UVLED industry insiders know that during the use of UVLED curing machines, it will generate heat. This part of the heat is derived from the UVLED luminous mechanism. It needs heat dissipation treatment. If the cumulative temperature causes the temperature to be too high, the UVLED curing machine can be easily burned out, and dead lamps and other phenomena appear. Many manufacturers know this, but in order to save trouble, they all inform customers through the instructions or verbally that they need to open the fan or water -cooler machine for cooling. However, in the actual production process, it is difficult to avoid the operator's forgetting to turn on the water -cooled machine because of negligence. Once it occurs, the UVLED curing machine can easily damage. TIANHUI, who has worked for more than ten years in the UVLED industry, pays great attention to this detail. On the UVLED curing machine, a state signal of a water -cooled machine is connected to the UVLED curing machine. When the water cooling machine is abnormal or not turned on, the UVLED curing machine cannot light up to light up And alarm, this effectively avoids the serious consequences caused by the UVLED curing machine without timely heat dissipation. In addition to heat dissipation, there are many aspects that need attention to the details of the UVLED curing machine. Because the UVLED curing machine is a product that integrates electrical control systems, heat dissipation systems, and optical systems, it needs to pay attention to each detail to achieve better products. UVLED curing machine manufacturers, as UVLED curing machine manufacturers, Tianhui has always insisted on thinking about what customers want to do and do customers need. This is Tianhui's corporate philosophy. For more than a decade, Tianhui has been trying to provide customers with high -quality products and services. From the UVLED curing machine design, production, pre -sale and after -sales service, Tianhui has always adhered to the quality of the first. Therefore, tianhui can pay attention to more details of the UVLED curing machine, and provide customers with better and more suitable products.

Author: Tianhui-Air Disinfection Author: Tianhui-UV Led manufacturers Author: Tianhui-UV water disinfection Author: Tianhui-UV LED Solution Author: Tianhui-UV Led diode Author: Tianhui-UV Led diodes manufacturers Author: Tianhui-UV Led module Author: Tianhui-UV LED Printing System Author: Tianhui-UV LED mosquito trap

UV curing machines have also become UV curing machines. At present, UV curing machines mainly include mercury lamps, halogen lamps, new UVLED lights, etc. The main difference is that the luminous body is different and the principle of light emitting is different. For example, mercury lamps are mercury vapor to generate light energy under high voltage after power -powered, while UVLED is directly powered on the diode. Their spectrals are also different. The wavelengths from ultraviolet curing machines such as mercury lamps and halogen lamps are relatively abundant, while UVLED's wavelengths are relatively single. At present Welcome. What are the advantages of UVLED -type ultraviolet curing machines? Specific analysis has the following aspects of lamp-type UV curing machine Tianhuiled UV curing machine life. The life of the service life can be affected by the number of opens and closes of 25,000-30000 hours. The life of the service life is not affected by the number of opening and closing times a month. You need to change the light bulbs during the life period of the light bulb. There is no need to change the spectrum. There is an unavoidable infrared light wave length. There is no obvious warm luminous light luminous uniformity. It is difficult to control it. It can be arbitrarily discharged according to the needs. It is easy to control the uniformity and radiation intensity. Others need to warm up for more than 10 minutes. Heavy metal is green and environmentally friendly with a toxic material that is toxic for the human body. It is huge without harmful substances and requires additional ventilation pipelines to small. It can be placed at will according to the current use of the currently used lamp solidification equipment. Normal use conditions can be used. The next month needs to be replaced with a light bulb, and the traditional lamp equipment is about 10kW's monthly electric energy consumption of 12,000 yuan, and the electricity cost consumed for a year is 144,000 yuan. And LED UV consumes more than 2,000 yuan per month, electricity costs that pay less than 30,000 yuan a year, and save the cost of a device one year from the previous year. If you are also using ultraviolet curing machines and encounter a bottleneck of high power consumption and low energy, you may wish to contact Tianhui! If you are using a tube -type ultraviolet curing machine and encounters the problem of high frequency of consumables, you may wish to contact Tianhui! If you are looking for efficient, energy -saving, and environmentally friendly ultraviolet curing machines, then you should contact Tianhui!

Author: Tianhui-Air Disinfection Author: Tianhui-UV Led manufacturers Author: Tianhui-UV water disinfection Author: Tianhui-UV LED Solution Author: Tianhui-UV Led diode Author: Tianhui-UV Led diodes manufacturers Author: Tianhui-UV Led module Author: Tianhui-UV LED Printing System Author: Tianhui-UV LED mosquito trap

There are a lot of glue on acoustic equipment, especially the speaker industry, which basically rely on UV glue to bond. And require low temperature operations, so that UV curing to choose more suitable equipment is very important. And UVLED can just solve this problem. It can be said that UVLED optical curing machine is a new product of energy -saving and environmentally friendly products in the small speaker industry. At present, the mainstream speakers and speaker manufacturers on the market are using Tianhui's UVLED light source. Tianhui's UVLED light source equipment is so trusted by customers. The products provided by Tianhui to customers can bring real benefits to customers. If you It is also in the speaker industry and is doing similar production processes. You may wish to contact Tianhui, and there will be a lot of gains! The characteristics and advantages are as follows: 1. The thermal radiation is small, and the irradiation machine uses the luminous parts UVLED, which is emitted without infrared light, so the surface temperature of the exposure product is quite low, which can meet the low temperature operations. 2. Reduce the cost of consumables. UVLED's usage time can generally reach 20,000 hours, and the traditional LAMP method is needed to replace the lamp for about 1,000 hours. UVLED can reduce the cost of equipment consumables for you, increase the equipment utilization rate. 3. Energy -saving and environmental protection, UVLED power consumption is low, no light tube is required to preheat when used, and instantly reaches 100%high power. It is a safer and more environmentally friendly choice to replace the traditional light source. 4. Small volume design, the volume of the UVLED controller is about 1/8 of the volume of the volume of the traditional LAMP method, making the installation of the device easier. 5. Unique heat dissipation technology, scientifically quickly discharge chip heat, improve power output stability, extend the service life of UVLED. 6. Equipment can be applied to different stations, and according to the actual situation, it is suitable for various substrate materials. Today's acoustic equipment is basically UVLED, which can meet the requirements, effectively improve efficiency and reduce costs, and also play an environmental protection role.

Author: Tianhui-Air Disinfection Author: Tianhui-UV Led manufacturers Author: Tianhui-UV water disinfection Author: Tianhui-UV LED Solution Author: Tianhui-UV Led diode Author: Tianhui-UV Led diodes manufacturers Author: Tianhui-UV Led module Author: Tianhui-UV LED Printing System Author: Tianhui-UV LED mosquito trap

(In the field of LED lamp beads, there are 13 industry experience.) It has technical precipitation and high -quality products are more guaranteed. The LED lamp beads produced by Technology Co., Ltd. use regular squares. The following is the production of LED lamp beads for technology Co., Ltd. 14 important parameters: 1. Positive working current IF: It refers. In actual use, you should choose if the if is below 0.6 · ifM. 2. Positive working voltage VF: The working voltage given in the parameter table is obtained under a given forward current current. Generally measured when IF = 20mA. Lighting diode is positive working voltage VF at 1.4 3V. When the outside temperature rises, VF will decline. 3. V-I characteristics: The relationship between the voltage and current of the emitting diode and the current. When the forward voltage is less than a certain value (called the threshold), the current is extremely small and does not emit light. When the voltage exceeds a certain value, the forward current increases rapidly with the voltage, glowing. 4. Luminous strength IV: The light emitting intensity of the light emitting diode usually refers to the light emitting strength in the direction of the method line (to the cylindrical luminous pipe refers to its axis). If the radiation intensity is (1/683) w/sr in this direction, glow 1 Candra (CD). Due to the small intensity of the light emitting diodes of LEDs, candlelights (Kandla, MCD) are commonly used as units in the luminous intensity. 5. Ore angle of LeD: -90 - 90 6. Spectrum semi-width : It indicates the spectral purity of the optical pipe. 7. Half -value angle 1/2 and perspective: 1/2 refers to the angle between the direction of the emitting strength value of half of the axial strength and the angle of light (method direction). 8. Full shape: According to the angle of the LED luminous stereo corner, also called the plane angle. 9. Perspective angle: refers to the maximum angle of LED light, depending on the perspective, the application is also different, also called the light strong angle. 10. Half -shaped: The angle between the method between 0 and the maximum luminous intensity/2. Strictly speaking, the angle of the maximum luminous intensity and the maximum luminous intensity value/2. LED's packaging technology leads to the maximum lighting angle of light is not the strong value of 0 . The introduction of deviation angle, which refers to the angle between the maximum luminous intensity and the angle between the method from 0 . 11. The maximum positive DC current IFM: The maximum positive DC current allowed to be allowed. More than this value can damage the diode. 12. Maximum reverse voltage VRM: The maximum reverse voltage allowed by the allowed to add is the breakdown voltage. More than this value, the light emitting diodes may be broken and damaged. 13. Working environment TOPM: The environmental temperature range that can work normally. Below or higher than this temperature range, the light emitting diode will not work properly, and the efficiency is greatly reduced. 14. Allowable power consumption PM: The maximum value of the accumulation of the direct DC voltage and flowing through the current of the two ends of the LED. More than this value, LED fever and damage. This article comes from LED lamp bead manufacturers. Reprinting needs to indicate the source HTTP: // Welcome to inquire: 13902912109 Mr. Jiang 310S stainless steel pipe personal resume template 304 stainless steel pipe Tibetan scriptures

