The UVLED furnace is also called LEDUV curing furnace and UVLED oven. Here "UVLED" is an English abbreviation for LED ultraviolet rays. CICS refers to the process of changing material from low molecules to polymer. UV curing generally requires the curing conditions or requirements of ultraviolet curing coatings (paint), adhesive (glue) or other seal sealing agents. The role and advantages of UVLED furnace equipment 1. The difference between UVLED light sources and traditional high -pressure mercury light curing equipment A: The UV light generated by traditional curing machines looks bright and the calories are very high. In fact, its spectral spectrum is wide. A certain ultraviolet spectrum segment that truly solidified only accounted for part of its energy. A considerable part of the visible light segment (miscellaneous) and generated heat, which was severely damage to the operator and easily deforms the heat of processing workpieces. B: The UVLED furnace is a high -purity single -wave length ultraviolet light, which belongs to the cold source; the temperature of the workpiece is only about 3 degrees, and the processing parts will not be deformed. The solidification effect of high-pressure mercury lamps of 1000-2000mW of 1000-2000mW is comparable, which shortens the curing time to 0.5S2 and UVLED furnaces significantly reduced production costs. Life) Energy -saving design, only when it needs to be illuminated, the power consumption is low, and the power: about 50W. B: The UVLED furnace body is small and light, which can easily integrate it into the automatic assembly process, or use it as a complete desktop system. C: The LED irradiation head is controlled by the computer. You can choose manual or automatic control according to actual needs, and set the time required for light irradiation (accurate to 0.01S) to further support high -precision junction needs, reducing the time error of human operation time errors. More information is welcome to log in




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

Infrared lamps are very helpful for night vision monitoring, but how to extend the life of infrared lights to become recognized as a recognized problem. Below, come to understand with the editor. The service life of a single LED infrared lamp is still relatively long, but the number of LED infrared lamps on the infrared lamp in the infrared camera (including 32PCS, 36PCS, 42PCS, etc.). Therefore Overall calories. If the heat dissipation is not good, the aging of infrared cameras will be too fast, thereby reducing the life of the infrared camera. If the temperature continues to be too high, it will damage other accessories of the infrared camera. According to the above analysis, we can know that too high temperature is the main factor that causes the short life of LED infrared lights. If it does not affect the effect of infrared irradiation, the service life of LED infrared lights should be improved. The design and reasonable match of the component are very important. First of all, choose high -power, low -current LED infrared lights when choosing. This not only guarantees the brightness, but also does not have a large current, causing the overall temperature of the infrared camera to increase. Second, for the application of the substrate, the aluminum is a good choice. Compared with other metal characteristics, aluminum metal has a good heat dissipation function. Therefore, while ensuring the constant temperature, it can also save the negative impact of the cooling fan. Again, it is the problem of reducing the exposure of infrared lights. Install an aluminum metal plate in the middle of the LED infrared light and the lens to prevent the LED infrared lamp's light interference problem. In addition to the improvement of technology, the cooperation of the environment is also very important. For example, using metal film reflection, using high -efficiency optical lenses, etc., can achieve the growth of lighting capacity, thereby reducing the work pressure of infrared lights. In addition, using a stable current and realizing the separate power supply of the lights can reduce the damage caused by the unstable power of the power, or remove the overall infrared light due to a small amount of infrared lamp problems.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

The integrated light source is to gather small lamp beads together and gather. Let me briefly introduce the characteristics and advantages of integrated light sources. 1. Integrated light source characteristics: 1. High emitting efficiency, LED lamp beads have improved after decades of technical improvement, and their luminous efficiency has improved greatly. And the monochromaticity of its light, narrow spectrum, no filter can emit a colored visible light directly. 2. Little power consumption. 3. Long service life, use electronic light field radiation, filament light, easy to burn, heat sink, light attenuation and other shortcomings. The LED lamp beads are small, light weight, and epoxy resin packaging can withstand high temperature intensity equipment impact and vibration, not easy to break. 4. Strong safety and reliability, low heat, no heat radiation, cold light sources, can be safely touched: can accurately control the light and luminous angle, soft color, no glare, no mercury, elements of elements may endanger health, etc. Substance. The built -in micro -processing system can control the light strength, adjust the lighting method, and realize the combination of light and art. 5. It is conducive to environmentally friendly LED lamp beads for all -solid luminescence, earthquake resistance, impact resistance, waste can be recycled, no pollution. The volume of the light source is small and can be combined at will. It is easy to develop into lightweight and short and short lighting products, which is also convenient for installation and maintenance. Second, the advantages of integrated light sources are different from the luminous principles of incandescent lamps and gas discharge lamps. Beads can also reach 50%of the energy -saving effect compared to the fluorescent lamp. LED lamp beads with a light effect of 75LM/W are reduced by about 80%of the incandescent lights of the same brightness. The energy saving effect is significant. This is undoubtedly very important for China with tight energy sources. LED lamp beads can also be applied with solar cells, energy saving and environmental protection. It does not contain toxic and harmful substances (such as mercury), which avoids the secondary pollution of the fluorescent lamp rupture and overflowing mercury. LED lamp beads light sources are not only more environmentally friendly and energy -saving, but also the shutdown color gamut of LED light sources is wider and higher in color saturation. More importantly, the service life of LED lamp beads is 60,000 hours, which can be able to solve the traditional bulb light source source. The problem of short life.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

What are the classifications of LED light source modules? According to the color type, it can be divided into three types: monochrome, colorful, and full -color single -point control. Monochrome is a single color module. Generally, there are red, green, yellow, white, etc. are more commonly used; colorful LED light source modules It is a module product that is transformed by seven different colors. It has more colors and more variable; compared with colorful LED light source modules is richer, it can achieve full -time color changes, not only very beautiful, only very beautiful, only very beautiful, only very beautiful. And full of dynamics, it can also be more attractive. According to the power of a single LED, it can be divided into three types: small power (less than 0.3W), medium power (0.3-0.5W), and high power (1W and above). Modules with high power are higher than small power in brightness in brightness in brightness. , And longer, it is the development trend of the entire LED lighting in the future, and it is more practical. According to sealing, it can be divided into two types: waterproof and non -waterproof. Waterproof and non -waterproof modules are mainly distinguished by the application environment. Generally, waterproof LED modules can be used for outdoor lighting and promotion. The waterproof module is mainly used in the room more. Of course, waterproof modules are higher than waterproof in price. According to the shape of the LED, the LED module is divided into: direct -inserted LED module, 食 食 食 LED module, patch LED light source module. The LED light source module requires that the voltage of the LED ranges from 2-9V, and the power also has a wide range. Which LED is used to depend on the technical requirements of this module as a product. For example, this LED module needs to output 10LM light. It is better to use two LEDs in the appearance. You can choose a 5LM LED. Combining color (LED voltage is related to color), temperature, quality and other factors, you can find a suitable product LED. Instructions for the use of LED light source modules I. At this stage, the light source of the light is mainly used in the LED three lamps, five lights, and six lamps with the input voltage of the light. The output DC12V is the power supply, so if you don't install the switch power supply when installing the luminous characters, do not put the light -emitted or LED light source module directly into the market to communicate with 220V. Otherwise, the LED light source module will burn out due. 2. In order to avoid the long -term load work of the switching power supply, the switching power supply and LED load power better is 1: 0.8, and the service life of the product will be more secure and long -lasting according to this. Third, if the module exceeds 25 groups, it should be connected separately, and then connects to the light -emitting box in parallel from high -quality copper core wires greater than 1.5 square millimeters. Properly increase the line diameter. In order to avoid short circuits, the end of the module must be cut and paste. If necessary, use a self -attack screw to fix the outdoor use of outdoor use, Brightness. LED light source module distance visual brightness requires between 3 and 6cm, the thickness of the word can be selected between 5 and 15cm. There are two types of LED light for luminous characters: Mermaid and small straw hat. Earnian light module is suitable for the glowing characters between 8-15cm height between the wall wall?. Fifth, in the process of using the light -emitting LED light source module, be sure to pay attention to the problem of voltage drop. Never do only one loop, from the first series of connecting tail. This will not only make the brightness inconsistent due to the different voltage between the first and tails, but also the problem of excessive single -circuit current burning the circuit board. The correct approach is to connect as much as possible to ensure that the voltage and current distribution is reasonable. 6. For the inside of the word cavity, if you need to use anticorrosive materials, it is recommended to use white primer to increase its reflection coefficient. The above is the classification of the LED light source module, as well as the requirements of the LED light source module and instructions!




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

According to the differences between its biological effects, the purple UVLED can be divided into UV-A (320-400nm), UV-B (275-320nm), UV-C (200-275nm), and vacuum purple,. In the water treatment, the UV-C part of the purple-light UVLED disinfection device is actually proven to be the highest fungicular UVLED near 260nm in this band. Ziguang UVLED disinfectant integrates comprehensive science such as optical, microbiology, machinery, chemistry, electronics, fluid mechanics. UV-C light produced by specially designed high-efficiency, high-intensity, and long-lived UV-C lights produced by specially designed a strong UV-C light water generated by the device. When the water in the water is subject to the ultraviolet UV-C light (wavelength 253.7nm) of the purple-light UVLED disinfectioner. Its cell DNA and structure are destroyed, and cell regeneration cannot be performed, so as to achieve water disinfection and purification of water. The spectrum line with a wavelength of Purple UVLED disinfectant can also break down the organic molecules in the water, produce hydrogen -based free radicals and oxidize the organic molecules in the water to carbon dioxide to achieve the purpose of removing TOC. Ziguang (UV) disinfection technology for bacterial viruses and other pathogenic disinfection is already recognized in the world. Society is also increasingly applying the principle of high -tech antivirus. For its disinfection methods, what advantages does Ziguang (UV) water disinfection technology have? One: High -efficiency sterilization, purple light (UV) to kill bacteria and viruses is generally within one second. For traditional ultraviolet rays, chlorine gas is used in ozone, and the effect of purple light (UV) generally takes 20 minutes to 1 hour. Two: It is safe and reliable. Traditional disinfection techniques are chloride or ozone, and the disinfection agent itself belongs to highly toxic, flammable and explosive substances. The use of these substances on the operating site's surrounding environment and the safety of residents have potential threats. Modern ultraviolet disinfection technology does not exist in such safety hazards. Three: No secondary pollution. Because purple light (UV) technology can be controlled as sterilization and does not add any chemical agents, it will not cause secondary pollution to the water body and the surrounding environment, and does not change any component in the water. Four: continuous large water disinfection, modern Ziguang (UV) disinfection equipment can run 365 days a year, and run continuously 24 hours a day. Except for regular maintenance within one or two hours, the best operating conditions are 24 hours continuously. Five: Simple operation and maintenance and low cost. Due to the improvement of the core technology of Ziguang (UV) in the 1990s, ultraviolet disinfection technology is not only the highest among all disinfection methods, but also the simplest disinfection operation and maintenance. 4 % per ton of water or even lower. Therefore, its cost performance is the highest among all disinfection technology. It not only has the advantages of high efficiency that other disinfection techniques cannot compare, but also have the advantages of low cost and operating costs. Six: wide application fields, in all current disinfection technologies, none of them, like purple light (UV) technology, have such a wide range of application fields. It can not only disinfect fresh water, but also disinfect seawater; not only can disinfect drinking water, but also disinfected wastewater. It can be widely used in various areas that need water disinfection. For example: freshwater, seawater disinfection, shellfish purification, agricultural processing water, drinking pure water, electronics, medicine, and biological industries ultra -pure water, various beverages, beer and food processing, sewage treatment, disinfection of tap water, disinfection of sewage treatment. Swimming pools, urban fountain decoration water, central air -conditioning and power stations and other cooling water, and military bases, ships, submarine water, etc.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap