ODM/OEM services of various air and water disinfection modules and overall UV LED(UVA.UVB.UVC.UVV) solution provider.

[UVLED Application] UVLED Curing Technology Has These Applications in These Aspects

What is UVLED curing technology? Where is UVLED curing application? Today UVLED technology is widely used in industry, and people often use ultraviolet lights in life to illuminate sterilization and disinfection. The spectral range of the general UVLED curing machine is 200nm-420nm, each with different uses. Among them, the UVA -band UVLED light source is often used in industrial UVLED curing, centered on 365nm; UV curing is a photochemical reaction, and the UV curing process is: adding photoretically (or optical agent) to the resin of a special formula, which is absorbed by ultraviolet rays. (UV) After the high -intensity ultraviolet light in the optical curing equipment, active free radicals or ion bases are generated, which causes aggregation, cross -linking and branching reactions, so that resin (UV coatings, ink, adhesives, etc.) within a few seconds (within a few seconds (within a few seconds (UV paint, ink, adhesive, etc. No) transform from liquid to solid state. Application field of microelectronics industry-UV optical curing applications Mobile component assembly (camera lens, handset, microphone, shell, LCD module, touch screen coating, etc.) 2 3. DVD/digital camera (lens, lens bonding, circuit board reinforcement) 4 Motor and component assembly (wires, coils are fixed, the end of the coil is fixed, PTC/NTC component bonding, protecting the transformer magnetic core) 5 Semiconductor chips (anti -humid protection coating, wafer mask, wafers of wafers, exposure to ultraviolet tape, crystal polishing inspection) 6 Sensor production (gas sensor, photoelectric sensor, optical fiber sensor, photoelectric encoder, etc.) PCB industry LED UV optical curing application 1 Components (capacitors, inductances, various plug -ins, screws, chips, etc.) fixation 2 Wide -proof irrigation and core circuits and chip protection, protection of antioxidant coating 3 Circuit board preservation (angle) coating 4 Fixed line, flying line, coil fixing 5 The peak welding pores mask medical device LED UV optical curing application UV glue adhesion makes the economic automation assembly of medical devices easier. Advanced LED UV light source system, which can curing ultraviolet glue without solvents for a few seconds, as well as the point -to -adal system, a effective and economical method for forming a consistent and repetitive bonding process for the fitting process of the medical device. The optimization and control of the UV light source is very important for manufacturing reliable medical devices. There are many advantages to use ultraviolet curing glue, such as lower energy needs, saving time and location of solidification, increasing productivity, and easier to automate. UV glue is generally used to bond and seal medical devices. These medical devices require very high quality and best reliability. UV glue solidification is typical in medical equipment. For example, it needs to be bonded 1. Different materials (or different mechanical characteristics) 2. The material is not thick enough, and the welding method cannot be used 3. Pre -production sub -parts. Anesthesia mask 2. 3 Guard tube 4 Intravenous infusion tube 5 6 7. Arterial positioning 8. 9 10. Blood oxygen meter 11. Listener 12. Detective, monitoring, and image equipment 13. Biological chip 14. Adhesive PVC, thermal plastic (polycarbonate and ABS) optical industry Optical component assembly (lens group, prism, optical engine assembly) 2 Image instrument assembly (microscopic, endoscope, infrared instrument, night vision instrument, probe, etc.) LED UV optical curing application 1 Specific device (wave division replica WDM, array grating waveguide AWG, light separator Splitter, optical isolationer isolator, optocoupler couplor, etc.), various glass packaging structure bonding or sealing, fixed fixed component fixed components Wait. 2. There are source devices (same axis device TOSA/ROSA/BOSA, VCSEL, laser counter, etc.), especially FTTX low -cost small -ized small -hymmatic packaging structure 3. Fiber optical cable (outer coating, mark, bonding, optical fiber gyroscope) scientific research and institute -st-LED UV optical curing application 1. High molecular chemistry (nano -coating, optical solid resin, optical agent, single, UV ink, etc.) 2 Medical polymer materials (medical plastics, ducts), microorganisms 3. Photic chemistry (optical catalysis, light excitation, photosynthesis, etc.) 4 Semiconductor (light acceleration, cutting, UV tape, etc.)

