads are generally receiving, amplifying, and demodulation heads. Generally“0”and“1”The difference is usually reflected in the length of the level or the signal cycle. When the single -chip microcomputer decodes, the receiving header output foot is usually connected to the external interrupt of the single -chip microcomputer. The top priority is to find data“0”and“1”The difference between waveforms. The output end can be connected to the CMOS and TTL power supply circuits. This kind of receiving head is generally used in household appliances such as air conditioners, TVs, VCDs.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

The UVLED curing system has a long life than mercury lamps, but there is still a certain life span. The life of the UVLED curing machine and the materials of the equipment are related to the time use. We take the product of Zhuhai Zhuhai Tianhua Electronic Co., as an example to briefly talk about the maintenance of UVLED curing machines. 1> Ensure that the working environment is clean and tidy, the temperature and humidity adaptation are used to prevent the equipment from moisture and leakage. 2> Wipe off the surface dust on the surface to prevent the inside of the UVLED device. 3> Keep the equipment in the air and the smooth outlet, prevent the heat emissions during work, cause the equipment to be damaged. 4> Check the light source of the light source every day, and confirm whether the lamp beads are not glowing. Whether the light beads luminous color are abnormal. If there is the above situation, replace the lamp beads in time. 5> Regularly measure the light power metering of the light power meter is abnormal.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap