With the increasing popularity of LED lighting products, the exchange of different LED light source module products has always been one of the topics that the industry is very concerned. With the obvious development trend of LED light source modules, traditional LED manufacturers also also Gradually innovate, the purpose is to realize the standardization of the LED light source module industry faster. In the future development of LED, the industry's focus will be concentrated in the development of the integration of the unified and standardized LED light source modules. So what is the so -called LED light source module? In fact, the LED light source module is to synthesize the light source, heat dissipation components, and drive power synthesis modules, mass production, and create standardized LED lighting products through molds. These modular systems include drivers and cables can quickly and conveniently integrate. The LED light source module is designed according to the standard lamp products, and it is also produced according to the standard. The purpose is to better and convenient for the back -end application manufacturer. Since the LED light source module already has the array structure and circuit running required by optics, it can directly save certain key materials and equipment for terminal lighting manufacturers at the back end. For example, PCB, aluminum substrates and patch for welding materials, etc. In addition, the popularization of LED light source modules is becoming more and more obvious, and consumer groups are becoming wider and wider. At the same time, it will bring a lot of higher requirements to the module product. But rest assured that LED light source modules have advantages in terms of cost -effectiveness, reliability and assembly. Therefore, the LED light source module will be more shiny in future general lighting applications. Judging from the current LED market size, my country has become a leading figure in the global LED market. Compared with some international companies that master LED key equipment materials, the advantages of my country's LED industry are currently in LED packaging and application. But if we vigorously develop the LED light source module level and continuously improve, it may be possible to occupy more resources in the entire LED market in the future. . According to the aspect of the LED light source module, some supporting technologies can be formed, such as closely integrated into optical design, integrated light source reliability technology, standardized technology, etc. Only by grasping the key point of LED light source module technology can we accelerate the development of my country's LED industry and enhance the overall competitiveness.

Author: Tianhui-Air Disinfection Author: Tianhui-UV Led manufacturers Author: Tianhui-UV water disinfection Author: Tianhui-UV LED Solution Author: Tianhui-UV Led diode Author: Tianhui-UV Led diodes manufacturers Author: Tianhui-UV Led module Author: Tianhui-UV LED Printing System Author: Tianhui-UV LED mosquito trap

What are the classifications of LED light source modules? According to the color type, it can be divided into three types: monochrome, colorful, and full -color single -point control. Monochrome is a single color module. Generally, there are red, green, yellow, white, etc. are more commonly used; colorful LED light source modules It is a module product that is transformed by seven different colors. It has more colors and more variable; compared with colorful LED light source modules is richer, it can achieve full -time color changes, not only very beautiful, only very beautiful, only very beautiful, only very beautiful. And full of dynamics, it can also be more attractive. According to the power of a single LED, it can be divided into three types: small power (less than 0.3W), medium power (0.3-0.5W), and high power (1W and above). Modules with high power are higher than small power in brightness in brightness in brightness. , And longer, it is the development trend of the entire LED lighting in the future, and it is more practical. According to sealing, it can be divided into two types: waterproof and non -waterproof. Waterproof and non -waterproof modules are mainly distinguished by the application environment. Generally, waterproof LED modules can be used for outdoor lighting and promotion. The waterproof module is mainly used in the room more. Of course, waterproof modules are higher than waterproof in price. According to the shape of the LED, the LED module is divided into: direct -inserted LED module, 食 食 食 LED module, patch LED light source module. The LED light source module requires that the voltage of the LED ranges from 2-9V, and the power also has a wide range. Which LED is used to depend on the technical requirements of this module as a product. For example, this LED module needs to output 10LM light. It is better to use two LEDs in the appearance. You can choose a 5LM LED. Combining color (LED voltage is related to color), temperature, quality and other factors, you can find a suitable product LED. Instructions for the use of LED light source modules I. At this stage, the light source of the light is mainly used in the LED three lamps, five lights, and six lamps with the input voltage of the light. The output DC12V is the power supply, so if you don't install the switch power supply when installing the luminous characters, do not put the light -emitted or LED light source module directly into the market to communicate with 220V. Otherwise, the LED light source module will burn out due. 2. In order to avoid the long -term load work of the switching power supply, the switching power supply and LED load power better is 1: 0.8, and the service life of the product will be more secure and long -lasting according to this. Third, if the module exceeds 25 groups, it should be connected separately, and then connects to the light -emitting box in parallel from high -quality copper core wires greater than 1.5 square millimeters. Properly increase the line diameter. In order to avoid short circuits, the end of the module must be cut and paste. If necessary, use a self -attack screw to fix the outdoor use of outdoor use, Brightness. LED light source module distance visual brightness requires between 3 and 6cm, the thickness of the word can be selected between 5 and 15cm. There are two types of LED light for luminous characters: Mermaid and small straw hat. Earnian light module is suitable for the glowing characters between 8-15cm height between the wall wall?. Fifth, in the process of using the light -emitting LED light source module, be sure to pay attention to the problem of voltage drop. Never do only one loop, from the first series of connecting tail. This will not only make the brightness inconsistent due to the different voltage between the first and tails, but also the problem of excessive single -circuit current burning the circuit board. The correct approach is to connect as much as possible to ensure that the voltage and current distribution is reasonable. 6. For the inside of the word cavity, if you need to use anticorrosive materials, it is recommended to use white primer to increase its reflection coefficient. The above is the classification of the LED light source module, as well as the requirements of the LED light source module and instructions!

Author: Tianhui-Air Disinfection Author: Tianhui-UV Led manufacturers Author: Tianhui-UV water disinfection Author: Tianhui-UV LED Solution Author: Tianhui-UV Led diode Author: Tianhui-UV Led diodes manufacturers Author: Tianhui-UV Led module Author: Tianhui-UV LED Printing System Author: Tianhui-UV LED mosquito trap

The quantity of framework suppliers, formulators, and OEM machine manufacturers supporting these applications extends alongside the rundown of functional UV LED utilizes. This consistent ascent empowers UV LED innovation's future in the business. Along these lines, people who haven't yet investigated its relevance for their relieving prerequisites can conclude that the second has come. This paper is expected to give an understanding of the growing UV LED market space and to offer a general prompt regarding how to match a UV LED relieving framework to the prerequisites of a given application for the two fledglings and the people who have been following or in any event, using the innovation for a long time. Application of UV LED In The Field Of Inkjet Printing In cement, covering, and UV LED Printing System, UV LED restoring gadgets are utilized for many business and modern applications. With suitable material creation, UV LED relieving frameworks have worked on their capacity to convey higher energy to the medium, prompting better throughput, process adaptability, and earth and energy-proficient choices notwithstanding those that are more customary. Due to the developing benefits, end clients are exchanging over rapidly to UV LED light relieving innovation. UV LEDs' overall frequency dissemination The ostensible pinnacle irradiances for UV LED frameworks are currently at 365, 385, 395, and 405 nm. The produced frequencies are moderately monochromatic and addressed by tight, ringer-formed conveyances. Key applications ofUV LED curingIn The Field Of Inkjet Printing The evolving climate, a rising requirement for security measures, and an interest in lightweight items with exceptionally incorporated usefulness are the essential powers and inspirations driving the sensor innovation of intelligent materials. Savvy materials help in the client's capacity to recognize, respond to, and, preferably, adjust to outer upgrades. Ongoing examinations have utilized different materials to show the requirement for UV sensors to recognize UV beams from daylight, including multifunctional ZnO-based biofilms, fluorescent polyoxometalate, viologen conductive polymer, and CNT composites, hydrated tungsten oxide nanosheets, and photochromic compounds. To act as adaptable sensors for savvy material applications, photochromic materials have extraordinary characteristics that permit them to tell clients of the presence of hazardous UV radiation in conditions when it isn't quickly hazardous, like breezy and somewhat overcast climate. Photochromic colors, for example, natural spiro compounds, reversibly change the tone from vapid to a variety when presented with UV radiation. The sub-atomic design of the color is modified by raised photoelectric energy, a cycle that might be scattered by one or the other intensity or noticeable light. The color's isomers An and B have different ingestion spectra. The formation of UV-detecting materials utilizing photochromic colors has gotten a ton of consideration in ongoing writing. Customary strategies for creating materials, for example, screen printing, coloring, and mass coloring have all demonstrated fruitful in consolidating photochromic colors into material designs. Furthermore, the utilization of photochromic colors in creative creation strategies has become more normal. While inspecting photonic relief to make a photochromic cross-connected polymer, Adlib assessed the potential outcomes of computerized inkjet UV LED Printing Systemof dissolvable based ink to deliver photochromic materials. The advantages of inkjet imprinting related to photographing relieving a fluid polyurethane acrylate system or by small-scale emulsion encapsulation were explored in different fields of material shading, for example, color printing. Supposedly, no examination has yet been finished on the coupling of advanced inkjet UV LED Printing Systemwith UV-Drove restoring in the development of an economically usable UV-detecting shrewd material utilizing photochromic color. Because of their high firmness and three-layered cross-connected structure, UV-treatable