1. Storage moisture-proof is very important for the normal use of LED lamp beads. In any case, LED lamp beads should be stored in a dry and ventilated environment. The storage temperature is -40 100 . It is better to use LED lamp beads within 3 months under its original packaging conditions, so as not to rust the bracket. When the packaging bag of LED lamp beads is opened, it should be used as soon as possible. At this time, the storage temperature is 5 28 , and the relative humidity is 60%as follows. 2. Cleaning can not use unknown chemical liquid to wash LED lamp beads, which may damage the appearance of LED lamp beads and even cause collagen cracking. If necessary, soak the LED lamp beads at the alcohol at room temperature. Time should Stimulate within one minute. 3. Do not take shape during welding or after welding. Remember that any behavior of squeezing resin may damage the golden line inside the LED lamp bead. 4. When welding is welded with LED lamp beads, do not apply any external pressure to the lamp body. Otherwise, it may break inside the LED lamp beads, which will affect its internal golden wire connection and cause quality problems to cause quality problems. The colloid must not be immersed in the welding. When welding, the welding point must have at least 2 sisters from the lower edge of the colloid. If the LED lamp beads are uniformly launched with a soldering iron, do not weld the two pins of the uniform LED lamp beads at the same time. What else must be noticed is that the welding temperature or improper time control may cause LED lamp bead lenses deformation or the internal opening of the core of the lights and cause the dead lamp. 5. It is recommended to use the essentials in the process of use, whether it is single or multiple in use, the driver current of each LED lamp bead is recommended to use the IF range. The instant pulse will destroy the internal fixed connection of the LED lamp bead, so the circuit must be carefully designed, so that when the online road is closed, the LED lamp beads will not be impacted by overvoltage (overcurrent) shock. LED lamp beads require the consistency of light and brightness and color when used in multiple uses. Under normal conditions, the consistency of the color of the LED lamp beads and the brightness of the brightness. 6. The protective static electrostatic static electrostatic can cause LED lamp beads to effectively lose effect, so during the use process, it is necessary to avoid the damage to LED lamp beads. 1. LED lamp bead detection and assembly must wear static uniforms and anti -static gloves. 2. Welding equipment and testing equipment, tables, storage racks, etc. must be used for use. Three imported LED lamp beads, using ionic fan to eliminate LED lamp beads during storage and assembly during storage and assembly. Fourth, the ingredient box containing LED lamp beads uses anti -static ingredients, and the packaging bag uses a static bag. The phenomenon of LED lamp beads damaged by electrostatic damage will appear: 1. Inverse leakage, light will cause a reduction in brightness, and in severe cases, the phenomenon of death will occur. Second, the voltage value becomes smaller. LED lamp beads can't shine during low -current driving.
Author: Tianhui-Air Disinfection
Author: Tianhui-UV Led manufacturers
Author: Tianhui-UV water disinfection
Author: Tianhui-UV LED Solution
Author: Tianhui-UV Led diode
Author: Tianhui-UV Led diodes manufacturers
Author: Tianhui-UV Led module
Author: Tianhui-UV LED Printing System
Author: Tianhui-UV LED mosquito trap