[UVLED] How to Choose the Appropriate UVLED Light Source Radiograph in Glue

Recently, many customers consult TIANHUI, how do I choose the UVLED light source irradiation machine suitable for their glue? Tianhui has served in the UVLED industry for ten years. It is still more experienced about how to choose the UVLED light source radiograph that suits your glue. Mainly selected from the following aspects: 1> The wavelength suitable for glue curing is generally speaking. The wavelength required for UV glue is 365nm, but no exception is excluded. Now more and more glue manufacturers add longer wavelengths of light causes in the UV glue formula. The advantage of this is that the glue can have different colors. Because the longer the wavelength of UVLED, the more penetrating its penetration power, the more you penetrate the power, the more you penetrate the power. powerful. Tianhui's UVLED dot light sources, UVLED wire light sources, and UVLED surface light sources are 365nm and 395nm. These two wavelengths can basically cover the vast majority of UV glue on the market. After customer testing, its curing effect is very ideal. 2> The energy UV glue suitable for glue curing has a very important parameter: UVLED solidification energy and UVLED radiation strength. Energy units are generally scorched ears (J/CM^2) or Jiao (MJ/CM^2). The unit of radiation intensity is generally millilet (mw/cm^2). UV glue not only requires the appropriate curing energy, but also requires reasonable radiation strength. These parameters are explained in the specification book of UV glue. The radiation intensity of the UVLED light source irradiation machine cannot achieve the ideal effect. This is explained in the documentation of Tianhui. Click here to view (http: ///show-23-344.html)). 3> The radiation area suitable for your own craft is well understood. How large is the area of UV glue coating, it is best to choose the UVLED light source irradiation machine with a large radiation area. For example, the area of your own glue is very small, and it is about only less than 10mm. Then you can choose Tianhui's UVLED point light source radiograph LX-C40; if the glue area is long, you can choose the UVLED line of Tianhui's UVLED line Light source; if the glue area is large square, you can choose the UVLED facial light source of Tianhui. The above are the choice direction in the static situation. If you are illuminated by the water line or other methods, you can directly pick up the staff of Tianhui and give constructive opinions according to your own process needs to give constructive opinions. Some of the above suggestions are just a rough framework. Each customers UV glue curing process is different. Tianhui hopes that all customers can find the UVLED curing machine that suits them. Of course, the UVLED point light sources, UVLED light sources, UVLED surface light sources, UVLED curing machines, UVLED ovens and other products provided by Tianhui can be customized according to your requirements. The purpose is to provide users with higher cost -effective products to users And plan!