With the development of electronic technology, the application of circuit boards is becoming more and more widespread, and people's awareness of environmental protection has also paid more and more attention. In the printing industry, lighting industry, packaging industry, etc. Energy -saving and environmentally friendly products are also continuously launched, and the UV industry is no exception, such as new UVLED curing light sources, UVLED exposure light sources, etc. UVLED exposure machine light source is LED exposure light source, LED exposure light source replacing UV traditional mercury lamp exposure light sources is also an inevitable trend of the times. LED exposure light source energy saving, environmental protection, and high work efficiency are the most ideal alternative of UV traditional mercury lamp exposure light sources. LED exposure light sources are widely used in PBC circuit board manufacturing, semiconductor manufacturing and high -precision circuit board exposure. In contrast to the traditional 8KW exposure light source (exposed area 1000mm*750mm) and LED exposure light source (exposed area 1000mm*750mm), according to the general PCB factory two -shifts per day per day to calculate electricity costs, the traditional 8KW exposure light source monthly The electric energy consumption is 12,000 yuan, the electricity cost consumption of the year is 144,000 yuan, and other consumables have not been calculated. And LED exposes the electricity cost of the light source for more than 2,000 yuan per month. It only needs to pay the electricity bill of less than 30,000 yuan a year. In terms of electricity bills, the cost of a machine is saved in 3 years. However, the traditional exposure machine uses mercury lamps. Due to the short life of mercury lamps, general mercury lamps need to replace the new lamp in one month, which increases the maintenance cost of the equipment and reduces the work efficiency of the equipment. The LED exposure light source uses high -power UV LED lamp beads. The service life is 20,000 hours, which greatly reduces maintenance costs. At present, the application market of LED exposure light sources abroad is wider than mainland China. However. For ordinary companies, this is difficult to achieve. From the perspective of the development of the enterprise, it will also become a bottleneck in the development of the enterprise. Simply put, the cost is too high, no advanced equipment, and natural high -profile projects cannot bear. Without high profits, there is no funding to buy new equipment. The company has fallen into a dead cycle without any major development. Therefore, the domestic LED exposure machine is the best choice for SMEs to get rid of the current situation. TIANHUI has always regarded energy conservation and environmental protection and efficiency as the mission and pursuit of the enterprise, especially in UVLED curing technology and products. Contributions to arranging careers! Tianhui, look forward to your call: 13048834002

Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

In recent years, with the rapid development of the UVLED industry. The chip has always been the technology core of the UVLED industry. Then the development of chip development and quality directly affects the development speed and maturity of the UVLED light source industry. UVLED has been pursuing high performance development. The pursuit of high luminous efficiency has always been the driving force for the development of LED chip technology. Installation technology is one of the main technologies that currently obtain high -efficiency and high -power LED chips. Sapphire in the substrate material and the vertical structure of the vertical structure (LLO) and key combination technology of the supporting vertical structure will still occupy the rule for a long time. status. Photon crystals and AC LED technology will be a technical technology for future potential. In the near future, the new metal semiconductor structure is adopted to improve Ohm contact, improve the quality of the crystal, and improve the electronic migration rate. Improve the shape of the LED chip, the surface thickness and the photon crystal, the high reflectivity mirror, the transparent electrode, the extraction efficiency can be 90%. At that time, the total efficiency of the white light LED can reach 52%. With the improvement of UVLED light effects, on the one hand, the chip is getting smaller and smaller. In a certain size of the outer chip, the more the cut chip can be reduced, thereby reducing the cost of a single chip, reducing the price of the price. If 6mil appears. On the other hand, the power of the single chip is bigger, such as 3W, 5W, 10W development. This can reduce the number of chips in applications such as the lighting of power demand and reduce the cost of the application system. Under the pressure of market competition, if the UVLED industry wants to truly break through the bottleneck of development and active rights in the market, it must have a strong chip technical advantage in order to have the driving force for development. At the same time seize the market opportunities, adjust the company's market and product positioning, highlight your advantages, and jointly develop and expand the future prospects of the market. For more information, welcome to enter the official website

Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

From the perspective of the UVLED light source system in recent years, the UVLED ink has developed quite fast, and there is a trend of replacing traditional inkjet inks. UVLED ink brings us a variety of benefits, and the voltage -type nozzle technology provides a new field of inkjet ink with a development opportunity, which is expected to make the screen printing reaches a new scale; UVLED ink has many advantages in many advantages , Including: 1. Quickly solidify; 2. Ink composition stable; 3. Do not block the nozzle and do not need to clean the nozzle; 4. Low energy demand; 5. There is no volatile organic matter; 6. Suitable for all kinds of soft and hard bases Materials; 7. Good print quality and resistance, such as friction, water resistance, and light resistance; 8. The advantages of UVLED light sources will be listed: 1. It belongs to the cold light source, no heat radiation (being illuminated The surface temperature of the product is only about 3 degrees, not deforming). 2. The service life of this product is long, and the service life is not affected by the number of switches (about 25,000 to 30,000 hours). 3. Fast curing time (500ms-5s) According to the characteristics of the ink, and the effect is good, there will be no phenomenon. 4. The irradiation area is uniform, the range is wide, and the area can be solidified in large areas. 5. Energy 髙, the light output is stable, use it without preheating, it can reach 100%power ultraviolet output, the irradiation area can reach 3600MW/CM26. The volume is small, which is easy to carry and install (easy to install, can be easily integrated into inkjet inkjet in inkjet spray Print device). 7. Small calories, which can be completely solved by mercury lamp injection or printing equipment, and cannot print PT, PET materials and other problems. 8. It does not contain toxic substances 'mercury', which is safer and environmentally friendly than traditional light sources. 9. Electricity (power consumption is only 10%of the traditional mercury lamp curing machine, which can save 90%of the power). For more LED UV information, please consult Tel:

Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

The traditional watch sticker LED lamp beads are basically a pixel, three or three or four LED lamp bead crystals including red and blue; traditional COB LED lamp beads will be hundreds of or more than tens of thousands of LED lamp bead crystals Sex packaging in a foundation layout. The four-in-one MINI-LED lamp beads are the integration of COB LED lamp beads and table stickers. It accepts integrated packaging skills, that is, a small small-scale packaging skills, horizontal and vertical and vertical separation of 2 LED lamp beads. Unit, every of which; LED lamp beads are still encapsulated by RGB three -color chip. Acquisition inventory LED lamp beads with one mini-LED lamp beads are encapsulated in a LED lamp bead layout, which has the display function of COB LED lamp beads ". Second, terminal screen acceptance through case welding process, continuing the low cost, maturity, and single bad light of the table sticker skills to maintain the upper hand. Third, while controlling the cost, not only is satisfied, but also the requirements of the limited geometric size are avoided. Fourth, four-in-one pixel packaging reduces the "welding homework range" on the area of the "ultra-small spacing LED lamp bead display", and jointly accepts the smaller MINI-LED lamp crystal granules, which is more suitable " The spacing indicator of the spacing indicator of the smaller and smaller ". The error error of the four-in-one mini-LED lamp beads is also an imperfect wall: that is, it is the same as that of COB LED lamp beads. During the packaging stage, the "display pixel spacing of the display pixels has been passed through the packaging stage. Sure". There are 4 pixels in a LED lamp bead. If any one is presented, it also symbolizes the need to change the entire four -in -one LED lamp beads. This makes it suffer, and the production manufacturers must provide more specifications of four -in -one LED lamp beads.

Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

UV LED curing transforms inks, coatings, adhesives, and other photo-reactive materials into immediately fixed-in-place solids through polymerization using efficient electron ultraviolet (UV) light. In contrast, "drying" solidifies chemistry by absorption or evaporation.

Its advantages are huge and quantifiable to numerous modern printing organizations, going from a cooler, cleaner relieving than that refined with mercury bend lights normal with ordinary techniques to speedier and more customary results, efficiency, and a diminished natural engraving.

To take it a step further, operators can program the precise UV energy required for altering process needs to decrease product waste, increase output capacities, and utilize production lines as effectively as possible. In systems with several units, turning off specific modules to save electricity without affecting the production process or product quality is feasible.

How does UV restore work?

UV restoring is a diminished, fast, dissolvable free photochemical cycle that changes inks, coatings, cement, or other photograph-responsive materials into solids that are quickly fixed and set up through polymerization utilizing high electrical bright (UV) light. Interestingly, "drying" hardens science by assimilation or vanishing. The ideal result of UV restoring is for the relieving materials to have an adequate profundity of the fix as opposed to becoming shabby, tacky, or flaky and to be safely clung to the medium onto they were put.

Spot relieving, flood restoring, hand-held restoring, and transport restoring are a few sorts of UV relieving. UV restoring frameworks utilize different lights as the UV light sources, including light-producing diodes (LEDs), which just result from UVA radiation, and mercury-based curve lights, which give an expansive range of UV light. UVC LEDs are plausible, but they have significantly lower power results and productivity.

Mercury circular segment (HG type) lights are regularly utilized as UV-restoring answers for print and other modern cycles. They have for quite some time been the business standard.

They have downsides in any event when they capability appropriately. The way that they produce a ton of intensity and utilize a great deal of energy is what's generally significant. Furthermore, they produce mercury curve bulbs, which impact the climate and should be discarded at a cost and under administrative examination. They likewise cause oxidation, which requires exhaust frameworks to protect air quality.

Every one of the advantages of traditional UV relieving is presented by Drove-based UV restoring, which likewise addresses a significant number of the issues with heat-set drying. Prompt on/off, speedy and reliable drying/restoring, low-intensity results, and low power utilization is some of them. Moreover, Drove UV's conservative structure size pursues it the best decision for joining into systems or gear with restricted space.

A Cleaner, Cooler Cure

they don't produce infrared heat and run at much lower temperatures than conventional mercury arc Ultraviolet curing lamps, LED UV curing systems have the advantage of avoiding the heat-related risks and energy expenditures of heat-set drying.

LED UV generates very little heat, draining from the module's back and cooling the substrate side. This makes it feasible to print without deformation or damage on a considerably wider variety of heat-sensitive substrates than using mercury discharge lamps, including films, plastics, and other materials that just don't absorb inks.

One of the biggest advantages of UV-curing systems is removing a necessary drying stage. Drying powder to keep sheets from sticking on offset presses is no longer necessary, thanks to UV curing, which considerably reduces cleanup and maintenance.

All UV-curable inks have the benefit of sitting on the substrate's surface rather than penetrating it, as most other inks do, which reduces the amount of ink needed to produce an image density that is comparable to that of traditional inks. This is especially helpful for non-porous materials, where less ink is preferred to manage dot size.

Area of application for UV-LED curing Offset printing and high-speed brushing

The primary attributes of a high-speed UV Led printing system are speed and efficiency. It is a type of UV LED Printing System that reduces the amount of time needed for UV LED Printing System and is outfitted with a conventional UV-cured mercury lamp.

With the use of UV LED going to cure light sources, you can achieve long-distance high-energy ink immediate curing, high gloss, color fidelity, and clarity while also saving energy and protecting the environment. Releasing mercury and ozone, starting instantly, being safe and convenient, not requiring preheating, allowing teardown and cleaning between splints, and UV LED has a lifespan of up to 20,000+ hours. stacking with instant curing and no. 

Drying problems An inkjet printer

The inkjet industry has seen the most innovation recently, and the benefits of UV-LED curing may be used to satisfy the demands of this industry, which is why the market currently gives UV-LED curing technology a lot of attention. The advantages of UV-LED inkjet UV Led printing system include energy savings, great efficiency, excellent UV LED Solution, and adaptability to various surfaces. Applications include label and packaging printing, sizable inkjet printing, and decorative or industrial UV LED Printing System

UV-LED coating print is more energy-efficient and environmentally friendly than regular UV printing, has a long lifespan, may cut energy use by up to 70% to 80%, and has exceptional adaptability to materials like paper.

Where to buy the UV LED curing from?

Zhuhai Tianhui Electronic Co., Ltd., one of the top UV Led manufacturers, works in UV Drove air purification, UV Drove water sanitization, UV Drove UV LED Printing Systemand restoring, UV Drove diode, UV Drove modules and different products. It has a gifted Mastery and tasks group to offer purchasers UV Drove Arrangements, and its products have likewise won the commendation of an enormous number of clients.

With a total creation run, steady quality and reliability, as well as reasonable expenses, Tianhui Gadgets has been working in the UV Drove bundle market. From short to long frequencies, the items cover UVA, UVB, and UVC, with full UV Drove specs going from low to high power.

We are familiar with an assortment of UV Led applications, including UV relieving, UV restorative, and UV sanitizing.

Conclusion

The advantage of LED-based UV lamps over classic arc-based lamps is that they turn on just when necessary and are ready to cure right away, whereas traditional arc-based lamps must be left on during manufacturing and require an initial warm-up phase, which delays production.