Author: Tianhui-Air Disinfection Author: Tianhui-UV Led manufacturers Author: Tianhui-UV water disinfection Author: Tianhui-UV LED Solution Author: Tianhui-UV Led diode Author: Tianhui-UV Led diodes manufacturers Author: Tianhui-UV Led module Author: Tianhui-UV LED Printing System Author: Tianhui-UV LED mosquito trap

As summer approaches, so does the pesky problem of mosquitoes. These tiny insects can ruin a peaceful outdoor evening, leaving us with itchy bites and disease risk. Fortunately, there's a solution in the form of UV LED mosquito traps. These devices use the power of ultraviolet light to attract mosquitoes and other flying insects better. Not only do they make outdoor activities more enjoyable, but they also provide an effective means of air disinfection. As demand for UV LED mosquito traps continues to rise, more and more UV LED manufacturers are developing innovative solutions to keep mosquitoes at bay. Please read on! How do UV LED mosquito traps work? UV LED mosquito traps use ultraviolet light to attract mosquitoes and other flying insects. Mosquitoes are attracted to ultraviolet light because they use it to navigate in the dark. When a mosquito gets close to the UV LED mosquito trap, it is sucked in by a powerful fan and trapped inside the device. Once inside, the mosquito is either dehydrated or killed by a small electrical charge. Some UV LED mosquito traps also use additional attractants such as CO2 or heat to make the trap even more effective. By using UV LED mosquito traps, you can significantly minimize the number of mosquitoes in your outdoor space while also improving the air quality by disinfecting the air. The science behind ultraviolet light and mosquito behavior Mosquitoes use numerous sensory cues to navigate and find their next meal. One of these cues is ultraviolet light, which is present in sunlight and is used by mosquitoes to orient themselves. Mosquitoes can detect ultraviolet light using specialized cells in their eyes, known as photoreceptors. These photoreceptors are most sensitive to light in the 300-400 nanometer range, which includes the wavelength emitted by UV LED mosquito traps. When a mosquito detects ultraviolet light, it is more likely to fly in that direction, leading it toward the trap. However, not just ultraviolet light attracts mosquitoes to a UV LED mosquito trap. These devices also use other cues, such as heat and carbon dioxide, to mimic the scent and warmth of a human host. This combination of cues makes the trap even more effective at luring in mosquitoes, resulting in a higher capture rate compared to traditional insect traps. Lastly, by understanding the science behind mosquito behavior and sensory cues, manufacturers of UV LED mosquito traps can design more effective and efficient devices for mosquito control. The benefits of using UV LED mosquito traps for air disinfection. In addition to trapping mosquitoes and other flying insects, UV LED mosquito traps have the additional benefit of providing air disinfection. The UV-C light emitted by these devices can kill various pathogens, including viruses, bacteria, and mold spores, that may be present in the air. These pathogens can cause illnesses like the flu, colds, and allergies and even exacerbate conditions like asthma. Additionally, UV LED mosquito traps do not use any chemicals, making them a safe and environmentally-friendly option for air disinfection. By eliminating the need for chemical-based insect repellents and air fresheners, UV LED mosquito traps are a natural and effective solution for reducing the presence of pathogens in the air while also controlling insect populations. Top features to look for in a UV LED mosquito trap Here are some top features to look for when choosing a UV LED mosquito trap: ·Ultraviolet LED lights: Look for a trap that uses high-quality UV LED lights that effectively attract mosquitoes and other flying insects. ·Powerful fan: The trap should have a strong fan to pull insects into the device and prevent them from escaping. ·Easy to clean: Choose a trap that is easy to disassemble and clean, as regular maintenance is necessary for optimal performance. ·Safe for humans and pets: Look for a trap designed to be safe for humans and pets, with no harmful chemicals or emissions. ·Coverage area: Consider the size of your outdoor space and choose a trap that can effectively cover the area. ·Energy-efficient: Choose a trap that uses energy-efficient LED lights and low power consumption to reduce your electricity bill. ·Additional features: Some traps may have other features, such as CO2 or heat attractants, to increase their effectiveness. ·Durability: Look for a trap made with durable materials designed to withstand outdoor conditions. ·Warranty: Consider purchasing a trap with a warranty to ensure you are covered for defects or malfunctions. What makes UV LED mosquito traps more effective than traditional insect traps? UV LED mosquito traps have several advantages over traditional insect traps, making them more effective at controlling mosquito populations. Here are a few reasons why: ·Targeted attraction: Unlike traditional insect traps that use a wide