Compared with the UV curing light, UVLED has many advantages: no mercury, no environmental pollution, no health risk; long life; low radiation attenuation; easy control and adjustment, etc. Therefore, UVLED has broad application prospects and can be used in many fields such as solidification, testing, medical treatment, beauty, sterilization, disinfection, communication, etc. Medical (light therapy) The number of cell apoptosis and necrosis after being exposed to ultraviolet LEDs and traditional light source systems through comparison. This proves that the potential and possibility of new light sources for phototherapy can replace traditional ultraviolet fluorescence lamps with bulky, short life, and greater energy consumption. Fluorescence testing (biological testing) is difficult to provide periodic response, unable to form clear fluorescent analysis images in fluorescent detection, and the fluorescent strength of organic matter is declining with exposure time. Control module to realize the fluorescent test of organic dye BL-ORT. Sewage treatment (sterilization disinfection) researchers and other researchers using bacteria and chemical indicators in wastewater to evaluate UV-A or UV-C LED and the combination of the two for the treatment of urban sewage. The experiment monitored the residual rate of the biological indicators in the urban sewage and the oxidation rate of creatinine and phenols in the urban sewage. As a result, compared with the use of a UVLED alone, combined with the use of UV-A and UV-C ultraviolet LED device can be more able to be more able to be more Effectively reduce the content of microorganisms in wastewater, and can oxidize 37%of creatinine and phenols. This result is comparable to the effect of using photocatalysts such as TIO2. The technicians of compound degradation (optical degradation) technicians have studied the effect of 255 NM UVLED wire printing solidification and H2O2 intermittent reactor for the effect of reverse osmosis concentration in urban sewage in high salt. Taking the concentration of organic carbon (DOC), color, and pH (pH) as the detection index. The research results show that the reactor can cause the chemical key to break and change the molecular structure of the hair color group, degrade the polymer compound into a low molecular quantitative compound. This proves that UVLED has potential application prospects in the field of reverse osmosis concentrated degradation treatment. Printing lithography (optical curing) UV curing lamp is one of the main directions of the current UVLED application industry. The research team of Bolin Green State University compared the effect of UVLED and traditional UV light sources for acrylate curing in 2007. It studied the aggregation rate of the two and the generation coating performance. Various areas of curing applications. More information is welcome to log in

Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

TIANHUI is about to welcome the 10th anniversary of the establishment. In the past ten years, Tianhui has grown from an ignorant teenager to a supplier of the entire industry UVLED solidification application. These growth is inseparable from the trust and support of all new and old customers. Today there is such a atmosphere in society. Everyone wants to earn higher benefits, but does not want to pay more for this. It feels very impetuous. In the past ten years, there have been many new peers in China. Although each product application field is different, in the eyes of peers, who has the real research and development strength, and who has a higher cost -effectiveness, everyone's hearts are in their hearts, everyone's heart Know the belly. Tianhui rarely walks in various exhibitions like some siblings, running around various wine tables. While creating value for customers, it also improves its own brand effect. It is not difficult to find that many partners who have used TianhuiuVLED curing machines often introduce their own colleagues to adopt the Tianhui solution. This is the pride of the Tianhui people! While improving its own brand benefits, Tianhui also pays great attention to the quality and technical requirements of the product. UVLED curing system is nothing more than in this way: optical system, heat dissipation system, and driving system. Although Tianhui has 8 years of technical personnel in the UVLED industry, it has not satisfied the status quo. It continues to overcome technical difficulties. It aims to provide customers with better and more cost -effective products and solutions. In the past ten years, it has been sufficient to prove that good -looking products will always be recognized by customers and markets. The road is long and far away, and I will ask for up and down. In the past ten years, Tianhui is more confident to take the future! In the future, Tianhui will not forget the original intention and continue to create value for new and old customers and partners in various industries!

Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

The white light LED and RGB LED are the same as they are in the same way. They both want to achieve the effect of white light, but one is directly presented in white light, and the other is made of red, green, blue, and three colors. The RGB light is used in three primary colors. In addition, there are blue light LEDs with yellow fluorescent powder and UV LED with RGB fluorescent powder. Overall, these two have their imaging principles. The colors of some LED backlight boards are particularly clear and bright, and even the degree of high -quality TV. This situation is the characteristics of RGB. The red, green, and blue are the characteristics of blue. In terms of mixed color, it has more characteristics. Zhuhai manufacturer specializes in the production of full -color RGB lamp beads, which is mainly engaged in 1206 full -color RGB 1010 full -color RGB 020 side luminous RGB and other full -color LED lamp beads. The attenuation problem of RGB and the impact of ultraviolet rays on the human body are more difficult to solve in the short term. Therefore, although they can meet the needs of white light, there are different results. In terms of application, RGB is obviously more diverse than the white light LED, such as car lights, traffic numbers, window, etc. When you need to use a wave of lights, the mixed color of RGB can be used. In contrast, the white light LED is more disadvantaged. Therefore, of course, the effect is relatively strong. White light LED is significantly inferior to RGB in the clarity and color purity. In addition, the problem of attenuation and the expensive wafer cost, all make the RGB light more advantageous. Choose a good full -color LED lamp bead preferred manufacturer, specializing in the production of 1206 full -color RGB 1010 full color RGB 020 side light -emitting RGB and other lamps. It is controlled alone when the RGB is separated. Although it can be directly controlled and the color is good, it is quite a big problem to reach the mixed white light. Although the cost is expensive, the quality is relatively good. As for the white light LED light, although it The cost is cheap, which can directly replace CCFL and become the main technology of LED, but relatively speaking, it is encapsulated together due to the problem of wavelength frequency, so that the scattered situation will be unstable. The problem of RGB lights in control still needs to be strengthened. For example, if one of them is broken, the entire screen will be quite obvious. Conversely, white light LED lights can be complemented. A broken LED, and the complement of uniformity, makes the overall situation look too bad. The end voltage of the PN knot constitutes a certain potential barrier. When the bias voltage decreases when the positive bias voltage is added, the majority of the carrier in the P and N areas spreads to the other party. Because the electronic migration rate is much greater than the air acupoint migration rate, a large number of electronic spreads to the P area, forming an injection of a minority carrier of the P area. These electrons are compounded from the cave on the price, and the energy obtained during composite is released in the form of light energy. This is the principle of PN knot glow. Generally referred to as the external quantum efficiency of the component, it is the internal quantum efficiency of the component and the product of the component's extraction efficiency. The internal quantum efficiency of the so -called component is actually the electrical conversion efficiency of the component itself. It is mainly related to the characteristics of the component itself (such as the energy band, defect, impurities) of the component itself,. The efficiency of the component refers to the photon generated inside the component. After the absorption, refraction, and reflection of the component itself, the number of photons that can be measured outside the component can. Therefore, the factors of the efficiency of removing the efficiency include the absorption of the component material itself, the geometric structure of the component, the refractive rate difference of the component and the packaging material, and the scattering characteristics of the component structure, etc. The product of the internal quantum efficiency of the component and the efficiency of the component efficiency is the lighting effect of the entire component, that is, the external quantum efficiency of the component. Early component development focuses on improving its internal quantum efficiency. The main method is to improve the quality of the barrier crystal and change the structure of the barrier crystal, so that the power energy is not easy to convert it into heat energy, and indirectly improves the luminous efficiency of LEDs. Internal quantum efficiency, but such internal quantum efficiency is almost close to the theoretical limit. Under such circumstances, it is impossible to increase the total light of the component by improving the internal quantum efficiency of the component. The main method is: the change of grain appearance——TIP structure, surface crude technology. The manufacturer produces a large number of 1206 full -color RGB 1010 full -color RGB 020 side glowing RGB. You can contact the official customer service staff!

Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

From the perspective of the industry, it is not difficult to buy the LED module light source lamp belt. Just pay attention to the following issues: 1. Before buying, understand the style and brand of the lamp belt. On the one hand, you can understand the style and brand ranking of the lamp online, and provide the basis for the purchase of the purchase. On the other hand, you can also inquire with friends around you, which kind of lamp strap has better performance and more affordable price. 2. According to the renovation renderings, the LED module light source lamp belt with suitable styles. When determining the style of the lamp, be sure to determine according to the renderings of the decoration. Of course, you can also communicate with the sales staff of the light belt, so that they recommend the appropriate lamp style style. Only in this way can the decoration effect be played. 3. Understand the price of the light band. According to the LED light belt manufacturers, the price of different brands and different styles is different. When choosing to buy, be sure to figure out the price market and help the purchase of a reliable and affordable lamp zone. 4. If you dont like the style of the lamp on the market, you can also contact the LED lamp with the LED light belt manufacturer to customize. According to reports, many LED lights with manufacturers have launched customized services, trying to provide more suitable light bands for users. The advantages of the LED module light source lamp belt are very obvious: the price of the LED light belt is getting lower and lower, the consumption of electricity is very small, only about 20%of ordinary lamps, and the service life is up to 100,000 hours. Dozens of times, it also has the characteristics of low maintenance cost, short response time, no pollution, etc. At the same time, the price of the LED module light source lamp band is also getting lower and lower, so it is very welcomed by consumers. Because the LED lamp belt has the advantages of efficient, longevity, energy saving, environmental protection, etc., now it is becoming more and more popular in the market, and more and more manufacturers who naturally produce LED light bands.

Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

Did you know that, as per a recent study, the average water bottle can harbor up to 300,000 colony-forming units of bacteria per square centimeter? That's more than the average toilet seat! With concerns about waterborne illnesses and the spread of germs at an all-time high, it's no wonder that UV sterilization technology has become a hot trend in the water bottle industry. And with the emergence of UVC LED technology, water bottle sterilization has become even more convenient, efficient, and effective. This blog post will explore the rising trend of UVC LED application in UV sterilization water bottles and its benefits.

How UV sterilization technology works in water bottles

UV sterilization technology is a popular method for disinfecting water and surfaces by using UV light to kill bacteria, viruses, and other microorganisms. When it comes to water bottles, UV sterilization technology is used to eliminate harmful bacteria and viruses that may be present in the water we drink.

The basic principles of how UV sterilization technology works in water bottles are as follows:

· A UV light source is installed inside the bottle cap, typically using a small UV LED module.

· When the cap is screwed onto the bottle, the UV LED module is activated and emits a wavelength of UV light lethal to microorganisms.

· As the water inside the bottle passes through the UV light, the light disrupts the DNA of any microorganisms present, rendering them harmless and unable to reproduce.

· After a few minutes of exposure to the UV light, the water is effectively sterilized and safe to drink.

Some advantages of using UV sterilization technology in water bottles include the following:

· No chemicals or additives are needed to disinfect the water

· The process is quick and efficient, taking only a few minutes to complete

· UV light is safe for humans to drink and does not affect the taste or quality of the water.

Many popular water bottle brands now offer UV sterilization models, with UV LED manufacturers supplying the necessary technology to make it all possible.

Advantages of using UVC LED technology for water bottle sterilization

Here are some advantages of using UVC LED technology for water bottle sterilization:

· Energy Efficiency: UVC LED technology consumes less energy than traditional UV lamps, making it more environmentally friendly and cost-effective.

· Longer Lifespan: UVC LED modules have a longer lifespan than traditional UV lamps, reducing the need for frequent replacements and maintenance.

· Compact Design: UVC LED modules are smaller and more compact than traditional UV lamps, making them easier to incorporate into water bottle designs.

· Rapid Disinfection: UVC LED modules can quickly disinfect water bottles in a matter of minutes, making it a convenient and efficient method for sterilization.

· No Chemicals: UVC LED technology does not require any chemicals or additives to disinfect water bottles, making it a safe and eco-friendly option for water disinfection.

· Improved Safety: UVC LED modules are designed only to emit UVC light, which is less harmful to human skin and eyes than UVA or UVB light emitted by traditional UV lamps.

These advantages have made UVC LED technology a popular choice for water bottle manufacturers, with many leading brands incorporating UVC LED modules into their products.

Factors to consider when choosing a UV sterilization water bottle

Here are some suggestions to consider when choosing a UV sterilization water bottle:

· Bottle capacity: Consider the size of the bottle and the amount of water it can hold, depending on your needs.

· Type of UV LED module: Look for a water bottle with a high-quality UVC LED module for optimal sterilization performance.

· Battery life: Consider the battery life of the UV sterilization system, especially if you plan to use the bottle for extended periods.

· Durability: Look for a water bottle of durable materials that can withstand regular use and travel.

· Price: UV sterilization water bottles are available at different price points, so consider your budget and choose a bottle that offers good value for money.

· Brand reputation: Choose a reputed brand with a record of producing high-quality UV sterilization water bottles.

Considering these points, you can choose a UV sterilization water bottle that meets your needs and provides effective water disinfection.

Key features of popular UV sterilization water bottle brands

Here are some key features of popular UV sterilization water bottle brands:

· Tianhui Electric: A leading UV LED manufacturer that offers high-quality UVC LED modules and solutions for UV sterilization water bottles and other water treatment systems.

· LARQ: Offers self-cleaning water bottles with a UV-C LED light that sterilizes the bottle and its contents every two hours.

· Klear Bottle: Uses a powerful UV-C LED module that can sterilize water in just 60 seconds.

· CrazyCap: Features a sterilization cap that fits on most water bottles, using a UV-C LED module to sterilize water in 2 minutes.

· UV Light: Produces a UV sterilization water bottle that uses a rechargeable battery and a UV-C LED module to sterilize water in 60 seconds.

· GRAYL: Produces a purifier bottle with a replaceable filter that removes 99.99% of bacteria, viruses, and other contaminants and includes a UV-C LED module to sterilize the water after filtering.

These popular UV sterilization water bottle brands offer a range of features and technologies to meet different needs and preferences. Some common features include the following:

· Quick sterilization times

· Compact design

· The use of high-quality UV-C LED modules for efficient and effective water disinfection

Consider these features when choosing a UV sterilization water bottle brand that fits your needs.

Future applications of UVC LED technology in water treatment and purification

Here are some possible future applications of UVC LED technology in water treatment and purification:

· Point-of-use water treatment: UVC LED technology can sterilize water at the point of usage, such as in homes, schools, and healthcare facilities, without chemicals or filtration systems.

· Municipal water treatment: UVC LED technology can be used in municipal water treatment systems to disinfect water and reduce the risk of waterborne diseases.

· Wastewater treatment: UVC LED technology can be used in wastewater treatment plants to disinfect wastewater and reduce the spread of disease-causing organisms.

· Aquaculture: UVC LED technology can be used in fish farms and other aquaculture systems to prevent the spread of disease and improve fish health.

· Agriculture: UVC LED technology can be used in agriculture to disinfect irrigation water and reduce the spread of disease among crops.

· Water conservation: UVC LED technology can be used in water reuse and recycling systems to disinfect and purify water for reuse in irrigation or other non-potable uses.

These are only a few illustrations of how UVC LED technology can be used in water treatment and purification. As UV LED manufacturers continue to innovate and improve UVC LED technology, we expect to see more widespread adoption in the coming years.

Conclusion

UV sterilization water bottles using UVC LED technology offer a convenient and effective solution for water disinfection, with many advantages over traditional UV lamps. As the demand for clean and safe water grows, we expect more innovations in UVC LED technology and its water treatment and purification applications. For those looking to incorporate UVC LED technology into their products, Tianhui Electric is a leading UV LED manufacturer that offers high-quality UVC LED modules and solutions for various applications. Whether you're developing a UV sterilization water bottle or other water treatment system, Tianhui Electric has the technology and expertise to meet your needs. Contact us today to know more about our products and services. Thanks for the Read!