coatings put themselves aside from thermally dried covering or fastener frameworks like the water-based acrylate folios normally utilized in screen printing. The science, or the determination of oligomers and monomers in the definition, can direct the covering's adaptability, attachment, and hardness. While imprinting on adaptable materials like materials, follower ink adaptability is exceptionally essential. In contrast with dissolvable-based other options, UV-treatable inkjet inks frequently have better adherence to permeable materials. The thickness of the printed ink and the cross-connected organization can both be directed using inkjet UV LED Printing System and UV relieving. In the long run, an elevated degree of crosslinking is wanted to create great color adherence. Inks for UV inkjet printers Monomers and photo initiators, which are expected for the photochemical response started by UV light openness, are available in UV inkjet inks. When presented with UV light, the photo initiators produce revolutionaries that then trigger the monomer polymerization process. The shade scattering gives the UV ink its tone. Various added substances are required to accomplish every single quality component, including surfactants, in-can stabilizers, attachment advertisers, and so on. Warm drying versus UV restoring The UV restoring system quickly stores an inked layer that has solidified onto the substrate by utilizing UV light instead of intensity. Dissolvable dissipation happens during customary intensity and air-drying strategies, yet not during UV restoration. UV restoring likewise creates no toxins, doesn't decrease covering thickness or volume, and delivers more sturdy outcomes while utilizing less energy and waste. Where to buy your UV LED UV LED curing in the field of inkjet printing Zhuhai Tianhui Electronic Co., Ltd., one of the top UV Led manufacturers, specializes in UV LED air decontamination, UV LED water sterilization, UV LED printing and UV LED curing, UV LED diode, UV LED module, and other goods. It has a skilled Expertise and operations team to offer consumers UV LED Solution, and its goods have also won the praise of a large number of customers. With a complete production run, consistent quality and dependability, as well as affordable costs, Tianhui Electronics has been working in the UV LED package market. From short to long wavelengths, the products comprise UVA, UVB, and UVC, with full UV LED specs ranging from low to high power. We are acquainted with a variety of UV LED applications, including UV LED curing, UV medicinal, and UV sterilizing.

The technology behind LED lighting is currently undergoing a period of rapid development, and the luminous efficiency is continuing to advance. Every two years, the amount of luminous flux that can be produced by a single LED package device is increased by a factor of two. Since the 1980s, there has been a gradual increase in the promotion of the use of surface - mounted devices in the production of LEDs. When it comes to illumination, the high power SMD LED that was produced subsequently is what is utilised for automobile panel lighting, brake lights, and has even been extended to regular lighting equipment. SMD LED market status When seen from a worldwide perspective, the packaging production in Chinese Taiwan accounts for sixty percent of the world's share. The production and marketing aspects of the industry chain are steady, particularly with regard to the packaging sector, and there is a clear division of labour between the upstream, middle, and downstream businesses. When production is moved to the mainland, the cost of production will decrease, allowing it to compete better with other countries. It is anticipated that within the next five to ten years, the Yangtze River Delta, the Pearl River Delta, Fujian, and other places will become the global centres for the production of UV LED packaging. The local SMD LED market has been relatively stable recently from the point of view of the Chinese mainland market. Characteristics of the encapsulation used in SMD LEDs The phosphor and epoxy resin are first configured to make a mould for the SMD LED, which is the first step in the encapsulation process. Next, the epoxy resin and phosphor powder are combined to make a glue cake, which is then adhered to the chip. Finally, the remaining space around the chip is filled with epoxy resin to create an