range of attractants, UV LED mosquito traps use targeted ultraviolet light to attract mosquitoes specifically. This results in a higher capture rate of mosquitoes and fewer non-targeted insects being trapped. ·Environmentally friendly: UV LED mosquito traps use no chemicals or pesticides, making them a safe and eco-friendly option. Traditional insect traps may use harmful chemicals that can harm the environment or harm human health. ·Disinfection: As mentioned earlier, UV LED mosquito traps can disinfect the air by killing bacteria, viruses, and other pathogens. Traditional insect traps do not have this added benefit. ·Easy maintenance: UV LED mosquito traps require minimal maintenance, with some models even featuring self-cleaning mechanisms. Traditional insect traps may require frequent replacement of sticky pads or other consumables. Overall, UV LED mosquito traps are a more efficient and effective solution for controlling mosquito populations while providing benefits such as air disinfection and being eco-friendly. The rise of UV LED mosquito trap technology: where is the market headed? The market for UV LED mosquito traps is expected to continue its growth trajectory as consumers increasingly seek out eco-friendly and effective solutions for insect control. With the rise of mosquito-borne diseases, such as Zika and West Nile virus, there is a greater awareness of the need to protect against these pests. UV LED mosquito traps will become even more efficient and effective as technology advances, with additional features such as remote control and smart home integration. As the demand for UV LED solutions for mosquito control continues to grow, the market for these devices is expected to expand globally. Frequently asked questions about UV LED mosquito traps ·How do UV LED mosquito traps work?UV LED mosquito traps use ultraviolet light to attract mosquitoes and trap them with a powerful fan inside the device. ·Are UV LED mosquito traps safe for humans and pets?Yes, they are generally safe for humans and pets as they do not use harmful chemicals or emit harmful emissions. ·Do UV LED mosquito traps really work?Yes, they are effective at reducing mosquito populations when used correctly. ·How often should I clean my UV LED mosquito trap?It is recommended to clean the trap every 1-2 weeks for optimal performance. ·Can UV LED mosquito traps be used indoors?Yes, some models are suitable for indoor use. ·How much electricity do UV LED mosquito traps consume?They consume relatively low electricity, typically around 10-20 watts. ·Do UV LED mosquito traps attract other insects besides mosquitoes?Some traps may attract other flying insects, such as moths or flies, but they are generally designed to target mosquitoes specifically. ·How long does a UV LED mosquito trap last?The lifespan can vary, but most traps are designed to last several years with proper maintenance. ·Are UV LED mosquito traps more expensive than traditional insect traps?They can be more expensive upfront, but they may be more worthwhile in the long run due to their low maintenance requirements and lack of consumables. The environmental impact of UV LED mosquito traps. UV LED mosquito traps have a lower environmental impact than traditional insect traps that use chemicals or pesticides. They do not produce any harmful emissions or waste products and use very little energy. By reducing the need for chemical-based insect repellents, UV LED mosquito traps can also help to protect the environment and promote sustainability. They are a natural and environmentally-friendly solution for controlling mosquito populations and improving air quality. UV LED mosquito traps vs. chemical insect repellents: which is safer for you and the environment? UV LED mosquito traps are generally considered safer for humans and the environment than chemical insect repellents. Chemical insect repellents can contain harmful chemicals that can cause skin irritation, allergic reactions, and other health problems. Additionally, these chemicals can be toxic to the environment, including plants, animals, and water sources. UV LED mosquito traps, on the other hand, use no chemicals and emit no harmful emissions, making them a safe and eco-friendly option. By eliminating the need for chemical-based insect repellents, UV LED mosquito traps can help to protect human health and the environment while still providing effective mosquito control. Conclusion UV LED mosquito traps are an effective and eco-friendly solution for controlling mosquito populations and improving air quality. By using ultraviolet light to attract mosquitoes, these devices offer a targeted and efficient method for reducing the number of pests in your outdoor space while also providing added benefits such as air disinfection. Compared to chemical insect repellents, UV LED mosquito traps are a safer and more sustainable option for both humans and the environment. At Tianhui Electric, we offer a wide range of high-quality UV LED mosquito traps designed to meet your needs. Contact us now to learn more about our products and how they can help you enjoy a mosquito-free outdoor space. Thanks for the Read!