What Are the Requirements for Use of Light -emitting Diodes

Do you also use it as soon as you get the goods and use it. How much do you know about the precautions before and after use? In order to let you understand the product characteristics, Xiaobian summarized a explanation of direct insertion: 1. Material confirmation; confirming the LED BIN area before use whether the LED BIN area meets the requirements. Example: Whether the voltage, strong light, and bands belong to the same BIN area, and products in the same BIN area should be used together. If the LED product in the same BIN area is applied to the same object, it should be evaluated (if the brightness of the different light strong BIN regions may be different, and different bands may be different from using the luminous color together). 2. Packaging storage; avoid moisture from entering the LED before disassembling packaging. It is recommended that the LED that is directly inserted in the series is stored in a moisture-proof cabinet with desiccant. The condition is: temperature of 5-30 C and a humidity of 35-60%. 3. Prevention measures during use; please confirm whether the packaging is intact before use. If there is a packaging, it needs to check whether the lamp anecades are aerobic and other problems. If the oxidation is not recommended, it is not recommended. Use compliance“How much do you need to disassemble and disassemble a pack with one pack”In principle, the lamp beads after disassembling the package should be used within 24 hours as soon as possible. Please be packed again for the remaining materials. Save in an environment with a humidity of less than 30%and the temperature of 10-30 C. If LED lamp beads need to bend their feet, it is recommended to be at least 1.6mm from the lamp body. Bending feet must be completed before welding. 4. Welding conditions; the peak welding temperature of this product is recommended to be less than 260 C. The number of welds in waves is recommended to be less than 2 times. It is not recommended to apply this product on the curved circuit board. Avoid fast cooling during welding, avoid any mechanical force or excessive vibration of any situation during LED welding and cooling. After welding, do not bend the wire board. 5. Static electricity protection; LED is a static sensitive electronic device, which should be used for electrostatic protection measures. Example: Wearing a static electrical ring during use. All equipment and instruments should be grounded. It is recommended to do static damage test after the assembly finished product. 6. Strongly recommend; in the process of using this product, please first confirm the first piece and small batch trial production. After the finished products pass the various tests, they will be put into use in large batches. 7. Other precautions; LED is exposed to sunlight for a long time or occasionally exposed to purple light that may cause colloidity to turn yellow. In order to ensure LED photoelectric performance, please keep the surface of the LED luminous area clean. In the design circuit, the reverse voltage or large current generated during the switching process should be impacted instantly on the LED. During the use process, avoid sharp tools such as tadpoles to touch the colloidal part. Okay, here is the precautions for the use of direct insertion. If you want to buy more light -emitting diodes, you can directly contact the online customer service.