loading

Tianhui- one of the leading UV LED chip manufacturers and suppliers provides ODM/OEM UV led chip service.

[Driver] UVLED Driver Method Introduction

When designing UVLED drivers, the appropriate driver method should be selected according to the requirements of power size, application occasion, driving performance, and economy. If the driving source performance does not match UVLED expected. This article summarizes several commonly used driving methods. UVLED constant voltage driver UVLED constant voltage source is defined as the output voltage is constant when the allowable load is constant, and it will not change with the change of the load (output current). In fact, the voltage output of constant voltage sources still has a certain ripple. It can be seen from the UVLED Voldemort characteristics that UVLED work in a non -linear area. The tiny voltage changes will cause a large current of UVLED. , High accuracy to the drive source. Figure 1 shows the local I-V curve chart of a UVLED. Figure 1 UVLED driver UVLED constant current source is characterized by the constant output current, which does not change due to changes in the load (output voltage). The constant current driver is generally divided into linear constant current and switching constant current. The switching constant current is widely used in high -power UVLED surface sources and wire light sources due to high efficiency and good stability. Figure 2 shows the basic frame diagram of a constant current driving solution. Figure 2 When designing the UVLED driver scheme, regardless of the use of constant voltage or constant current driver, in order to improve the reliability of the system, various protection measures are needed, such as overload protection, over temperature protection, etc.

[Driver] UVLED Driver Method Introduction 1

Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

GET IN TOUCH WITH Us
recommended articles
Projects Info Center Blog
In the food and beverage industry, ultraviolet (UV) disinfection technology is a rapidly expanding sector. UV radiation is used to disinfect water, air, and surfaces by killing bacteria, viruses, and other pathogens to make the food healthy. This technology has grown in popularity due to its efficiency, usability, and minimal cost.
The rapid expansion of the electronics industry has necessitated the development of new and innovative technologies to propel the industry forward. The application of UV LED solutions is one of the emerging technologies in the electronics industry. Due to their unique characteristics, such as long lifespan, energy efficiency, and compact size, these solutions have been extensively adopted in the industry as a suitable alternative to conventional lighting sources.
UV LED curing is a technique that employs ultraviolet light to cure or harden substances. This procedure involves exposing the material to UV LED diodes emitting UV light. When UV light strikes a substance, it initiates a chemical reaction that causes the substance to harden or resolve. UV LED diodes emanate UV-A, UV-B, and UV-C light, which correspond to the wavelengths required to initiate the curing process.
Throughout the years, ultraviolet (UV) light as a disinfectant has gained popularity. UV LED has been used as a UV LED solution that is capable of killing a variety of microorganisms, including bacteria, viruses, and mold. It is also known as UV LED Disinfection process.
As summer approaches, so does the pesky problem of mosquitoes. These tiny insects can ruin a peaceful outdoor evening, leaving us with itchy bites and disease risk. Fortunately, there's a solution in the form of UV LED mosquito traps. These devices use the power of ultraviolet light to attract mosquitoes and other flying insects better.
Are you aware of the latest findings on the transmission rate of the new coronavirus? A recent study has uncovered a shocking discovery- the air transmission rate of the virus may be a staggering 1,000 times that of the contact surface! This means the virus may spread faster and farther than we previously thought. Keep reading to learn more about this groundbreaking research and what it means for our fight against the pandemic.
UV LED printing system is a cutting-edge technology that has revolutionized the printing industry by offering faster printing speeds, improved print quality, and increased energy efficiency. However, like any technology, it has its own pros and cons.
Are you looking for a robust and flexible solution to disinfect your space? Look no further than mobile UV units. These innovative robots move from room to room, eliminating harmful germs and bacteria on surfaces. Mobile UV led diodes are becoming popular as more industries outside of healthcare catch on to the benefits of UV disinfection.
UV LED, also known as Ultraviolet Light Emitting Diodes, is a solid-state device that produces light as soon as you pass electrical currents in a circuit. These currents pass from the positive side to the negative side of a current.
UV LED Curing utilizes UV light to change adhesives, coatings, and inks into fixed-in-place solids via polymerization. As technology is evolving, an immense rise is noticed in the adoption of UV LED Curing. It’s mainly because of the cost, performance, and sustainability benefits it brings.
no data
one of the most professional UV LED suppliers in China
Contact Us

+86-0756-6986060

my@thuvled.com   

+86 13018495990      

my@thuvled.com

+86-760-86743190


You can find  us here
2207F Yingxin International Building, No.66 Shihua West Road, Jida, Xiangzhou District, Zhuhai City,Guangdong, China
Copyright ©  珠海是天辉电子有限公司 www.tianhui-led.com |Sitemap
Customer service
detect