Tianhui- one of the leading UV LED chip manufacturers and suppliers provides ODM/OEM UV led chip service for over 22+ years.
[UVLED Maintenance] the Maintenance of UVLED Curing Equipment
2022-09-22
Tianhui
23
As a new type of energy -saving device, UVLED solidified light source has been recognized and liked by customers. UVLED's energy -saving environmental protection and high efficiency are emerging products that replace traditional mercury lamps. For this product, we must pay attention to the maintenance of it to improve the service life. The heat dissipation of the UVLED curing device illuminates. We all know that UVLED is the light emitting diode, and UVLED is the ultraviolet light emitting diode. It is a type of LED. It integrates a large power LED chip with a high -power LED chip with a certain ratio of 200nm to 450nm according to a certain proportion. light source. UVLED light emitting mechanism: The end voltage of the PN knot constitutes a certain position. When the positive bias voltage decreases, most of the carrier of the P and N zone spreads to the other party. Because the electronic migration rate is much greater than the air acupoint migration rate, a large number of electronic spreads to the P area, forming an injection of a minority carrier of the P area. These electrons are compounded from the cave on the price, and the energy obtained during composite is released in the form of light energy. This is the principle of PN knot glow. Therefore, a large amount of heat will produce when glowing. When using the tianhui wind and cold illumination head, it is necessary. Maintenance of TianhuiuVled equipment in Zhuhai City. 1. Use this machine in harsh environments such as drying, ventilation, no high magnetic field. 2. In the process of lighting, do not perform parameter settings, illuminate head plugging and other actions. 3. Please do not disassemble the UVLED irradiation head and controller to avoid causing UVLED light leakage or damage to the machine. 4. Please do not shoot your eyes or skin directly to UVLED, so as not to cause damage. 5. When regularly cleaning the UVLED light and controller, please do not use chemical materials such as diluents, propylene glycol, and use a soft cotton cloth to dip a small amount of ethanol to wipe carefully. More information is welcome to log in
Author: Tianhui-Air Disinfection
Author: Tianhui-UV Led manufacturers
Author: Tianhui-UV water disinfection
Author: Tianhui-UV LED Solution
Author: Tianhui-UV Led diode
Author: Tianhui-UV Led diodes manufacturers
Author: Tianhui-UV Led module
Author: Tianhui-UV LED Printing System
Author: Tianhui-UV LED mosquito trap
GET IN TOUCH WITH Us
recommended articles
Are you looking for top-notch UV LED solutions? Look no further than our company, with an impressive 23 years of excellence in this field. We have been leading the way in providing high-quality UV LED solutions, setting the industry standard for nearly a quarter of a century. Trust us to deliver the best and most reliable products for all your UV LED needs.
Sunlight remains the most common source for achieving a tan, but its ultraviolet (UV) rays come with inherent risks. So is there any risk-free solution for this? Yes, and the answer is UV LED Lights. Let’s not waste a second and dive into the science behind UV light and tanning, explore traditional tanning methods, and introduce Tianhui UV LED, a leading supplier of UV LED solutions, as a potential alternative.
In the food and beverage industry, ultraviolet (UV) disinfection technology is a rapidly expanding sector. UV radiation is used to disinfect water, air, and surfaces by killing bacteria, viruses, and other pathogens to make the food healthy. This technology has grown in popularity due to its efficiency, usability, and minimal cost.
The rapid expansion of the electronics industry has necessitated the development of new and innovative technologies to propel the industry forward. The application of UV LED solutions is one of the emerging technologies in the electronics industry. Due to their unique characteristics, such as long lifespan, energy efficiency, and compact size, these solutions have been extensively adopted in the industry as a suitable alternative to conventional lighting sources.
UV LED curing is a technique that employs ultraviolet light to cure or harden substances. This procedure involves exposing the material to UV LED diodes emitting UV light. When UV light strikes a substance, it initiates a chemical reaction that causes the substance to harden or resolve. UV LED diodes emanate UV-A, UV-B, and UV-C light, which correspond to the wavelengths required to initiate the curing process.
Throughout the years, ultraviolet (UV) light as a disinfectant has gained popularity. UV LED has been used as a UV LED solution that is capable of killing a variety of microorganisms, including bacteria, viruses, and mold. It is also known as UV LED Disinfection process.
As summer approaches, so does the pesky problem of mosquitoes. These tiny insects can ruin a peaceful outdoor evening, leaving us with itchy bites and disease risk. Fortunately, there's a solution in the form of UV LED mosquito traps. These devices use the power of ultraviolet light to attract mosquitoes and other flying insects better.
Are you aware of the latest findings on the transmission rate of the new coronavirus? A recent study has uncovered a shocking discovery- the air transmission rate of the virus may be a staggering 1,000 times that of the contact surface! This means the virus may spread faster and farther than we previously thought. Keep reading to learn more about this groundbreaking research and what it means for our fight against the pandemic.
UV LED printing system is a cutting-edge technology that has revolutionized the printing industry by offering faster printing speeds, improved print quality, and increased energy efficiency. However, like any technology, it has its own pros and cons.
Are you looking for a robust and flexible solution to disinfect your space? Look no further than mobile UV units. These innovative robots move from room to room, eliminating harmful germs and bacteria on surfaces. Mobile UV led diodes are becoming popular as more industries outside of healthcare catch on to the benefits of UV disinfection.
no data
one of the most professional UV LED suppliers in China
we are committed to LED diodesfor over 22+ years, a leading innovative LED chipsmanufacturer & supplier for UVC LED 255nm265nm 275nm, UVB LED 295nm ~ 315nm, UVA LED325nm 340nm 365nm ~ 405nm.
+86-0756-6986060
+86 13018495990 
my@thuvled.com
+86-760-86743190You can find us here
2207F Yingxin International Building, No.66 Shihua West Road, Jida, Xiangzhou District, Zhuhai City,Guangdong, China
