The use rate of UV inks in the printing industry is getting higher and higher. However, when printing some materials with UV tablet printers, is there any problem that the UV ink has low adhesion to the bottom material because of the instantaneous drying of the UV ink? Below teach you how to improve the adhesion of the UV ink to the bottom material. 1. Electric halo treatment Electric halo treatment is a method that can effectively improve the adhesion of the UV ink. The positive and negative poles of the electro -halo device are grounded and induced electric air nozzles, respectively. With high -energy acceleration acceleration to the positive electrode, this can enhance the ability to combine with ink, improve the purpose of the ink layer attachment,. 2. In many cases, the UV ink attachment force promotion agent will increase the base material with alcohol will increase the adhesion of the UV ink on the bottom material. If the attachment of UV ink is very poor, or the product's requirements for the attachment of the UV ink are relatively high, then you can consider using the primer/UV ink adhesion to promote UV ink attachment. Third, UV ink solidification is generally speaking. In the case that UV inks are not completely solidified, we can observe the phenomenon of poorly attached UV inks on non -absorbing substrates. Increasing the degree of solidification of UV inks can start from the following aspects: 1. Increase the power of UV -optical curing lights. 2. Reduce printing speed. 3. Extend the time of solidification. 4. Check whether the UV light and its accessories work normally. 5. Reduce the thickness of the ink layer. Fourth, other methods heating: In the screen printing industry, before printing the difficulty attached material, it is recommended to heat the bottom material before UV curing. After using near-infrared light or far infrared light for 15-90 seconds, the attachment of the UV ink on the bottom material can be strengthened. For more information, welcome to enter the official website




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

The principle of solidification of UV coatings: UV coatings are caused by the light caused by UVLED, producing sculpting groups or ions. Body gene, these monomer genes start chain reactions to generate polymer solids, a complete solidification process ends. Let's talk about several factors that affect their deep solidification. I. The deep curing of UVLED energy influence of ultraviolet radiation. The main condition is that the molecular absorption of light quantum with sufficient energy becomes stimulating molecules, breaks into free radicals or ions, and allows saturated organic objects to aggregate, delegate, cross -linking and other chemical reactions , To achieve the purpose of solidification. Among them, the UVLED energy of the light caused by the light caused by the provided UV coatings exceeds or less than the impact of the energy required: 1. I do not know that the UVLED cold light source energy required by the light caused by the light cause, such as blind supply, is not only a waste of energy, but also the energy, but also It will cause excessive solidification negative effects, such as explosion gathering, reflux reactions, etc. 2. When UVLED is insufficient, it cannot be completely solidified. Second, the thickness of UV coating thickness affects the effects of UV coating on the effect of ultraviolet curing. The coating is too thick, and the drying time is relatively long under the irradiation of the same power light source. On the one hand, it affects the drying of UV coatings. In addition On the one hand, the surface temperature of the substrate will be too high, resulting in deformation of the substrate; too thin coating will cause the product's surface gloss. In addition, the hue, temperature, curing speed, and substrate surface of the UV coating coatings need to be appropriately prepared under different conditions such as different conditions such as. Third, the effect of the curing distance. UV lamp Depending on the difference in curing substrates, the general distance is about 10-15mm. The curing distance must be appropriately adjusted with the radical power of the substrate, coating, and the UVLED light. Fourth, the impact of UV optical curing speed Depending on the substrate, coating, coating, curing distance, etc., appropriately adjust the curing speed of the device, the fixed speed is too fast, the UV paint on the substrate surface is sticky or the surface is not dry; The surface of the material will be aging. Fifth, the impact of the working environment. When the viscosity of UV coatings changes greatly due to the temperature, the room temperature should be adjusted. Generally, 15-25 C is more appropriate, and it is not necessary to be direct when solidified.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

