Now more and more product terminal manufacturers have strictly controlling product yield control, especially the transfer industry. Among the customer groups of Tianhui, the transfer industry, like film printing, has high requirements for the warning and deformation of the product. While completely solidifying, it not only requires the solid level of solidification, but also requires high efficiency and low adverse rate. This is unsatisfactory in the process of traditional mercury lamps in ultraviolet lamps. At this time, the advantages of UVLED high-power, low radiation heating, energy saving and power saving, and improvement efficiency are reflected. At the 2015 Korean exhibition, 80%-90%of transfer equipment manufacturers have launched their own UVLED light source transfer machine. what does that mean? This means that the transfer market can no longer accommodate traditional mercury lamps or halogen lamps, not only high energy consumption, but more products produce high adverse rates. According to a customer in the industry, since the previous mercury light source was replaced, energy consumption reduced by 80%, and the yield rate increased by 50%. Tianhui's UVLED light source core components are all imported from abroad. In fact, there is only one purpose to ensure that the stability of the customer's use and the consistency of the product. Perhaps many peers also have such products, and the price is also very advantageous, but in terms of the current technological development of the UVLED industry, it can have such price advantages. Tianhui is willing to explain the cause of the price for a while, and unwilling to apologize for the quality of the product for a lifetime. In fact, the product's good or bad everyone has a scale in their hearts, a penny and a penny, just like the mobile phone industry, some people buy high -end machines and some people are willing to buy cottage machines, but there is a difference in industrial products. Once the machine appears, once the machine appears Abnormal production cannot be carried out normally. It is less than 2-4 hours of stopping to be produced, as many as 2-4 days or more. For customers with tight periods, it is undoubtedly a heavy bomb. Time is the only way to test product quality and company reputation. Tianhui is willing to grow up with people with common value orientation and win a win -win situation! So, the question is, how can I get in touch with us? Tel: 130 4883 4002 Mr. Fu 1536107848 Email:




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

3535 lamp beads LED lamp beads have a unique advantage, but LED lamp beads are a vulnerable semiconductor product, so we must be careful when using LED products. Now we will summarize some of the LED use precautions. Please attach great importance to it. (1) Power supply should be used in DC power supply. Some manufacturers of manufacturers should be used in order to reduce product costs.“Resistance”Power on LED products by way, which will directly affect the life of LED lamp products. Adopting a special switching power supply (preferably a constant stream source) product supply to LED lamp bead products will not affect the service life of the product, but the product cost is relatively high. (2) Anti -electrostatic measures must be taken in the process of processing and production of LED lamp beads. Gloves, etc., those who have conditions can be installed with anti -static ion fans, and also ensure the humidity of the workshop at about 65%, so as to avoid the air from being too dry to generate static electricity, especially the green LED lamp beads are relatively easy to be damaged by electrostatic damage. In addition, different quality -grade LED anti -static capabilities are also different. LED lamp beads with high quality grade should be stronger. There may be a lot of friends who do not know the static electricity very well. I will introduce the knowledge of static electricity in detail here: the essence of static electricity is the surplus charge. Charge is the physical quantity of all the essence of static electricity. English is called ESD. Related amounts related to potential, electric field, current, etc. are all physical quantities caused by the existence of charge or the movement of the charge. Many electrostatic problems are caused by people without ESD consciousness. Even now, many people suspect that ESD will cause damage to electronic products. This is because most ESD damage occurs below the human feeling, because the human body's perceived voltage of static discharge is about 3KV, and many electronic components will be damaged when they are hundreds of volts or even dozens of volts. Usually, when the electronic devices are damaged by ESD There is no obvious boundary, and the component is installed on the PCB before detection. As a result, there are many problems, and the analysis is quite difficult. Especially for potential damage, it is difficult to measure the performance of its performance even with precision instruments, so both electronic engineers and designers have suspected ESD. In recent years, the experiment has confirmed that this potential damage will be Reliability decreases significantly. (3) The temperature of LED lamp beads should pay attention to the increase in temperature will make the internal resistance of LED lamp beads smaller. After the environmental temperature of the outside world increases, the internal resistance of the LED lamp beads will be reduced. The current rises, when the current operating current exceeds its rated work, it will affect the service life of LED products, which will be severely caused by LED lamp beads“Burn out”Therefore, it is best to use Hengli source power supply to ensure that the working current of the LED is not affected by the external temperature. The temperature of LED lamp beads is also the most important factor affecting the LED life. Please pay attention to it. (4) The sealing of LED lamp products, regardless of the LED lamp bead product, as long as it is applied to the outdoor, is facing the problem of waterproof and moisture -proof sealing problems. If it is not handled well, it will directly affect the service life of LED products. Now there are a small number of manufacturers with high product quality requirements adopt traditional epoxy resin“water”The method is to seal LED products. This method is more troublesome to operate. It is not very suitable for LED lamp bead products with larger volume, and it will also increase the weight of the product. (5) The current of the LED lamp beads cannot exceed the IF current of the LED lamp beads. (6) LED lamp beads must pay attention to the LED lamp beads should not be too close to the colloid when the corner or angle is bent. It should be kept at a distance of more than 2mm from the colloid. The number of foldings at the point cannot be more than three times, and the corner is bent into 90°Back to the original position once. (7) The welding temperature of the welding temperature is about 260 C, the time is controlled within 5s, and the welding point is above 2.5mm from the bottom of the colloid.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

Directly, choose the UVLED curing machine from these two aspects in these two aspects in recent years. In recent years, UVLED curing machines have gradually replaced traditional halogen ultraviolet lamps with many advantages such as energy conservation and environmental protection. However, how should users choose the UVLED curing machine correctly? TIANHUI has compiled some reference content for everyone from the following aspects of hardware configuration and actual functions today: First, the actual function of UVLED curing machines: Buy UVLED curing machine, the function must first meet the solidification needs, followed by environmental protection energy saving properties Considering safety and convenience. When the curing effect is verified, the effect of UVLED solidification can achieve the effect of traditional halogen lamps or even better. In terms of security, an important function of UVLED curing machine is fault protection. TIANHUIUVLED solid machine has temperature control and ultra -temperature alarm; dual protection device can ensure that LED is lit under normal conditions, greatly extending the service life. Second, the hardware configuration of the UVLED curing machine: the key point of buying a UVLED curing machine, the key point of the hardware is the lantern brand, power brand, protection settings, parameter control, etc. At present, there are many UVLED lamp beads sold in the market and different prices. Although they can achieve the solidification of UV inks and glue, they are very different in terms of effective light efficiency, curing speed and service life. Tianhui insists on choosing professional brand lamps at home and abroad to ensure product quality. UVLED lamp beads have very demanding power supply. There are many indicators to measure the quality of a power supply: power factor, conversion efficiency, self -temperature rise, impact current, constant current current stability, protection function, etc. Tianhui insists on choosing a large brand power supply. The independent development control system can make the UVLED curing machine system more stable. TIANHUI (WHLX) is a professional company focusing on the R & D, production and sales of UV LED curing machines. I hope to cooperate and win a win -win situation with customers and partners in the field of UVLED to create a better future in the future and create a better future.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

The three primary colors of the UVLED ink are mixed with different proportions to obtain the color spectrum color tone of the required color spectrum. Although printing design operators can only measure and set ink density within a limited range, these density range can help print designers get a large range of stacking ink color. The cover rate of yellow pigments is poor, and the cover rate of red and cyan pigments is good. But the surface of the yellow pigment ink can be high. The density range of the UVLED ink density in the printing design can be used in any ink stacking order, namely YMC, YCM, CMY, CYM, MCY, or MYC. But does the print design produce the same color? In fact, not, even if the field density is controlled by the absolute value, the sequence of each stack of printing in the print design will produce different stacks of red, green, and blue, because the printed UVLED ink formula is printed on each print design, such as Ink is opaque to the cover rate. Therefore, the surface of the dry film layer printed first can the attachment characteristics of the wet ink printed after the influence. More information is welcome to log in




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

The UVLED point light source of Tianhui is a long-developed improvement to create the current LX-C40. It can not only meet the needs of customers well, but also output high energy. First introduce UVLED point light sources. Each point of light sources consists of a single LED. Generally, the point light source controller can bring 4-8 point light sources to illuminate the head. Of course, there are 12 shot heads. Tianhui point light source is routine to have 4 or 8 illumination fiber with a controller. In order to meet the different needs of customers, Tianhui has two UVLED dot light sources, one is a key type model LX-D40, and the product picture is as follows as the new touch screen LX-C40. Duo Tianhui products are welcome to log in to the company's official website




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap