First of all, it is necessary to understand the power of the UVLED curing machine, especially the radiated light power is large and small. So how to choose the power of the UVLED curing machine? When the UVLED curing machine is cured by UV glue, it must meet the requirements of the spectral wavelength and power density of UV glue absorption. Today, the UVLED curing machine manufacturer Zhuhai Tianhui will tell you about the problem of the power selection of UVLED curing machine power selection. The consequences generated by the UVLED curing machine when selecting too much or too high power 1. The consequences of too small power: Especially the surface curing UV glue, if the power of the UVLED curing machine is small, then the irradiation time is long, the device is over the equipment No matter how many times, the product cannot be fully solidified. On the contrary, it may also lead to the aging, closure and brittleness of glue surface layer, and it will also affect the adhesion of UV glue to the substrate. Therefore, when choosing a UVLED curing machine that curing UV glue, we need to choose a curing machine with different power according to our needs. 2. The consequences of excessive power: Excessive power has no bad effect on the product, but it will increase the cost of the early equipment and the consumption of the later energy sources. How to choose the power of UVLED curing machine? How to choose the UVLED curing machine with different power? UV curing power generally meets the requirements of different UV glue performance: 1. For customers with surface curing applications, UVLED curing machine manufacturers need to configure the parameters provided by UV glue manufacturers. And the test of long -term projects can be performed to the best solidification effect. 2. For customers who are adhesive applications, it is necessary to consider the irradiation area and curing time. According to these two points, select the appropriate power of the UVLED curing machine. Because this not only directly affects the curing effect, but also involves the configuration of energy consumption, which is related to important factors such as manufacturing costs. The choice of power must not be sloppy, because this may lead to many problems in the later period. The one that suits us is the best. We are Zhuhai TIANHUI Technology Development Co., Ltd. Let's help you choose. Contact us quickly.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

As a new technology, UVLED is widely optimistic about its sustainable development. Its environmental protection, low energy consumption, environmental protection of raw materials. It has made great progress in environmental protection aspects. Flexible sealing is the two ends connected to the LCD display and the driver integrated circuit with flexible wires or band -type wires. Due to the effect of dust or humidity, it is easy to cause interference. UV ultraviolet light curing adhesives used for flexible seals should have low viscosity, which is convenient for flowing into the protected area, good adhesion, high purity, and no pollution. The well -combined combination of UV glue and UVLED optical curing equipment, which can most effectively complete and meet the requirements of flexible sealing. At present, environmentally friendly coatings basically develop to two roads, one is water -based paint, and the other is UV curing coatings. Water -based paint, as the name implies, is to use water for solvents, so during use, it can greatly reduce the existence of harmful substances. UV curing coatings are the aggregation and cross -linking reactions between the low molecular premature or cluster in the coatings of the ultraviolet light to cause the low molecular premature or cluster in the coating to obtain the hardening paint film, so as to achieve it No harm. However, because there are few categories and less publicity, many consumers do not understand at all. At present, environmentally friendly coatings can not be widely spread, and many consumers do not understand their excellent nature. UV curing coatings are so environmentally friendly, is there no disadvantage? Of course, the answer is "No". The first patent of UV curing coatings was born in 1947. After more than half a century of development, UV curing coatings have become more mature technology. Especially with the improvement of people's environmental awareness, production and researchers have paid more attention to UV curing coatings. Development and application. UV curing coatings are a green and environmentally friendly coating. It fully meets the "4E" principle. Generally, UV curing energy consumption is a small part of thermal curing, and UV curing coatings contain less volatile components, small pollution, the most attractive researchers And developers are UV curing coatings to reduce raw material consumption, which is conducive to reducing economic costs. UVLED optical curing technology is a photochemical reaction, which is similar to the traditional drying process, but the principle is different. The traditional drying process is generally the process of coating material due to the volatile of the solvent; The reaction of aggregation and radiation crosslinks quickly transforms low -molecular weight substances into a chemical process of polymer substances, which makes UV glue or ink change from liquid or semi -liquid to solid or semi -solid state. The UV curing system does not contain solvents or contains a very small amount of solvents. After irradiation of ultraviolet light, the liquid film can be solidified almost 100%. UVLED curing light sources in existing technologies usually use wind cooling or water cooling. Among them, the water cooling and wind -cooling method for UVLED curing light sources is better. As an environmental protection technology, people are committed to promoting it extensively. Make it widely app. Now UVLED technology has begun to slowly replace the market for traditional mercury lamps. Zhuhai TIANHUI Technology Development Co., Ltd. specializes in UVLED, UVLED wire light sources, UVLED face light sources, UVLED dot light sources, UV point light sources, UVLED light sources, UVLED curing machines, ultraviolet curing machines, UVLED ovens development, production, sales and technical services , Is a professional UV -point light source manufacturer, UVLED manufacturer, UVLED manufacturer. Welcome colleagues in various industries to call for letters to inquire!




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

Compared with ordinary inks, UVLED inks have good printing adaptability, color stability, stacking effect and lightness. its solidification speed is fast. Under the light of UVLED UVLED, it can be solidified for a few seconds, especially in packaging and printing. It is often necessary to print a large area of large -scale fields. At this time, the problem of drying becomes very important. Ink is not easy to dry, it often affects the efficiency of printing production. Instead, the UVLED optical ink is used in ultraviolet rays. UV UVLED ink can also prevent the ink cutting skin, solving the worries when the plastic printer is stopped. The conjunctiva is good and has good adhesion for various types of printed materials. Because the ultraviolet UVLED ink does not contain solvents, the thickness of the ink layer after curing is basically the same as the thickness of the printing ink layer. Compared with, 30 % -50 % of the printing area is large. There is no penetration when curing, and can be printed on non -absorbing materials, such as the printing of the card card, etc. This is an area where ordinary plastic printing ink cannot be involved in. Because the UVLED ink does not need to be sprayed when printing, the printing environment has been improved well, and the troubles that are caused by the processing of printed due to the spray spraying, such as the impact on the effect of light and coating. Can be connected. UV UVLED ink color is colorful, and its scratch resistance, abrasion resistance, acid and alkali resistance are better than ordinary ink. Therefore, although its price is much more expensive than ordinary ink, it is still widely used in widely used. For more consultation, please log in to the official website of tianhui




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

As long as the Violeds that is used for sterilization of space station for 5 minutes, it can reach 99.9%of the hepatitis C hepatitis C sterilization effect. Hepatitis C is a infectious and irregular disease, and this discovery is an effective way to prevent and prevent infection from infectious. At present, we are understanding various disinfection applications, such as home -style sterilization devices, disinfection equipment for listeners, medical equipment, brushes, etc. At present, I have been assisted by Saudi Arabia, and is undergoing research on the effect of disinfection of MERS virus. UVLED (UV light diode) solution company Seoul Viosys announced that they provided them with Violeds of the space station to South Korea's research center for hepatitis C. Researchers (NRL) found that 99.9%of hepatitis C was exposed to 5 minutes. All were killed afterwards. A recent hospital in South Korea has erupted hepatitis C, and all walks of life also expects researchers to find out that the current situation can be improved. It is hoped that items that can be exposed to the most basic disinfection patients and medical staff will make items that patients with hepatitis C have come into contact with, such as dentist equipment, blood extraction, surgery knife, scissors and surgical beds, diagnostic tables, patients, patients, patients, patients, patients, patients, patients, patients Beds and injection syringes can effectively kill hepatitis C virus. Hepatitis can be divided into five types according to the type of virus, that is, A, B, C, D, and E. Hepatitis C is transmitted through blood, body fluid, sexual behavior or use of polluting medical equipment. Those who are infected will develop into chronic hepatitis, and no effective vaccine can prevent hepatitis C. The biggest contribution of this research led by Professor Soon-Bonghwang is to use VioLEDS to eliminate hepatitis C virus. In contrast, the raw materials used in UV mercury lamps will actually form a source of pollution, and such mercury lamps are usually large and occupy very space. Not to mention the heat dissipation problem of mercury lamps needs to be resolved. The characteristics of VioLEDS efficient, lightweight, and longer life make this technology can be made into micro -medical equipment. Seoul Viosys plans to cooperate with the research team of Hanlin University to popularize this technology to the world to prevent cross -infection of hepatitis C. Violeds technology is not only applied to hepatitis C, but also to study the method of killing MERS virus. Professor Nakamura Nakamura, a Nobel Prize winner who served as a consultant to Viosys UV LED, Seoul, said that he was commissioned by the Saudi Arabian government and was conducting research on eliminating MERS viruses. Professor SOON-BONGHWANG, authoritative hepatitis of Life Sciences from Hanlin University in Korea, said: "VioLEDS can eliminate a virus of 99.9%C type hepatitis. We hope that this technology can be generally applied to clinical clinical and reduce infectious diseases to prevent virus broadcast. I also hope that this technology can extend to daily life, become a popular mass disinfection technology, and become a favorable tool in various medical fields. "Gichoonlee, Vice President of Viosys, Seoul, proposed that in South Korea, SMEs need to conduct research and commercialize a technology. After ten years of research and development time, we hope that the government can favorable technology in commercialization. This It is more positive and provides substantial help to allow technology to directly benefit the people. "In addition, he also said that VIOSYS will continue to develop and hope to contribute to human health.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

Some materials used in the fields of industry or high -tech are very high performance and are also very good for the environment, but the continuation and printing of these materials are generally very poor. TIANHUIUVLED optical curing machine uses a clean and efficient UVLED light source. After processing these materials, it can get and its clean surface and powerful surface. The basic reaction of modification is the oxidation reaction caused by UVLED light. After UVLED illuminates the surface of the solid, the pollutants on the surface are oxidized, and then decompose to volatile substances such as CO2 and H2O. And the surface forms favorable surfaces, such as OH, COO, Co, COOH and other hydrophilic atoms. The progress of TianhuiuVled light source technology guarantees the UV/O3 surface modification technology to give full play to its outstanding superiority. UV/O3 Surface modification technology can obtain extremely high cleanliness and surface continuation, which is increasingly widely used in solid surface treatment. Features: Treatment in the atmosphere, simple, convenient, environmentally friendly, no secondary pollution, no need to heat, medicinal solution, etc. The cleanliness is extremely high, below the single molecular layer, the continuous process of processing methods that are difficult to imagine can be obtained. Domestic unique ultra -high -power short -wave length of ultraviolet light sources, only in a short time (second unit), exerting strong processing capabilities, from research and use of mass production. Effective irradiation of most plastic forming products and wide applicability. It can avoid a large amount of medicinal solution, thermal energy, etc., and the operating cost is low. For example, the surface irradiation of engineering plastic PBT (polytinyl diite dilate), the results show that the combination of C-H on the surface after irradiation decreases, -COO-increase, and C = o produces, indicating that the surface is modified on the surface modification. In this way, the hydrophilicity of the more polar oxygen and oxygen atomic groups is improved. After the surface treatment, it is very effective for improving the surface of the material.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap