Tianhui- one of the leading UV LED chip manufacturers and suppliers provides ODM/OEM UV led chip service.

How to Welded with Lamp Beads? Just Master These Steps

How to welded the lamp beads? Today, I will take you to learn more about the LED welding method as follows: 1. First of all, clamp the patch with the mule, and clamp the metal part of the 1 -end or the side. Plastic part of the force, otherwise it will squeeze and deform when the soldering iron is heated. There is a green one with a negative electrode. 2. Apply a small amount of tin pulp on the wires. I suggest to see the picture above, and you can add it according to your own experience. 3. Left -handed wire, right hand soldering iron, first of all, the iron head is cleaned, and then the part of the wire with tin paste is touched on the metal part of the LED section. Use the soldering iron gently. The metal is enough (be careful not to pad on the metal object, and the temperature of the welding effect is not old due to the good heat dissipation effect). After welding, use metal dumplings to help dispersing the heat, be careful of burns. 4. After welding as shown above, wipe off the excess tin pulp, and in turn, the same side is the same 234. 5. After a series of actions are completed, connect the power! Xiaobian suggested that there is nothing wrong to buy a few circuit boards to do a test of a test for yourself. Patching LED lamp beads Welding method I. Manual welding 1. It is recommended to use rebound welding under normal circumstances, only manual welding when repairing only during repair. 2. The maximum power of the electric soldering iron used by hand -welded cannot exceed 30W, the welding temperature is controlled within 300 C, and the welding time is less than 3 seconds. 3. The soldering iron welding head cannot be touched and the patch LED lamp bead colloid can be avoided to avoid damaging LED lamp beads high temperature. 4. When the pin is heated to 85 C or higher than this temperature is the patch LED lamp beads cannot be pressured, otherwise the golden line will be easily disconnected. Second, return welding 1. Reflow welding peak temperature: 260 C or lower than this temperature value (surface temperature on the lamp bead). 2. Time required for temperature rise above 210 C: 30 seconds or less than 30 seconds. 3. Back welding is generally once, and it does not exceed two times. 4. After the return welding, the LED lamp bead needs to be cooled to the room temperature before touching the surface of the LED colloidity. Zhuhai City Co., Ltd., as the creator of the green lighting source, has 16 years of patch LED R & D and production experience, adhering to the concept of perfect quality, excellence, adopt high -end raw materials in the packaging process, strict control control procedures, and strengthen trust implementation. All aspects of simulation customers use conditions for experiments, and strive to make quality at the same price level. The company's main non -standard products have accumulated rich experience in glowing, high temperature resistance, long feet, anti -decaying, high finger, and mixed colors. The main products include infrared LED, ultraviolet LED and patch LED. We share the value with our customers. The LED has no color difference to the separation of our brand. It uses different wavelength chips to make the consistency of different batches of color. When all LED companies can only do the consistency of each batch of goods, we will reduce it. Good product rate, persist. With a good quality and integrity attitude, the brand sincerely serve mid -to -high -end customers, and quickly rises to become second -tier brands in the industry. Product performance has gradually been highly recognized by well -known domestic and foreign companies. The company further explores the domestic automotive electronics market, especially in automotive instruments, automotive audio, internal indicators and car lighting markets. In the future, the company will continue to develop the blue ocean strategy, invest more in the automotive electronics field, and strive to become early to become early to become the early becoming in the automotive electronics field. Brand supplier.

How to Welded with Lamp Beads? Just Master These Steps 1

Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

recommended articles
Projects Info Center Blog
Peek into the power of light with this blog. You'll explore the magic of 340nm UV LED. The goal here is to uncover its roles in biochemical analysis. From basic concepts to real-world applications, learn all about 340nm UV LED.
UltraViolet (UV) LED chips, created by expert manufacturers, hold big promise. In this detailed guide, the focus is on the intricacies of UV LED chips, their making, and how they are evolving. The spotlight is also on the impactful role of key manufacturers in advancing this cutting-edge technology.
In the food and beverage industry, ultraviolet (UV) disinfection technology is a rapidly expanding sector. UV radiation is used to disinfect water, air, and surfaces by killing bacteria, viruses, and other pathogens to make the food healthy. This technology has grown in popularity due to its efficiency, usability, and minimal cost.
UV LED curing is a widespread technology that is utilized in numerous industries, such as the printing, coating, and adhesive manufacturing sectors. The process uses ultraviolet radiation to cure and harden a wide variety of substances, including inks, coatings, adhesives, and polymers.
Various water treatment technologies including UV water disinfection have been developed in response to the rising demand for pure drinking water. In recent years, Ultraviolet-C (UV-C) LED technology has garnered significant interest for its potential applications in potable water treatment. This technology has a number of advantages over conventional mercury-based UV lamps, including energy efficiency, lower operating costs, and a smaller environmental footprint.
In the past, there were no UV LED lights available for commercial use. However, with advancements in LED technology leading to higher power densities, UV LED lights are now becoming more prevalent in the market, replacing traditional options.
Ultraviolet (UV) disinfection/water purification technology uses UV light to kill harmful microorganisms in water. It's a natural and effective way to purify water without adding chemicals, making it a popular choice for many households and industries. The process works by exposing water to a strong UV light source, which damages the DNA of bacteria, viruses, and other pathogens, causing them to die.
UVC LED technology has gained significant attention in recent years, and it's no surprise that the market is expanding with more home appliances and consumer products adopting the technology. The COVID-19 pandemic only fueled the demand for UVC LED products as consumers and businesses seeked effective ways to disinfect their environments. UVC LEDs offer a safe, reliable, and efficient way to kill bacteria and viruses, making them a popular choice for various applications.
no data
one of the most professional UV LED suppliers in China
You can find  us here
2207F Yingxin International Building, No.66 Shihua West Road, Jida, Xiangzhou District, Zhuhai City,Guangdong, China
Customer service