7020LED lamp bead manufacturer-5050 Phantom LED lamp beads Which Buy Technology Co., Ltd. has a batch of reliable technical personnel and high-quality manufacturers. The modern management system and mature production equipment are the production and operation of the company's 3030LED lamp beads. And the service provides a reliable guarantee. With "safety, stability, innovation" as the product design principle, technology is committed to the research and development and production of high -level 3030LED lamp bead products in LEDs. , Car turning light, Bluetooth audio, digital clock, traffic signal light. 7020LED lamp bead manufacturer-5050 fantasy LED lamp beads which buy. Technology Co., Ltd. is located, with excellent geographical location and convenient transportation. It is a reliable manufacturer of 3030LED lamp beads. The company focuses on the production and sales of various high -quality LED products and related supporting facilities. It has mature production equipment, exquisite craftsmanship, standardized scientific management, and quality products to be recognized by the market. It has continuously developed and grows. It has become the LED product industry. Li's emerging enterprise. 7020 lamp bead is a medium -power patch ultra -high -bright diode, which is a ultra -thin series with a radiator. 7020 lamp beads are currently widely used products in the lighting market. 7020LED lamp beads Features: 1. High brightness: the displayed color is bright, the reducing ability is good, and the light color effect is good. 2. Low attenuation: Adopt imported materials, plus the packaging process technology, the product can be controlled within two -tenthths of thousands of thousands of inch. 3. Show finger high: Puxian: Ra> 70, Gao Xian: RA> 80. 4. Long life: adopt import packaging technology, good heat dissipation effect, the average product life can be more than 50,000 hours or more. It is widely used in LED lamp tube, LED ball bubbles, LED panel lights, LED ceiling lamps, LED street lights, LED car lights, mine lights, stage lights, flashlights, lights, light lights and other lighting fixtures, outdoor billboards, electronic display screens, electronic display screens, electronic display screens, electronic display screens , Traffic signal lights, signs, car taillights, LED luminous modules, LED backlight, LED lighting lighting, LED soft/hard light strips, etc., are the choice of replacing traditional lighting sources. Technology Co., Ltd., as a high -tech -based optoelectronics enterprise with research and development and technology types, in addition to the automatic solid crystal machine, welding machine, white light fluorescent powder automatic pink machine with a technical level, automatic lighting and strip machine, it is more condensed. A group of high -quality management personnel and sales elites have continuously upgraded and optimized and improved in terms of product characteristics and detail control. They laid a solid foundation for high -quality and high -quality products and services. 7020LED lamp bead manufacturer-5050 fantasy LED lamp beads which buy. Nowadays, the magic lamp bar has been integrated into our lives, and you can see the shiny fantasy light bar on the street, which means that our current life is becoming more and more abundant. It is also explained that the application of the slide lamp belt products is no longer limited to whether it is needed. It is more about the traditional products with the reform of reform, so that other products attach the light effect while reflecting the original value. Is the charm of lights. The new 5050 Phantom LED lamp bead, that is, LED chips and light control IC integrated lamp beads. LEDs are usually R, G, B three colors. At present, the market is mainly based on the Hengliu 6ma Phantom, 12-13MA Fantasy Lottery. The main specifications are mainly encapsulated by 5050 lamp beads. Phantom lamp beads are applied to: LED Phantom Light Belt, LED Phantom Light Strip, LED Flexible Neon Tube, LED Hard Light Strip, LED S -shaped light belt, toys, instruments, digital products and other areas use. RGBW four -in -one lamp beads have 3 chips in the RGB light, namely red chip, green chip and blue chip. The cost is much higher than ordinary lamp beads. This is the difference between RGB lamps and ordinary lamp beads. Which is the best? Select Technology Co., Ltd., established in December 2014. The company is an LED business that integrates R & D, production, sales, and serving. The company is located on the third floor of the Fifth Floor of Guangming Valley, No. 11 Petroleum Magang Road, Gongming Town, Guangming New District, Guangdong Province, covering an area of 5,000 square meters, and there are more than 200 employees. The company has a mature LED packaging technology, which can provide customers with highlights, high brightness, low light aging, and good consistency LED products. The advantage of the new 7020LED lamp bead: 1. High brightness: narrow spectrum, high color rendering, showing realistic color, excellent color reproduction ability, good light color consistency. 2. Low attenuation: The company adopts imported materials, plus the packaging process, and the attenuation of the product can be controlled within two thousandth. 3. Show finger high: Puxian: Ra> 70, Gao Xian: RA> 80. 4. Long life: The materials used in the product, good heat dissipation effect, product life can be more than 50,000 hours. 5. Environmental protection: high -power LED street lights do not contain pollution elements such as lead, mercury, etc., and have no pollution to the environment. 7020LED lamp beads to find? Select Technology Co., Ltd. At present, the company's main products are divided into: LED direct insertion series, LED SMD patch series, LED high -power series, LED food mermaid series, LED photography lamp special series, LED visual light source series, LED light strip LED light belt series, LED Infrared and LED ultraviolet series, consumer electronics series, medical and other mainstream products. Widely used in LED photography and studio lamps, machine vision and intelligent machine equipment, lighting and lighting, car decoration and instructions, advertising light box logos, traffic indicators, advertising modules, display screens and backlight display, LED sterilization curing and medical products. We all provide a 3030LED lamp bead with high price and excellent price for the majority of demand groups, and continue to launch new energy -saving products to meet the needs of the market. Technology enthusiastically welcomes people of insight across the country to the company to guide and communicate with you to join hands with you to create a better tomorrow! Company address: Welcome to the new and old customers to come and discuss cooperation. We have 7020LED lamp bead manufacturers, 5050 fantasy LED lamp beads, which buy 5050 fantasy LED lamp beads

Author: Tianhui-Air Disinfection Author: Tianhui-UV Led manufacturers Author: Tianhui-UV water disinfection Author: Tianhui-UV LED Solution Author: Tianhui-UV Led diode Author: Tianhui-UV Led diodes manufacturers Author: Tianhui-UV Led module Author: Tianhui-UV LED Printing System Author: Tianhui-UV LED mosquito trap

With the continuous improvement of LED manufacturing technology, LED lighting efficiency has continued to improve and prices have continued to decrease. The LED light source module brand has gradually developed from previous single bulb -type packaging applications to various forms such as inverted, patch, and integration. Through special and scientific optical design, more than high light flux and various light angles are obtained, and LEDs are also widely used in various lighting. Among them, LEDs are widely used in the field of lighting as industrial goals, including high -end lighting such as museums and business. The modular R & D, design, and production of light sources have become the key to achieving goals. The advantage of the LED light source module brand is that it can be used in any form of application to large -limit optical design, heat dissipation design, shape, size design, and interface standardization design. Convenience and function of replacement modules based. The color rendering index (the ability to reproduce the real color of the light source) is one of the three important indicators to measure the quality of the white light source. It is also an important standard for measuring whether the LED light source is healthy. The status in various product indicators in the field of lighting is particularly obvious. For example, in foreign countries, due to the requirements of lighting habits and health, the general demand color temperature is more than 6000K, the cold light light source with a color rendering index of 80 or more (about 3000K), the warm white light source with a color rendering index above 90 or more, so Improving the color rendering of LED light sources is also a key common technology that must be solved in the field of semi -conductor lighting. The technical difficulty of high -gravity integrated LED light source module brand is that it is necessary to meet the mixed color uniformity, the consistency of color temperature, the consistency of the color temperature, the consistency of the color temperature, the high -heat resistance, etc. on a module with less than 0.0007 square meters It is required that its technical characteristics are that the light source module integrates optical design, circuit design, and heat dissipation design. It is a typical new generation of LED light source technology of collecting light, electricity, and heat solutions. We call this technology "high color rendering index LED light source module technology". The products formed by this technology will be widely used in the application of lamps such as incandescent lamps, energy -saving lamps, and downlights, and become the core light source of indoor lighting products.

Author: Tianhui-Air Disinfection Author: Tianhui-UV Led manufacturers Author: Tianhui-UV water disinfection Author: Tianhui-UV LED Solution Author: Tianhui-UV Led diode Author: Tianhui-UV Led diodes manufacturers Author: Tianhui-UV Led module Author: Tianhui-UV LED Printing System Author: Tianhui-UV LED mosquito trap

1. LED light source module brand lamp band wiring method (power connection method) is usually like this. Because its general voltage is DC 12V, it is necessary to use the switching power supply to supply power. The size of the power supply is determined according to the power and connection length of the LED module light source light band. 2. Of course, the installation of the LED module light source lamp belt is more focused on whether the waterproof performance and installation are firm. Because the LED module light source lamp belt usually to withstand the wind and rain. If it is fixed with 3M glue, it will cause 3M adhesive to reduce the time of the LED module light source lamp band. Therefore, the card slot fixation is often used during installation. It needs to be cut and connected. It only needs to prepare another waterproof glue to consolidate the waterproof effect of the connection point. Then use a special fixed card to fix the eyes with an electric hammer, and use a plastic bloating tube to add screws to fix the card. This can be firm in the wind and rainy weather in the wind and rain. 3. If you want to use a large power supply to realize the changing effect of the LED light source module brand lamp belt, the help of the controller needs. During the wiring, the lamp belt is generally common anode, that is, one on the lamp belt is12V, and the others are all three negative RGB negative poles, which means that the control distance of each controller is different. Generally speaking, the control distance of the simple controller is 10-15m, the control distance of the remote controller is 15-20m, and the longer can be controlled to 30m distance. If the connection distance of the LED module light source lamp band is long, and the controller cannot control such a long lamp belt, we need to use the power amplifier to separate. Here we need to science with you. The generally used 3528 series LED module light source light belt is generally 20m, the 5050 series LED module light source light belt, the length connection distance is 15m. If this connection distance is exceeded, then the light belt is easy to heat and hot. During the use process, it will affect the service life of the LED module light source lamp belt. 4. The wiring method of monochrome LED light source module brand is to distinguish positive and negative electrodes. Generally, we need to prepare for the welding power plug, and then insert it directly to the position of the light belt power supply. If the group light source lamp belt is controlled by a power supply, you can buy a large switching power supply as a total power supply, and then connect all the LED module light source lamp bands in parallel. This can achieve the effect of centralized control, but it is inconvenient that it cannot achieve the lighting effect and switch control of a single LED module light source light belt.

