The UVLED curing machine of the UVLED curing device bonded by medical equipment has been in the medical industry for many years. The current loss of medical consumables is a large part of the loss. Medical consumables mainly include oral materials, surgical equipment, diagnosis, and accessories. Using Tianhui's UV curing equipment, there is a professional solution for medical consumables. The picture shows a medical infusion hose. It uses TianhuiuVLED curing machine to curing and bonding at the cured bonding. There is no ultraviolet residue. This is many mercury lamps. The problem has improved the production efficiency of customers while reducing the adverse rate of the product, saving the cost for customers. CICF places the hose with glue bonding on the countertop of the light source of the UVLED curing machine. Pay attention to wearing protective equipment. After confirming that it is correct, open the UVLED curing machine, set the appropriate parameter, click the lights. When UVLED is irradiated, UV light needs to be from the center to the surrounding area, and confirmed that the light can indeed be illuminated to the bonding site. Light 6s (time will change due to glue characteristics and light intensity. ) Around, preliminary positioning, but in addition to the remaining glue on the component, re -light to complete solidification. Pay attention to whether there is glue overflow, if there is any timely treatment. Remarks: Temperature (T ) also has a little effect on the activity of glue. When the temperature is low, the curing time should be extended appropriately. When plastic bonding, the content of ultraviolet absorbers in plastic should be considered. The rate of light has a significant impact on the curing efficiency of glue, and it is even guide until the glue cannot be solidified. TIANHUI has obtained dual certification of national high -tech enterprises and Zhuhai high -tech enterprises. Patent UVLED light source curing system. Adopting advanced intelligent touch technology and driving solutions can make the UVLED light source system more simple and easy to use. Professional heat dissipation technology guarantees the stable and reliable equipment of the equipment. The UVLED point light sources, UVLED line light sources, UVLED face light sources, UVLED oven, UVLED tunnel furnaces have been widely used in glue adhesion in the medical industry. Welcome industry colleagues to inquire.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

1. The storage conditions of the light oil on the UVLED ink and UVLED are generally: low temperature state, cool and ventilated, or can be stored in the refrigerator. Their shelf life is generally 1 year. If the storage conditions of the above requirements are not met, it is easy to deteriorate and cause material damage. 2. When the UVLED ink or optical oil is applied, the coating should not be too thick and too thin, and it is easy to cause the material and the printing to not be well combined. 3. UVLED ink and upper optical oil cannot be mixed with ordinary ink or upper optical oil. If the material is used to convert from ordinary materials to UV materials, the material should be cleaned with the machine. And the auxiliary agent can only use the UV -specific auxiliary agent. 4. UVLED ink and upper optical oil should use professional cleaning agents such as: acetic acid, ethanol, etc., and our commonly used gasoline and kerosene can not work. 5. Avoid contact with the skin, it will cause itching, redness, pimples, peeling and other symptoms. In case of sticking to the skin, it should be cleaned with soap as soon as possible. (Note: Ethanol acetic acid can be cleaned, but they are not commonly used in life, so in emergency situations, soap is best found) 6. The attachment of UVLED ink And changes, so when a new printing is printed, it should be confirmed first. 7. The black ink in the UVLED ink has a strong ability to absorb ultraviolet rays. Therefore, the curing speed of such ink is slower. During the printing process of UV black ink, it is necessary to slow down the printing speed. The purpose is to increase the time of ultraviolet rays. Make the ink sufficiently solidify.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

From the perspective of the industry, it is not difficult to buy the LED module light source lamp belt. Just pay attention to the following issues: 1. Before buying, understand the style and brand of the lamp belt. On the one hand, you can understand the style and brand ranking of the lamp online, and provide the basis for the purchase of the purchase. On the other hand, you can also inquire with friends around you, which kind of lamp strap has better performance and more affordable price. 2. According to the renovation renderings, the LED module light source lamp belt with suitable styles. When determining the style of the lamp, be sure to determine according to the renderings of the decoration. Of course, you can also communicate with the sales staff of the light belt, so that they recommend the appropriate lamp style style. Only in this way can the decoration effect be played. 3. Understand the price of the light band. According to the LED light belt manufacturers, the price of different brands and different styles is different. When choosing to buy, be sure to figure out the price market and help the purchase of a reliable and affordable lamp zone. 4. If you dont like the style of the lamp on the market, you can also contact the LED lamp with the LED light belt manufacturer to customize. According to reports, many LED lights with manufacturers have launched customized services, trying to provide more suitable light bands for users. The advantages of the LED module light source lamp belt are very obvious: the price of the LED light belt is getting lower and lower, the consumption of electricity is very small, only about 20%of ordinary lamps, and the service life is up to 100,000 hours. Dozens of times, it also has the characteristics of low maintenance cost, short response time, no pollution, etc. At the same time, the price of the LED module light source lamp band is also getting lower and lower, so it is very welcomed by consumers. Because the LED lamp belt has the advantages of efficient, longevity, energy saving, environmental protection, etc., now it is becoming more and more popular in the market, and more and more manufacturers who naturally produce LED light bands.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

At present, there are more common patch LED lamp beads. Big iron welding: 1. The temperature requirements of the soldering iron do not exceed 300 C; 2. The welding time is less than 3 seconds; 3. The welding position should be more than 2mm from the colloid. Summit welding: 1. The temperature requirements during welding do not exceed 260 C; 2. The welding time is less than 5 seconds; 3. The positioning position of the soaked welding should be more than 2mm from the colloid. The above is an introduction to the welding method of patch LED lamp beads. Do you understand it?




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

The application of UV LED 340nm in medical testing is becoming increasingly widespread. UV LED is a high-energy ultraviolet light emitting diode with a wavelength of around 340nm, which has high energy and penetration. In the field of medical testing, UV LED 340nm is widely used in bacterial testing, blood analysis, cancer screening, and other fields. The following will provide a detailed introduction to the application of UV LED 340nm in medical testing.

Firstly, UV LED 340nm plays an important role in bacterial detection. Bacteria are the causative agents of many diseases. By detecting the presence and quantity of bacteria, doctors can quickly diagnose diseases and take corresponding treatment measures. The high-energy ultraviolet radiation of UV LED 340nm can damage the DNA structure of bacteria, thereby killing or inhibiting their growth. By exposing the sample to UV LED 340nm radiation, the presence of bacteria can be quickly and accurately detected, providing convenience for the diagnosis and treatment of diseases.

Secondly, UV LED 340nm also has important applications in blood analysis. Blood is an important indicator of human health. By analyzing various components in the blood, one can understand the health status and disease risks of the body. The high-energy ultraviolet radiation of UV LED 340nm can induce specific chemical reactions in certain substances in the blood, thereby achieving the detection and analysis of blood components. For example, by measuring indicators such as proteins, cells, and metabolites in the blood, it is possible to determine whether there are abnormalities in the blood and provide corresponding treatment.

In addition, UV LED 340nm can also be used for cancer screening. Cancer is a serious disease, and early diagnosis is crucial for treatment and recovery. The high-energy ultraviolet radiation of UV LED 340nm can induce specific fluorescence reactions in cancer cells, thereby achieving the detection and screening of cancer cells. By exposing the patient's tissue samples or body fluids to UV LED 340nm radiation, the fluorescence signal of cancer cells can be observed, thereby determining whether there is a risk of cancer.

In summary, UV LED 340nm is widely used in medical testing. It can be used for bacterial testing, blood analysis, cancer screening, and other aspects, providing doctors with fast and accurate diagnostic methods, helping to improve the early diagnosis rate and treatment effect of diseases. With the continuous progress of technology, it is believed that the application of UV LED 340nm in the field of medical testing will continue to expand and deepen.