The LED industry, I believe everyone is no stranger to 020RGB side luminous beads, but some of the specific products are still not very clear. Today, I will introduce you to the 020RGB side luminous light beads. SMD, 020RGB lamp beads Appearance size: 3.8*1.2*0.6mm, colloid color Colloid color: transparent, luminous color: RGB, light emitting angle: 120°. A, 020RGB lamp bead color: red, green, blue color color (can be made in various colors) B, 020RGB lamp bead packaging: 5000pcs/plate; C, 020RGB lamp bead packaging method: anti -static pumping and vain packaging D, 020RGB D, 020RGB Light beads packaging: high -temperature PLCC shell, imported silicone, Zhuhai bracket E, 020RGB lamp bead characteristic: color, small volume, large angle, high brightness, low voltage driver, good color consistency, no color difference; long life, energy saving and environmental protection. F, 020RGB lamp beads Recommended range: soft light bar, LED light bar light belt, mobile phone, digital and other backlight products, 020 SMD LED decoration, etc.; ROHS standard I, 020RGB lamp bead production equipment: fully automatic solid crystal and welding wire, high -precision point adhesive machine, fully automatic spatuan machine manufacturer specializes in the production of LED020 side light beads, side luminous lamp beads 020RGB colorful lamps 020 tested light orders Color lamp beads: green light, blue light, orange light, purple light 020 side light powder blue light Zhuhai manufacturer's batch production 020RGB lamp beads are recognized by major manufacturers, manufacturers' research and development teams continue to adopt 020RGB to develop a series of new products developed by the lamp beads to develop a series of new products. Among them, it is widely used in smart home appliance indicators, mobile phone backlight, industrial control equipment, traffic signal lights, robots, smart toys, electronic handicrafts, electronic toys, exquisite and high -end electronic lamps, lighting lighting, daylight pipes, automotive taillights, scientific instrument lighting, and various types Game machine display lights, traffic signal lights, flashing lights, prompt lights, alert lights, various energy -saving display lights, 020 side luminous light bands, etc. Shenzhen Co., Ltd. not only develops and produces 020RGB side light beads, but the company shines on the side, and the company is shining on the side. High temperature, ultra -long foot, anti -decay, high -grade fingers, mixed colors have accumulated rich experience. The main products include infrared LED, ultraviolet LED and patch LED. Choose LED lamp bead manufacturers, preferred manufacturers, and partners who need need can consult the official online customer service staff online.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

Use three 0603 packaging size LED red lights to display the power, use the four-computing comparator LM339 chip design control circuit, control the three-segment LED highlight display, can be used as a 2-5 string of lithium battery/nickel-hydride battery/various batteries/various batteries The amount of electricity is displayed. Intelligent electronic switch control control and turn off the circuit. When the power does not display the power, it does not consume power, the standby does not consume power, and energy conservation and environmental protection. The battery power is clear at a glance with a light touch switch. Durable. Simplicate application: No need to control the single -chip microcomputer, no burning program. It is suitable for designing the circuit design of the electricity status of various battery packs. Suitable for DIY electronic enthusiasts/electric battery battery display/can also assist Batai application design.




Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

Water and food quality is vital to protecting our health, well-being, and quality of life. We all know that when water becomes contaminated with harmful viruses, bacteria, or parasites, it can cause major sickness and even death. But what is less commonly known is that when food becomes contaminated, it can lead to malnutrition or other chronic illnesses like obesity. This blog will talk about the UVC treatment process, one of the most effective methods for protecting our water and food against harmful contaminants.

UVC treatment is a process that uses ultraviolet light to kill viruses, bacteria, and parasites. It is a very effective method for disinfecting water and food and has been used for many years to protect public health. The process is simple: water or food exposed to UV helps kill the harmful contaminants.



UVC treatment is an important part of ensuring the safety of our water and food supply. It is a simple, effective way to kill harmful contaminants and keep our families healthy.

What Are UVCS, And Why Are They Important?
UVCs are ultraviolet rays, and they are important because they can help purify water and air and sterilize surfaces. They are also used in food production to kill bacteria and viruses. In healthcare, UVCs are used to disinfect medical equipment. What are the dangers of UVC radiation?

UVC radiation can be harmful to the eyes and skin. It can also cause DNA damage.

How Does A UVC Work To Protect Our Food, Water, And Quality Of Life?
UVC kills bacteria, viruses, and other microorganisms that can contaminate food, water, and the quality of life. It does this by emitting ultraviolet light at a wavelength of 254 nanometers, which is absorbed by the DNA or RNA of these microorganisms. This damages their DNA or RNA so they can no longer reproduce, effectively killing them.

UVC is used in various settings to protect food, water, and the quality of life, including hospitals, food processing plants, and water treatment facilities. It is also used in home aquariums and ponds to keep the water clean and free of harmful microorganisms.

Why Is That Important?
It's no secret that the quality of our food, water, and air has been declining in recent years. Pesticides, herbicides, chemicals, and other pollutants are polluting our environment and causing serious health problems. UVC treatment is a safe and effective way to cleanse these contaminants from our food, water, and air.

UVC light can destroy bacteria, viruses, and other microorganisms without harming the environment or human health. This makes it ideal for purifying our food, water, and air. The UVC treatment is also effective in breaking down harmful chemicals and pollutants. This means it can help improve the quality of our food, water, and air.



When Is The Right Time To Use A UVC?
UVC light has been used for decades to disinfect surfaces and protect against harmful microbes. In recent years, the use of UVC light to disinfect food and water has become more prevalent to ensure safety and quality.

There are a few key factors to consider when determining whether to use UVC treatment on food or water.

The first is the type of food or water being treated. UVC is most effective against bacteria, so it is ideal for treating meats, dairy products, and products prone to bacterial contamination. It is less effective against viruses, so it is not as useful for treating water that may be contaminated with viruses.

The second factor to consider is the level of contamination. If there is a high level of bacteria or virus contamination, it may be necessary to treat the food or water with UVC to ensure safety. However, if the level of contamination is low, UVC treatment may not be necessary.

The third factor to consider is the time frame in which the food or water will be consumed.

Sterilization Of The Surface
Germicidal lamps are advantageous for any surface sterilizing procedure because UVC light, which reaches any surface, has been shown to be successful at getting rid of a variety of bacteria, viruses, and dangerous diseases. When the area is clean and devoid of debris, which can prevent the Ultraviolet rays from fully reaching hazardous bacteria, UV surface sterilization is more effective. Surface sterilizing is quite efficient in increasing the safety of employees and customers in restaurants and kitchens.

Eatery Sanitization Arrangements

UV light food cleansing restaurant UVC germicidal lights furnish many advantages to cafés with food illumination, an FDA-endorsed technique for sanitizing food and assisting with forestalling foodborne diseases.

Kitchen Hood Exhaust UV water disinfection
UV light food UV water disinfection kitchen hoodlum lights in business kitchen hood depletion give an additional advantage in separating oil and forestalling oil development.

Air Disinfection
There are many sorts of air sanitization frameworks that can be introduced in any private, business, or modern structure. UV air purging is profoundly successful at wiping out unsafe airborne infections, and UV air conditioning frameworks help to clean and decontaminate the air naturally.



Water Sterilization
UV light food cleansing water and beverages lights in water sanitization is profoundly powerful and takes out a few destructive microorganisms that chlorine doesn't. UV light cleans fluids in the food and drink industry, such as sweet syrups and fluid sugars, which can be a favorable place for unsafe microorganisms.

Where To Buy UVC Treatment From?
Tianhui Electric to give you the highest quality products at reasonable rates with prompt delivery. EMC, RoHS, CE, FCC, and UL certifications have been granted to our products. We are always interested in discovering more about your requirements and would be pleased to provide you with any assistance. If there is anything else we can do for you, don't hesitate to contact us!

With a full production run, consistent quality, dependability, and affordable costs, Tianhui Electric has been involved in UV LED packaging, particularly for UV Led manufacturers. We have more than 20 years of experience offering OEM/ODM services. We can produce goods with a customer's logo and with any kind of packaging the client desires.