Author: Tianhui-Air Disinfection Author: Tianhui-UV Led manufacturers Author: Tianhui-UV water disinfection Author: Tianhui-UV LED Solution Author: Tianhui-UV Led diode Author: Tianhui-UV Led diodes manufacturers Author: Tianhui-UV Led module Author: Tianhui-UV LED Printing System Author: Tianhui-UV LED mosquito trap

Xiaobian today will share the common sense of application common sense and electrostatic dry goods common sense of direct insertion 5mm straw hat LED lamp beads. I. Welding: 1. Single iron welding: The tip temperature of the soldering iron does not exceed 300 C, the welding time does not exceed 3S, and the welding position is at least 2mm from the colloid. 2. Soaking welding: The maximum temperature for soaking welding cannot exceed 260 C, the welding time does not exceed 5s, and the soaked welding position is at least 2mm from the colloid. Second, direct insert LED lamp bead pin forming method: 1. Scholar bending LED lamp beads must be at least 2mm from the colloid. 2. The formation of the bracket must be done with a fixture or by a professionals. 3. The formation of the bracket must be completed before welding. 4. The formation of the bracket needs to ensure the pins and distances consistent with the line board. 3. Install the LED lamp bead installation: 1. Pay attention to the arrangement of the 5mm straw hat LED lamp beads to prevent the polarity from being wrong. Dont exceed the limits of its specified regulations 2. Dont install LED lamp beads when the pins deformation. 3. When installation in the hole, calculate the size and tolerance of the pore distance of the face and line board to avoid excessive pressure on the bracket. 4. Before the welding temperature drops, do not cause the LED lamp beads to be vibrated or external forces. Fourth, direct lamp beads cleaning: When using chemical items to insert LED lamp beads to clean the colloid, it must be paid special attention, because some chemicals have damage to the surface of the colloid and cause fading , Time does not exceed 3 minutes at normal temperature. The work and storage temperature of the 5mm straw hat LED lamp beads: 1. The general operating temperature of the 5mm straw hat LED lamp beads is -25 -85 . 2. The storage temperature of the 5mm straw hat LED lamp beads is -40 -1 Infrared emitting tube 00 . Static electricity can cause LED lamp beads to fail, so it is necessary to prevent static electricity from damage to straw hat LED lamp beads during use. 3. Directly insert 5mm straw hat LED lamp bead detection and assembly. The operator must wear static uniforms and anti -static gloves. 4. Welding equipment and testing equipment, working tables, storage racks, etc. must be effective. 5. The infrared receiving head uses ion fan to eliminate the static electricity generated by the LED lamp beads during storage and assembly during storage and assembly. 6. The ingredient box of the 5mm straw hat LED lamp bead is used to use the anti -static ingredient box, and the packaging bag uses a static bag. The straw hat LED lamp beads that are damaged by static electricity are directly inserted by 5mm, and there will be reverse leakage. For those who are light, it will cause a decrease in brightness. In severe cases, the phenomenon of dead lamps will appear. The voltage value becomes smaller, and the straw hat LED lamp beads cannot be glowing when the low -current driver. The above is the direct -inserted 5mm straw hat LED lamps dried goods shared by Xiaobian. If you want to know more LED lamp bead information, please continue to pay attention to us. If you have technical problems, you can contact our official online customer service staff. Provide technical support solutions!

Author: Tianhui-Air Disinfection Author: Tianhui-UV Led manufacturers Author: Tianhui-UV water disinfection Author: Tianhui-UV LED Solution Author: Tianhui-UV Led diode Author: Tianhui-UV Led diodes manufacturers Author: Tianhui-UV Led module Author: Tianhui-UV LED Printing System Author: Tianhui-UV LED mosquito trap

At the South China printing exhibition ended at the Guangzhou Convention and Exhibition Center this year, it is easy for us to find that many printing devices are equipped with UVLED curing light sources. The application of UV LED curing in printing is a process of solvent without ink. Volatile organic substances can reduce environmental pollution. With the implementation of the WTO's prohibition of mercury, more and more printing equipment will change the previous mercury lamp to UVLED. Our company has done UVLED curing equipment for more than ten years. It has deep technical precipitation and a group of high -tech talents to provide customers with efficient and reliable UVLED curing devices.

Author: Tianhui-Air Disinfection Author: Tianhui-UV Led manufacturers Author: Tianhui-UV water disinfection Author: Tianhui-UV LED Solution Author: Tianhui-UV Led diode Author: Tianhui-UV Led diodes manufacturers Author: Tianhui-UV Led module Author: Tianhui-UV LED Printing System Author: Tianhui-UV LED mosquito trap