[UVLED Application] Application of UVLED CICS Light Source on PCB Ink

Since the development of UVLED curing light sources, its application field has been widely not only curing in glue. Now the field of ink curing has also begun to use UVLED as the main equipment of UV curing, but most ink formulas are not suitable for UVLED light sources. A small number of inks consider considering ink considerations. In the future, the direction and trend of development have begun to debug in the formula as UVLED ink, so today we will take a look at the application of UVLED light source on the PCB ink. PCB ink refers to the ink used by the printing circuit board. The basic composition is pre -cluster, active diluent, light cause, pigment and auxiliary agent. The traditional solidification method of the PCB ink is UV mercury lamp, but due to the high energy consumption of mercury lamps, the low curing efficiency and the need to replace the lamp tube regularly, most manufacturers now use UVLED light sources to curing PCB ink ink. 1. Mryhouse lights consume large power, and produce harmful gas such as ozone such as ozone, and the temperature is high, the temperature is short, the life span is short. 2. UVLED has an advantage in power saving and environmental protection. And small volume, convenient operation can also be combined with external control. 3. The figure below is the facial light source used in our tianhui in PCB board ink: In summary, there are many advantages in UVLED curing light sources. The development of UVLED curing ink has become the new direction of today's PCB ink industry. Tianhui has many years of experience The UVLED curing light source manufacturer has a forward -looking research and development of equipment for UVLED ink curing. At present, it has been put into use on the client. In the future, Tianhui will continue to work hard in the curing of ink to make more good products that make everyone satisfied.