[UVLED] You Need to Pay Attention to Selecting UVLED Curing Devices

Recently, I received some research units' consultation with UV curing equipment. I think it is necessary to write an article to share with you, giving us the selection of UV curing light sources. Industrial production can also be used as a reference as a reference. First, the spectrum currently has many applications due to the development of UVLED, such as surface solidification, visible light solidification, etc. At this stage, the spectrum of 365nm and 395nm peak wavelengths. What kind of spectrum is needed to achieve the best results, it is necessary to determine based on the glue or ink used, this can consult your glue or ink supplier. In addition, because the wavelength of UVLED is compared to traditional UV lights, the wavelength of the spectrum is much single. If you need to achieve the ideal effect, it is best to choose UV glue and UV ink. Single wave long UVLED light source model. Second, energy for UVLED light source: UVLED energy (MJ/cm2) = UV strength (mw/cm2)*illuminating time (s), precise control of UVLED strength and irradiation time, can accurately control LED UV energy to accurately control LED UV energy. Control time control, our UVLED solidification furnace, built -in computer microprocessor, can set the irradiation time and multiple control mode. For the irradiation intensity of UV LED, we use percentage to control. The radical strength range is 10 % -100 %. In addition, our UVLED light source can be used immediately, no need to warm up. Third, the strength distribution UVLED dryer's UV strength is very uniform, UV radical strength is considered when designing products. In terms of Tianhuilx-S100100 curing light source, with imported high-power LEDs and high-tech optical lenses, and unique software control programs, the radical strength range is 1000MW/CM2-8600MW/CM2. Don't choose some so -called "uniform" UV curing machines that have no data at all. Fourth, the advanced LED-UV curing machine with advanced safety and temperature has locking safety. After setting the control method, the light source can be automatically turned off to protect the safety of users. Other designs, including the technology of the cutting dissipation chip and the function of the computer micro -processor, effectively control the temperature rise. This requires special attention. The traditional mercury lamp temperature does not have a good light source, which will cause serious hidden dangers to burst light bulbs. Fifth, stability is difficult to directly prove it. Generally, it is the accumulation of industrial experience. General laboratories are usually not equipped with special machines. An unstable light source seriously affects the relevant test progress. And we have strict appearance testing and 7 years of R & D design experience to ensure the stable use of light sources.