SMD packaged LED. Nowadays, the more typical SMD LED on the market is packaged with three LED chips, and six pins are extended, which are connected to the surface of the PCB circuit board. This LED has an external size of 50mm x 50mm. It is directly bonded to the surface of the heat sink using thermally conductive adhesive, which results in significant improvements in heat dissipation, dependability, and a reduction in the rate at which light decays. Substrates made of metal-ceramic composites with good thermal conductivity are typically what are utilised for high-power LEDs. These are the primary characteristics: (1) A high level of thermal conductivity and a low thermal resistance; (2) Compatibility of the coefficient of thermal expansion (TCE: 6.2); (3) Anti-ultraviolet; (4) Resistance Corrosion, as well as the absence of yellowing; (5) Adhere to the criteria set by ROHS; (6) Ability to withstand high temperatures. The thermal resistance of the LED encapsulation has a significant impact on the lifespan of the LED chip, particularly with regard to the LED chip that is subjected to high current. The structure of the packaging bracket determines the cost and heat dissipation performance of LED encapsulation products, and the structure of the packaging bracket is evolving in the direction of small size, thin thickness, and good heat dissipation. This is important because the cost of LED encapsulation products is directly proportional to the heat dissipation performance of the product. When packaging additional LED chips into a single SMD LED, the issue of heat dissipation is something that must be taken into consideration. The ultra-low thermal resistance offered by high-power SMD LEDs whose substrates are made of high thermal conductivity metal-ceramic composites is the most significant benefit offered by these lights. Because of its compact size and relatively thin profile, the ultra-low thermal resistance and high-power LED chip package is better suited for use in applications that have limited available space. Numerous applications can significantly profit from utilising this functionality. A Contrast Between SMD LEDs and DIP LEDs The surface-mount device (SMD) LED is affixed to the top of the circuit board, making it appropriate for surface-mount technology (SMT) processing as well as reflow soldering. LEDs with surface-mount diodes (SMD) offer improvements in terms of brightness, viewing angle, flatness, dependability, and consistency. Its excellent vibration resistance, low solder joint fault rate, and superior high-frequency characteristics are some of its advantages when compared to those of other packaged devices. The in-line LED utilises potting as its packaging material. The first step in the potting process is to inject liquid epoxy resin into the cavity of the LED mould, followed by the insertion of the pressure-welded LED bracket. After that, the assembly is placed in an oven to cure the epoxy resin, and finally, the LED is formed after being removed from the mould cavity. Its strong market share can be attributed to both the straightforward manufacturing method and the competitive pricing. Because of the rapid expansion of economies all over the world, there is currently an urgent need to find a solution to the worldwide problem of insufficient energy supplies. The consumption of light is approximately twenty percent of the overall electricity consumption. One of the most essential things that can be done to save energy is to lower the amount of power that is used for lighting. The transition away from conventional light sources is being sped up by the use of energy-efficient LED lamps, which serve as a replacement for conventional incandescent lighting. Where to buy SED LED from? Zhuhai Tianhui Electronic Co., Ltd.,one of the uv led manufacturers, specializes in UV LED air purification, UV LED water sterilization, UV LED printing and curing, uv leddiode, uv led module, and other goods. It has a skilled Research and innovation and sales staff to offer consumers UV LED Solutions, and its goods have also won the praise of a large number of customers. With a complete production run, consistent quality and dependability, as well as affordable costs, Tianhui Electronics has already been working in the UV LED package market. From short to long wavelengths, the goods include UVA, UVB, and UVC, with full UV LED specs ranging from low to high power.

Are you looking for a robust and flexible solution to disinfect your space? Look no further than mobile UV units. These innovative robots move from room to room, eliminating harmful germs and bacteria on surfaces. Mobile UV led diodes are becoming popular as more industries outside of healthcare catch on to the benefits of UV disinfection. But with prices varying considerably, from $3,000 to $20,000, it can be challenging to know which product is the best fit for you. In this article, we'll explore how mobile UV led module work and break down the factors that affect their cost, helping you make an informed decision Budgeting for UV Disinfection: What to Expect in Costs When budgeting for UV disinfection, it's important to understand that costs can vary greatly depending on the type of UV product you choose and the size of the area you need to disinfect. One of the most popular options for UV disinfection is mobile UV units, which can range in price from $3,000 to $20,000 or more, depending on the size and capabilities of the unit. Aspects that can affect the cost of a mobile UV unit include the coverage area, the length of the UV LEd solution, and the number of sensors or cameras included. Another option for UV disinfection is stationary UV units, typically used for larger spaces such as hospitals or commercial buildings. These units can range in price from $5,000 to $40,000 or more, depending on the size and capabilities of the unit. Aspects that can affect the cost of a stationary UV unit include the coverage area, the type of UV led solution used, and any additional features such as remote monitoring or automatic shut-off. It is also important to consider the ongoing cost of operating and maintaining a UV disinfection system. The cost of replacing UV lamps, filters, and other parts will vary depending on your chosen product. Additionally, you should consider the labor cost if you plan to hire a professional to install or maintain the system. It is vital to consider that while the initial cost of UV disinfection may seem high, it can provide significant long-term benefits in terms of improved health and safety for building occupants, reduced absenteeism, and lower overall cleaning costs. Before deciding which UV disinfection product to purchase, carefully consider your specific needs and budget and compare the prices and benefits of different options. The Price of Protection: UV Disinfection System Cost Breakdown When it comes to UV disinfection, the cost of the system can vary depending on several factors. Here is a breakdown of what you can expect to pay for different types of UV disinfection systems and the factors that affect the cost: Mobile UV units These robots move from room to room, disinfecting surfaces. Prices for portable UV units can range from $3,000 to $20,000. The following factors can affect their costs: ·The coverage area ·Product Warranty ·The length of the UV-led solution ·The number of sensors ·Cameras ·Other safety measures ·The brand of the product Stationary UV units They are typically used for larger spaces such as hospitals or commercial buildings. Prices for stationary UV units can range from $5,000 to $50,000 or more. The following factors can affect their costs: ·The coverage area ·The type of UV lamp used ·Additional features ·Remote monitoring capabilities ·Automatic shut-off ·Sensors ·Brand ·Product Warranty Installation costs If you plan to hire a professional to install your UV disinfection system, this can add additional costs to your budget. The cost of installation will vary depending on the type and size of the system, as well as the complexity of the installation. Ongoing costs It's also important to consider the ongoing cost of operating and maintaining a UV disinfection system. The cost of replacing a UV led solution, filters, and other parts will vary depending on your chosen product. Additionally, you should consider the labor cost if you plan to hire a professional to install or maintain the system. Generally speaking, while the initial cost of UV disinfection may seem high, it can provide significant long-term advantages in terms of improved health and safety for building occupants, reduced absenteeism, and lower overall cleaning costs. Before deciding which UV disinfection product to purchase, carefully consider your specific needs and budget and compare the prices and benefits of different options. Keeping Your Environment Safe: The Cost of UV Disinfection Keeping your environment safe and clean is essential for the health and wellbeing of those who occupy it. One effective way to accomplish this is through UV disinfection technology. However, before investing in a UV led diode system, it's important to understand its costs. The cost of a UV disinfection system can vary depending on several factors. The most significant factor is the type of UV disinfection system you choose. There are two main kinds of UV disinfection systems: UV-C and UV-V. UV-C systems are commonly used in hospitals and other healthcare facilities. They emit UV-C light, a powerful germicide that kills many microorganisms. The cost of UV-C systems can range from a few thousand dollars for a small unit to several hundred thousand dollars for a large system. UV-V systems are similar to UV-C systems but emit UV-V light, which is less powerful than UV-C but still effective in killing microorganisms. The cost of UV-V systems is usually lower than UV-C systems, ranging from a few hundred dollars for a small unit to several thousand dollars for a larger system. Furthermore, the disinfected area size is another factor that affects the cost of a UV disinfection system. Larger areas will require more powerful and expensive systems, whereas smaller areas can be disinfected with less powerful and less costly systems. Finally, it's also important to consider the cost of installation and maintenance when budgeting for a UV disinfection system. Installation costs can vary depending on the complexity of the system and the location where it will be installed. Similarly, maintenance costs will vary depending on the system type