The price of LED light source modules has been developed in the near future, and LEDs have been widely recognized as green and environmentally friendly cleaning light sources. LED light sources have long service life, energy saving and power saving, simple and convenient application, and low use costs. Therefore. As early as 2008, the world's annual home lighting seat shipments were about 50 billion yuan. The technology of LED light sources has become increasingly mature, and the light flow of each tile has increased rapidly, prompting it to reduce the price by year by year. The large market and continuous stable growth demand for LED green lamps will be the super tsunami market in the integrated circuit industry after VCD, DVD, mobile phones, and MP3! The superior performance of high energy saving, long life, and environmental protection of LED lamps is generally recognized. 1. LED high energy -saving: DC driver, ultra -low power consumption (single tube 0.03 1W) Electric light power conversion is close to 100, the same lighting effect is more than 80%more energy -saving than traditional light sources. 2. LED long life: LED light source is called longevity light. Solid cold light sources, epoxy resin packaging, and no loose parts in the lamp body. There are no shortcomings such as filament lighting, heat sinking, and fast light. More than more. 3. LED Protective Environmental Protection: LED is a green light source, and environmental protection benefits are better. There are no ultraviolet and infrared rays in the spectrum, low calories and free flash, no radiation, and waste can be recycled. There is no pollution without mercury, cold light sources, which can be touched safely. It belongs to a typical green lighting source. The work characteristics of the LED light source module are very low in VF voltage of LED light sources. Generally, it is 2.75 3.8V. Therefore, the output voltage of the LED drive IC is VFXN or VFX1, and the IF keeps constant flow at 15 1,400ma. The LED light source used by LED lamps has two types: small power (IF is 15 20mA) and high -power (IF greater than 200mA). Little power LED is mostly used as LED solar lights, decorative lights, and grille lamps. High -power LED is used for family lighting, spotlights, bottom lights, wall lamps, street lights, tunnel lights, car work lights, etc. The power LED light source is a low -voltage and large current -driven device. Its luminous strength is determined by the current flowing through the LED. The current will cause the LED light attenuation, and the current is too small will affect the luminous strength of the LED. Therefore, the driver of LED needs to provide a constant current power supply to ensure the safety of high -power LEDs, and at the same time achieve the ideal lighting intensity. In the field of LED lighting, in order to reflect the characteristics of LED light energy saving and long life, it is important to correctly choose the LED driver IC. Without a good driver IC match, the advantages of LED lighting cannot be reflected. LED -side light source LED injection molding module LED light strip LED waterproof irrigation glue module Hongyan cabin three -one cabin LED light source module requirements for low -voltage driving chips should be met with the nominal input voltage range of the driving chip, DC 8 40V, to cover wider application needs. Ability to resist pressure is greater than 45V. When the input is AC 12V or 24V, the simple bridge rectifier output voltage will fluctuate with the grid voltage, especially when the voltage is high, the output DC voltage will be high. If the driving IC does not have a wide input voltage range, it will often be penetrated when the power grid voltage is rising, thereby burning the LED light source. 2. The nominal output current of the driving chip requires greater than 1.2 1.5A. As a LED light source for lighting, the nominal current of the 1W power LED light source is 350mA, and the nominal working current of the LED light source of 3W power is 700mA. LED light sources with high power requires a larger current, so the driver IC selected by LED lighting fixtures must have sufficient current output. When designing products, the driver IC work must be used to work at 70-90%of the best working area of 70-90%of the full load output. Drive ICs using full load output current are not dissipated in the small space of the lamps, which can easily lead to fatigue and early failure of the lamp. 3. The output current of the driving chip must be kept constant, so that the LED can shine stably without flashing. The same batch of driving chips is used under the same conditions, and its output current should be as consistent as possible, that is, the discreteness must be small, so that it can ensure effectiveness and order when producing on a large number of automated production lines. For a certain discrete chip with a certain disclosure of the output current, it is necessary to select the selection in front of the factory or put it into the production line, adjust the resistance value of the current setting resistance on the PCB board, so that the LED lamps -the constant current drive board produced by the PCB board The light and brightness of the light source is consistent to maintain the consistency of the end product.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

The LED integrated light source module is divided into two parts, one is a variety of LED screens specifically for outdoor, mainly used for display and backlight; the other is specifically used for LED lighting classes. Here we mainly talk about LED lighting modules. The light source modules used for LED lighting are divided into two parts: DC module and AC module. DC module is Direct Current English abbreviation, AC module is to exchange Alternating Current English abbreviation. Different modules are different from the lamps. The DC modules are divided into constant current modules and constant voltage modules. They need to be applied to the lamps together with the driver. The AC module is different. Municipal Electric Application on Lantern. The constant stream module, that is, the module board current is constant, the voltage can be adjusted appropriately. The constant voltage module is the fixed voltage of the module board, and the current can be adjusted at will. At present, 12V, 24V, and 48V are more common. The AC module already has its own power supply system, which can be connected directly to the municipal electricity. Different modules are applied to different lamps. The constant stream module is mostly used on fixed and separately used lamps; constant pressure modules are mostly used for combinations, infinite stitching lamps; AC modules can use various lamps, focusing on Cost consideration. The ACLED integrated light source module is directly connected to the city electricity. Many users are worried about safety and do not dare to use it. In fact, as long as the structure is processed, the high -voltage part is protected by lens or colloid. With the improvement of technology, this aspect can be well avoided; and because the DC module has undergone drive, the low -voltage power is out, so the safety performance is relatively strong. If there is an increase, the lamp body will change.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

First, no matter what color is positive and negative is fixed. The positive and negative level of the patch LED: Take a serious look at the front of the patch LED. There is a angle in a square or a rectangle. There is a angle of the angle, and the other side is the negative electrode. The positive and negative poles of LED lamp beads: Take a serious look at the front of the LED lamp beads. At both ends of the LED lamp beads, there is a small angle at the end of the LED lamp bead, and the end of the angle is positive and the other end is the negative electrode. LED straw hat lamps are distinguished by the positive and negative electrodes of LED straw hat: The new LED has not been cut, the long foot is positive, the other end is the negative electrode, each manufacturer will be different. If it is packaged by the patch 2512 Or one of the colors is the negative electrode, the bottom is expressed by the triangle, the big head is positive, the small head is the negative electrode, and the large package is positive and negative. Second, you can also use the multimeter Ohm watch. For dial -style multimeter, adjust to“Om X1”When the diode is glowing, the red watch is connected to the positive end of SMDLED, and the black watch is connected to the negative end of SMDLED. Third, because LED opening limits is about 1.5-1.8V. It is possible that the voltage provided by the digital multimeter cannot start it. So look at the mark. The patch emitting dilate (SMDLED) has a negative pole with green dots and is relatively positive. LED energy -saving light positive and negative pole recognition method: The most commonly used method is the multimeter detection method. When using a multimeter to detect the light -emitting diode, you must use it“R×L0K”files. The pipe pressure of the miserable diode is about 3V, and the universal watch is located in“R×Locke”And when the following resistance is blocked. The battery in the table is only 1.5V. Below the pipe pressure drop. Regardless of the positive and reverse access, the light emitting diode cannot be turned on, and it cannot be detected.“R×1”During the file table, 9V (or 15V) high -pressure batteries are connected, which is higher than the pressure drop, so it can be used to detect the light -emitting diode. During the test, the two tablets are connected to the two leads of the light -emitting diodes. The positive pole is connected) to the positive pole;. Then connect the two tablets and the glow diodes. At this time, it is reverse access. If the acupuncture is turned or not moved, the shining diodes have been damaged whether they turn to the head or reverse. Determine the straw hat LED positive and negative pole: inside the LED, the pins connected to the bracket are negative electrodes, and the pins of small bracket links are the positive pole judgment 5050 patch LED positive pole: the entire 5050 patch LED is square, in the four right corners There is a corner with a small scarce angle, which is the place of the small circle. The other right corners do not have a small angle. The end of the small lack of angle is the negative electrode, and the other end is the positive pole. Zhuhai TIANHUI Optoelectronics Technology Co., Ltd. is the development of LED light -emitting diode series of product development, patch LED production processing, sales and service -oriented private enterprises. Products are widely used around computer, communication products, electronic and electric toys, household appliances and lighting fixtures, automotive electronics, medical equipment and many other production areas.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

With the continuous popularization of UVLED curing machines, more and more customers have begun to pay attention to the maintenance of UVLED curing machines. No matter where you buy the UVLED curing machine, it costs money. Whether there is too much money or less money, I hope that the UVLED curing machine has been in a stable state. No one wants to buy the UVLED curing machine. Or that small problem. Next, Tianhui provides you with some commonly used maintenance tips for your reference! (Here, Tianhui's UVLED curing machine is used as an anatomical object, and the specific UVLED curing machine model will also consult your UVLED curing machine manufacturer or agent.) If you accidentally cause the UVLED curing machine to work abnormally. There are several common ways to cool down the UVLED curing machine: First, natural heat dissipation, that is, it does not need to be used by the external auxiliary heat dissipation device. Heat exchange, such as our LEDUV dot light source LX-D40; the second is the air-cooled heat dissipation, the heat in the UVLED curing machine is taken away through the strong convection generated by the fan, and the wind-cooling heat dissipation UVLED curing machine usually has heat dissipation wings. The setting of the air inlet and outlet; the third is water cooling heat dissipation, which takes away the heat in the UVLED curing machine through liquid water that is greater than the heat capacity. After that, let's talk about how to ensure the stable work of UVLED solidification functions. 1> UVLED curing machine with natural heat dissipation, conditional suggestions are recommended to fix the treatment of aluminum alloy. At the same time, aluminum alloys can also play a role in assisting heat dissipation through contact with UVLED curing machines; 2> Cold and water -cooled water -cooling The cooling method has problems with the inlet and outlets, so during the use process, it is necessary Clean the ventilation outlet. 3> The UVLED curing machine of water cooling and heat dissipation needs to replace liquid water regularly. The main purpose is to ensure that the thermal transmission pipes and the heat exchange grooves in the UVLED curing machine are not blocked, affecting the efficiency of heat exchange efficiency. The above is the [UVLED curing machine maintenance tips] brought to you in this issue. The later Tianhui will bring you other tips for daily maintenance and maintenance. Here There are some precautions for UV tablet printers to use UVLED lights, please refer to reference! For more maintenance tips, you can also contact Tianhui in the following ways. Tianhui will definitely know everything! Tianhui Zhuhai Headquarters Contact: Manager Li Movement: 13602666094 Contact: Manager Liu: 18811880519tianhui East China Office (guest from East China, North China, please contact) Contact: 13048834002 1536107848




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

Faced with the spread of the new type of virus, the hospital's popular rib clinics face huge challenges with surge in traffic, high pre -examination and triage pressure, and high -risk challenges in medical staff. Enterprises provide a safe office environment, and some technology companies respond quickly to launch smart disinfection robots. These disinfection robots can identify items in the environment for independent obstacles; equipped with disinfection management software, automatically calculate the disinfection time based on the space area, and perform 360 on the disinfection target independently°Disinfection without dead ends, quantitative management of disinfection process; intelligent operation of robots throughout the process, separation of human -computer, and ensuring safety of personnel. Specializing in the production of LED patch lamp beads. After resumption, UV ultraviolet LED demand also increases, because LED has the advantages of miniaturization, low consumption power, long life and other advantages. It has received great attention on the use of ultraviolet rays. UV LED generally refers to LEDs below 400nm in the center of light, but sometimes when the glowing wave is greater than 380nm, it is called near ultraviolet LED, and it is called deep ultraviolet LED when it is shorter than 300nm. Due to the high sterilization effect of short -wavelength light, ultraviolet LEDs are commonly used in the fields of biomedical, anti -counterfeiting identification, purification (water, air, etc.), computer data storage and military. With a number of national patents, the main products are purple light LED, infrared LED lamp beads, ultraviolet LED lamp beads, color LED lamp beads, etc. The product has good stability, colorless difference, high temperature resistance, and high power. With 16 years of experience in LED patch, if you need to learn more, you can consult our customer service, and we will serve you wholeheartedly!




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap