3528 Ziguang LED Parameter Introduction Product Name: 3528 Ziguang LED Product Category: 3528 Voltage: 3.1-3.3 V appearance size is 3.5*2.8*1.9mm Lighting angle: 120 degrees working current: 20 mA Working temperature: -40 to 85°C Storage temperature: -40 to 100°C3528 Purple LED is packed in rolls, each volume of 2000 3528 purple light LED product features: The light emitting angle is wide, reaching 120 degrees, suitable and patch machine stickers, back welding technology, patch lamps for rolling packaging, each volume, each volume -(2000) High coloring index, small light decay, high temperature resistant silicone packaging, can be used to return welding welding and light consistency, low loss. Full color, white, warm white, cold white, red, green, blue, yellow, yellow, pink, purple light and other color light can be made. 3528 Purple light LED packaging form: white PLCC shell, colorless transparent resin packaging; product characteristics: large light angle, good outlet effect; 120 degrees; welding method: adapt to all SMT patch welding; 3528 purple light LED application Industry: lighting lighting; outdoor and outdoor display (traffic lights, display board); backlight display (LCD, switch, billboard); automotive electronics (car instrumentation, keys, audio backlight); replace traditional fluorescent light lighting; traffic indicator lights; traffic indicator lights; , Signal lights and so on. 3528 Ziguang LED remarks: A) Material welding does not exceed 2 times. b) Please do not press the LED light when welding. c) Do not twist the line board when the temperature does not return to the normal temperature after welding. 2. 3528 purple light LED handmade welding specification: During hand -welded, the temperature of the soldering iron is not higher than 300 C, and the welding time of each welding foot does not exceed 3 seconds, 3528 purple light LED storage specifications: 1. Please do not open before you are prepared to use the LED Anti -static bag. 2. The LED should be stored below 30 C before opening, and the humidity is below 60%. The longest storage period is 1 year. 3. After opening the packaging, the LED needs to be stored at the conditions below 30 C/40%humidity, and it must be used within 7 days. 4. If the LED exceeds the requirements of the 3rd point, the LED must be baked before it can be used. The baking conditions are: 60±5 , 12 hours.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

At present, the luminous body of the UVLED curing machine on the market is ultraviolet UVLED lamp beads. The UVLED curing light is composed of one or more Ingan quantum traps in a thin GAN sandwich structure, and the source area formed is. By changing the relative proportion of Inn-GAN in the Ingan quantum trap, the launch wavelength can be changed from purple light to other light. Algan can be used to make the cover layer and quantum trap layer in UVLED by changing the ALN ratio, but the efficiency and maturity of these devices are poor. If there is a source quantum trap layer is GAN, which is relative to Ingan or Algan alloy, the spectral range of the device emitted is 350 370nm. When a short electronic pulse at the blue inflection diode pump, ultraviolet radiation is generated. Aluminum -containing nitrogen, especially Algan and Algainn can make short -wavelength devices, obtain a series of wavelength UVLED. Most of the domestic manufacturers still use traditional ultraviolet mercury lamps to work. However, due to the characteristics of UVLED long life and no radiation, its application is also becoming more widely widely used. Zhuhai Tianhui Electronic Co., LTD. is a company engaged in LEDUV irradiation equipment. After years of accumulation, it has a very rich LEDUV irradiation point light source and wire surface light source equipment types. It can also customize various equipment according to customer needs according to customer needs.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

Directly inserted LED lamp beads in the process of welding, please strictly abide by the following requirements: 1. Be sure to wear anti -static gloves, anti -static wrists, etc. during actual production. Only lead. Because the humidity of the human body on the workbench is 60%-90%, the static electricity of the human body will damage the crystal layer of the LED lamp beads. After a period of time, the LED lamp beads will show failure and dead lamps. 2. Welding temperature is 260 C, 3 seconds. Too high temperature and too long will burn bad chips. In order to better protect the LED lamp beads, LED lamp beads and PC boards should be kept at a distance of more than 2mm to make the welding heat dispel. 3. The normal operating current of the direct -inserted LED lamp bead is 20mA, and the micro fluctuations of the voltage will cause a large fluctuation of the current. Therefore, during the design of the circuit design, different current -limiting resistors should be paid according to the voltage and deployment of LED lamp beads to ensure that the LED lamp beads are in the best working state. When the current is too large, the LED lamp beads will shorten the life, the current is too small, and the required brightness requirements cannot be met. Our company will split the LED lamp beads when batch supply, that is, the LED lamp bead parameters in the same pack of products are consistent, ensuring the consistency of the actual product. At present, the more common LED lamp beads welding method: 1. Single iron welding: the tip of the tip of the soldering iron does not exceed 300 C, the welding time does not exceed 3 seconds, and the welding position is at least 2mm from the colloid. 2. Summit welding: The maximum temperature of soaking welding is 260 C, the welding time does not exceed 5 seconds, and the soaked welding position is at least 2mm from the colloid. Directly inserted LED lamp bead welding curve pins method: 1. Must be 2mm from the collagen to bend the bracket. 2. The formation of the bracket needs to ensure the pins and spacing consistent with the line board. 3. The formation of the bracket must be done with a fixture or by a professionals. 4. The formation of the bracket must be completed before welding.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

LED lamp beads have many strengths such as energy conservation and environmental protection. Following the reduction of LED lamps quotation, these years, LED lamps have slowly entered the vast home lighting and lighting market. And more and more wide. So, what are these infrared LED lamp beads on the lamps? First of all, in addition to the primary use of infrared LED lamp beads on the scene lighting shopping mall, including: construction decoration, interior decoration, tourist attractions and other lamps, it can also be used on the primary construction, big streets, business centers, famous monuments, bridges, communities, yards , Lawn, home, leisure and entertainment, decoration lighting fixtures, and commercial lighting lamps that are integrated and advertising. Secondly, the infrared LED lamp beads are first used on the car lamps. Car shopping malls are infrared LED lamp beads using fast -developed lamp shopping malls. They are mainly used in the instrument panel, air conditioning, audio and other indicators and internal reading lights. Wait. Again, infrared LED lamp beads also have many use in the backlight shopping mall. For example, infrared LED lamp beads have been used in many fields such as mobile phones, computers, handheld electronic products, cars, aircraft dashboards and other fields. In the end, infrared LED lamp beads also have many use in traffic lamp malls. It is precisely because infrared LED lamp beads red, yellow, and green LED have high brightness, long life, and power saving. The LED light source has the characteristics of seismic resistance, weather resistance, good sealing, low heat radiation, small volume, and easy to carry. It can be widely used in special operations such as explosion -proof, field operations, mines, military operations, etc. In the process of the curing process of deep ultraviolet LED lamp beads, the oxygen resistance aggregation has always been confused by everyone: when the light is curing in the air, the oxygen blocking effect often causes the bottom layer of the coating. Oxygen blocking can cause the surface layer of the coating to present a lot of oxidative structures such as hydroxyl, cymbal, and peroxy groups, and then affects the long -term stability of the coating, and may even affect the hardness, gloss and resistance of the paint film after curing. Function. Why? The basic state of the material is single -line, but the stability of O2 is three -line state. Therefore, it consumes free radicals with the aggregation response competition of free radicals. Because the vast majority of optical curing technology is performed in the air environment, and the primary application is data such as coatings and inks with a large appearance/volume ratio, O2 has a free radical polymerization response to the free radical polymerization of optical solid data. Concentration. Especially when the thickness of the coating film is thin, the concentration of oxygen in the oily organic system is generally less than or equal to 2 10-3 mol/L. Not only does the dissolved oxygen molecule in the formula obstruct the aggregation, in the process of light, follow the oxygen in the solidification system. The consumption of the molecule, the oxygen in the appearance of the coating air can also be scattered into the coating agile, continuously obstructing the aggregation. The oxygen concentration of the system Chinese dissolved in China is very low, which is easier to consume. Regarding the closing system, the process of primary activity free radicals consuming oxygen is basically equivalent to the aggregate induction period. Relatively speaking, oxygen from the outside world to the inside of the coating is the primary cause of obstruction of aggregation. Oxygen blocking also occurs simply in the superficial layer or all of the thin coating, because in these areas, the oxygen molecules in the environment are more simply. Back to the previous step to print this page




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

Last time, I shared with you [UVLED CICS maintenance tips]. It is said that the basic abnormal phenomenon and solution that UVLED curing machines will appear during daily use. The maintenance skills of the curing machine can allow you to prevent problems that may occur in advance before buying a UVLED curing machine and save your worries! The structure of the UVLED curing machine plays a key role in the entire device, not only the difference between the beauty and the unsightlyness. Tianhui's UVLED curing machine is different from other manufacturers, because Tianhui has always designed and produced UVLED curing machines as precision instrument levels, and strives for details. Even a screw Is reliable and brought about whether the structure is beautiful, etc. The structure of the UVLED curing machine determines the cooling level and service life of this machine on Chengdu. Unreasonable structure or obvious design defects will cause UVLED curing machines to appear abnormal or extinguishing lights from time to time during daily use. So how can we get a more reasonable structure? When the structure of the UVLED curing machine is designed, it is necessary to consider the problems of heat dissipation, optics, and circuit wiring according to the needs of the customer: 1> heat dissipation, the [UVLED curing machine maintenance tips] mentioned last time There are detailed introductions and instructions in it. You can take a closer look, or consult TIANHUI directly; 2> Optical issues, Tianhui sees many UVLED curing machine manufacturers when designing. Optics is one of the most important core parameters of the UVLED curing machine. Everything else is considering this. Whether the optical light brought by structural design will be an important indicator of the UVLED curing machine assessment. In the original, Tianhui understands the customer's needs. After the structure, optical lens, etc., after meeting the customer's needs, it obtains a higher light source radiation degree and reasonable light source uniformity. This is important. This is very important. 3> Circuit problems, each machine of Tianhui has a special routing area. This is because Tianhui does not want to be an abnormal or safety hazard in the UVLED curing machine that is assembled because of structure or personnel differentiation. The principle of tianhui wiring is the shortest line distance, optimal line method, and the best line structure! The above is the [UVLED curing machine maintenance tips] structure that brings you this issue. Later, Tianhui will bring you other tips for daily maintenance and maintenance. Welcome everyone to refer to reference! For more maintenance tips, you can also contact Tianhui in the following ways. Tianhui will definitely know everything! Tianhui Zhuhai Headquarters Contact: Manager Li Movement: 13602666094 Contact: Manager Liu: 18811880519tianhui East China Office (guest from East China, North China, please contact) Contact: 13048834002 1536107848




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap