The Basic Process of Installing the LED Light Source Module Lamp Belt

1. LED light source module brand lamp band wiring method (power connection method) is usually like this. Because its general voltage is DC 12V, it is necessary to use the switching power supply to supply power. The size of the power supply is determined according to the power and connection length of the LED module light source light band. 2. Of course, the installation of the LED module light source lamp belt is more focused on whether the waterproof performance and installation are firm. Because the LED module light source lamp belt usually to withstand the wind and rain. If it is fixed with 3M glue, it will cause 3M adhesive to reduce the time of the LED module light source lamp band. Therefore, the card slot fixation is often used during installation. It needs to be cut and connected. It only needs to prepare another waterproof glue to consolidate the waterproof effect of the connection point. Then use a special fixed card to fix the eyes with an electric hammer, and use a plastic bloating tube to add screws to fix the card. This can be firm in the wind and rainy weather in the wind and rain. 3. If you want to use a large power supply to realize the changing effect of the LED light source module brand lamp belt, the help of the controller needs. During the wiring, the lamp belt is generally common anode, that is, one on the lamp belt is12V, and the others are all three negative RGB negative poles, which means that the control distance of each controller is different. Generally speaking, the control distance of the simple controller is 10-15m, the control distance of the remote controller is 15-20m, and the longer can be controlled to 30m distance. If the connection distance of the LED module light source lamp band is long, and the controller cannot control such a long lamp belt, we need to use the power amplifier to separate. Here we need to science with you. The generally used 3528 series LED module light source light belt is generally 20m, the 5050 series LED module light source light belt, the length connection distance is 15m. If this connection distance is exceeded, then the light belt is easy to heat and hot. During the use process, it will affect the service life of the LED module light source lamp belt. 4. The wiring method of monochrome LED light source module brand is to distinguish positive and negative electrodes. Generally, we need to prepare for the welding power plug, and then insert it directly to the position of the light belt power supply. If the group light source lamp belt is controlled by a power supply, you can buy a large switching power supply as a total power supply, and then connect all the LED module light source lamp bands in parallel. This can achieve the effect of centralized control, but it is inconvenient that it cannot achieve the lighting effect and switch control of a single LED module light source light belt.