[UV Curing Machine] Different UV Curing Machines Have Different Composition Systems

The traditional UV curing machine traditional UV curing machine relies on mercury lamps, halogen lamps, or other ultraviolet light -lit lamps to produce ultraviolet light. The whole set of equipment consists of 4 parts: light source system, ventilation system, control system, and teleportation system. 1. The light source system is the core of the entire curing system. It consists of a UV lamp, lampshade, transformer (ballast), and capacitor (trigger). Domestic equipment is used to use high -pressure mercury lamps, and some of the imported equipment use metal halogen lights, UV lights. 2. The ventilation system, due to the light of the lamp tube and the temperature rises, a supporting ventilation system needs. 3. Control the system, which is used to control the switch of the lights, irradiation intensity, irradiation time and other parameters. Generally, a single -chip microcomputer is implemented. 4. The transmission system, through mechanical and equipment such as the conveyor belt, the products that need to be illuminated are accurately sent into the irradiation area. The new UVLED curing machine UVLED curing machine relies on ultraviolet LED to send specific wavelengths and energy to curing glue, ink and resin. Most of the three parts of the light source system, control system, and the heat dissipation system. When using the conveyor belt or assembly line, the characteristics of the traditional UV curing machine can also be used. 1. Light source system: Mainly the choice of UVLED lamp beads, UVLED control box, UVLED optical lens A. UVLED lights, which must match the spectral wavelength and power density of UV glue or ink absorption, otherwise No matter how many times, it is difficult to produce the ideal solidification effect, and it cannot even be solidified. Generally speaking, 365nm wavelengths with more UV glue, 395nm or 405nm in UV inks, but can not rule out some other situations. When contacting Tianhui, if you have already understood the wavelength and peak of the use, you may wish to directly inform, which will also help Tianhui to recommend the appropriate product and solution for you. b. The choice of UVLED control box must match the power of the controller's power supply. Tianhui's device is well equipped at the factory, if you have any questions, the technical support of the electricity after -sale. c. Optical lens, the material of optical lens or optical glass selected by Tianhui is generally mostly quartz, with high temperature resistance and high light transmission rate, especially for UV 365 and 395Nm. What needs to pay attention to is that there should be no stains or blocking the surface of the lens, so it is recommended to clean it once a week. 2. Control system: consisting of control circuit and software. Tianhui's UVLED control system is independently developed and produced, and has complete intellectual property rights. The UVLED control system is composed of the control circuit with control software. Its functions include: UVLED irradiation power adjustment, UVLED irradiation time adjustment, UVLED control method adjustment (panel control or remote control), UVLED irradiation anomaly alarm, etc.3. Heatal system: Reverse Composition of fans and heat slices. The light sources of TIANHUIUVLED curing equipment are mostly used to use a built -in heat dissipation. When choosing, pay attention to the selection of the fan and the air volume control and the exhaust air. Pay attention to the fan to match the UVLED power power. In addition, for some UVLED curing machines with harsh environment and greater power, Tianhui generally recommends that customers use water cooling and heat dissipation. Water cooling and heat dissipation can directly meet the customer needs of this time compared to the fan heat dissipation. Whether it is fan cooling or water cooling, the basic principle of Tianhui's cooling system is to ensure that the UVLED curing machine can work normally.