[UVLED Application] UVLED Curing Technology Has These Applications in These Aspects 1

Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

GET IN TOUCH WITH Us
recommended articles
Projects Info Center Blog
3528 Infrared Light Beads Are Mainly Used in the Beauty and Physical Therapy Industry
3528 Infrared Light Beads Are Mainly Used in the Beauty and Physical Therapy Industry
The mask beauty instrument is also quite hot in the past two years. There are dozens of lamp beads, and there are thousands of. The advantage is that it can be used directly on the face, and the eye protection structure can also be used. It can also be used for you to swipe and swipe your mobile phone. The disadvantage is that there are some masks, no composite light mode. For example, red, orange and blue are three separate lights, and then the power is relatively low. One is because there are more charging types, and the other is because the large row lights are exposed to 15-20cm interval, and the mask is directly attached to the face on the face. There is no energy loss caused by distance in the middle, so it doesnt need to be very high. The mask on the market ranges from tens of yuan to tens of thousands of yuan, which has a certain relationship with the number, functional model and brand positioning of their lamp beads. 3528 Infrared light beads are mainly used in the beauty and physical therapy industry, including photon rejuvenation instruments, RF radio frequency beauty instruments, hot compress cold therapy instruments, beauty eye meters, red and blue light therapy instruments, large row lamps, phototherapy masks, whitening space compartment, red light, red light, red light, red light, red light, red light, red light, red light Infrared therapy belts, red light infrared therapy insoles, red light infrared therapy mattresses, red light infrared therapy yoga mats, red light infrared neck rivers, red light infrared knees, etc. Zhuhai manufacturers specialize in the production of 3528 infrared light patch lamp beads. New and old customers who need it can come to inquire or contact our official customer service staff. Author: Tianhui-Air Disinfection Author: Tianhui-UV Led manufacturers Author: Tianhui-UV water disinfection Author: Tianhui-UV LED Solution Author: Tianhui-UV Led diode Author: Tianhui-UV Led diodes manufacturers Author: Tianhui-UV Led module Author: Tianhui-UV LED Printing System Author: Tianhui-UV LED mosquito trap
[Failure] Common Faults and Treatment Methods of UVLED Curing Equipment
[Failure] Common Faults and Treatment Methods of UVLED Curing Equipment
The UVLED curing device has been used in many industries. Here we use the device of Zhuhai Zhuhai Tianhua Electronic Co., as an example to analyze the most common faults and solutions of these devices in daily life. 1. Put the alarm. In order to ensure that the work is normal, the UVLED curing equipment will detect the sensor inside the light source when booting. If it is not detected, check whether the connected cable is well exposed. If there is no problem, replace the sensor inside the light source. Over. 2. The temperature of the light source is abnormally elevated. Due to the huge heat of the light source, the two ways of heat dissipation and water cooling with fans and water cooling are generally used. If it is a fan cooling, check whether each fan is operating normally. You need to check whether the sink inside the light source is blocked. 3. The irradiation effect is not satisfactory. First, use the inspection distance whether the irradiation distance is normal, whether the various UVLED lights of the light source can light up, and whether there is an abnormal phenomenon of light emitting. Of course, some faults, such as unable to drive the machine, the touch screen does not respond, etc. These require the manufacturer's professional and technical personnel to solve. Author: Tianhui-Air Disinfection Author: Tianhui-UV Led manufacturers Author: Tianhui-UV water disinfection Author: Tianhui-UV LED Solution Author: Tianhui-UV Led diode Author: Tianhui-UV Led diodes manufacturers Author: Tianhui-UV Led module Author: Tianhui-UV LED Printing System Author: Tianhui-UV LED mosquito trap
no data
one of the most professional UV LED suppliers in China
Contact Us

+86-0756-6986060

my@thuvled.com

 +86 13018495990

my@thuvled.com

+86-0756-86743190


You can find  us here
No 2207B, Vanke Yingxin Building, No.66 Shihua West Road, Xiangzhou District, Zhuhai, Guangdong, China. 
Copyright © 2022 Zhuhai Tianhui Electronic Co., Ltd. -www.tianhui-led.com |Sitemap
chat online