and the required frequency. UV Disinfection on a Budget: How Much Does it Cost? UV disinfection is an effective way to keep your space clean and safe, but the cost of the technology can be a concern. However, it is possible to find UV disinfection solutions within a budget. The cost of a UV led module system varies depending on several elements, including the type of system, the size of the disinfected space, and the installation and maintenance complexity. Mobile UV units, Frobots that move room-to-room disinfecting surfaces, can be a cost-effective option. These units can range in price from $3,000 to $20,000, depending on the size and capabilities of the unit. They are suitable for small to medium-sized spaces and can be a great option for businesses, schools, and other facilities on a budget. Another cost-effective option is UV-V systems, which emit UV-V light, which is less powerful than UV-C but still effective in killing microorganisms. These systems are often smaller and less expensive than UV-C systems, ranging from a few hundred dollars to several thousand dollars. Installing and maintaining a UV disinfection system will add to the price tag. The total price of installation can change based on factors like the system's sophistication and the site's accessibility. The price tag for upkeep will vary based on the complexity and regularity of the system you have. Depending on your method, you may pay less or more for this. Battling Germs: The Cost of UV Disinfection Systems Battling germs and bacteria is essential for maintaining a healthy and safe environment. One effective way to accomplish this is through UV disinfection systems. However, the cost of these systems can be a concern. The cost of a UV disinfection system changes depending on several elements, including the sort of system, the size of the disinfected space, and the installation and maintenance complexity. When determining how much money to allocate toward a UV disinfection system, you should also consider how complicated the installation would be. The final price tag for an installation depends on several factors, including the system being put in and its final destination. For instance, installing a UV led module system in a large commercial building will require more resources and will be more complex than installing a small unit in a residential home. UV disinfection systems are a cost-effective way to keep your space clean and safe, but it's important to understand their costs. By considering the type of system, the size of the area to be disinfected, the type of lamp used, and the complexity of installation and maintenance, you can make a knowledgeable judgment that will best serve your needs and budget. Cost-Effective UV Disinfection: How Much to Expect When it comes to UV disinfection, cost-effectiveness is an important consideration. Several factors can affect the cost of a UV led diode system, including the type of system, the size of the disinfected space, and the installation and maintenance complexity. One cost-effective option for UV disinfection is the use of UV-A systems. These systems emit UV-A light, which is less powerful than UV-C and UV-V but still effective in killing microorganisms. In addition to being more cost-effective, they also last longer and use less energy. Most UV-A systems cost between a few hundred and a few thousand dollars, making them more compact and affordable than their UV-C and UV-V counterparts. Another cost-effective option is using UV-C lamps with low-pressure mercury vapor. They have a lower cost than UV-C lamps with high-pressure mercury vapor and are also more energy-efficient. Furthermore, another cost-saving factor to consider is the type of lamp used in the UV disinfection system. UV-C lights, for instance, are more powerful and efficient in killing germs and bacteria, but they also have a shorter lifespan and require frequent replacement, which can add to the maintenance cost. On the other hand, UV-A lights have a longer lifespan but may need more time to disinfect a space. The cost-saving benefits of UV disinfection systems Yes, the UV disinfection system's costs might seem a lot at once. But when you start factoring in the regular disinfection costs you bear using conventional methods - these prices will seem much smaller. Preventing ailments through the use of UV-C disinfection has the potential to provide substantial savings. It is because they can stop the infection before it can happen. For example, mobile units don't need any human help to move. The autonomous nature of the unit means that it can clean more quickly and with fewer employees, opening the door to more business. Furthermore, the robot's ability to go around obstacles and reach close to walls ensures that every surface receives the most thorough cleaning. Finally, it is clear that UV disinfection systems are not costly at all; in fact, they save you more capital in the long run. Final Thoughts The cost of a UV air disinfection system will depend on several aspects, such as the size of the system, the number of lamps required, the type of water treatment needed, and the specific application. A small UV disinfection system for a residential home can cost anywhere from $500 to $2,000. Similarly, a larger commercial or industrial system can cost anywhere from $5,000 to $50,000 or more, depending on the system's size and sophistication. It's important to note that, in addition to the initial cost of the UV disinfection system, ongoing costs are also associated with operating and maintaining the system. These can include replacement lamps, electrical power, and routine maintenance costs. It is recommended to consult with a professional UV led diode system provider or a water treatment expert to get a more accurate estimate of the cost based on the specific needs. Because they don't require chemicals and have low maintenance costs, UV led solution systems can be more cost-effective in the long term than other water treatment technologies. Last but not least, they don't create any waste products that would be expensive to treat or dispose of.