Three Major Issues of LED Light Source Industry and Three Major Misunderstandings

With the rapid development of science and technology, LED light sources and gradually inseparable from our lives. Today, the new and old alternation, undoubtedly the dominant position of LED light sources occupying daily lights, that is the LED industry problems and LED purchases. The question, share with you the doubts brought by these issues: LED light source industry three major issues LED light source problems 1: price. The price problem of LED products has always been one of the issues that have attracted much attention in the industry. If you are high, you will be considered not to be close to the people. If you are low, you will be said to be a self -descending identity. Therefore, the industry lacks a clear and clear standard.“Highness or not”In the embarrassing position, while the price of the product is restricted by the cost and the market, it has become a“As soon as possible”The question, the business owner will sell as much as possible, and for the consumer market, it seems that there are people who spend money to buy products. LED light source problem 2: policy. The United States has begun to completely ban incandescent lamps, which will be a major opportunity for LED products to compete in the market space, and this policy of favorable or disguised in the LED industry has emerged endlessly in recent years.“Policy poisoning”Make the LED industry overly dependent on government support. Although everyone understands that the industry will rely on the business market in the future, most companies still wait and see the government's trend in development, and immediately change the focus of the enterprise. Most LED companies have“Poisoning”The symptoms, imagine that you can stand on the shoulder of the giant, who would be unwilling to stand? LED light source problem three: concept. The concept is backward involved in many aspects. Channel, design, brand, marketing and other aspects can no longer measure and think about old concepts. Companies that have transformed from traditional lamps have channel advantages, but for channels or original projects, they have the advantages of channels or original projects. Adaptive reform is also necessary. What consumers do we face? What channels do they know about products through? What channels do they buy products? Today, with the continuous development of various technology, we carry the name of this high -tech industry. In front of the LED light source to buy three major misunderstandings, LED light sources, one, and the expectation of the actual service life is too high. LED manufacturer expects that the LED life will reach 100,000 hours MTBF (the average failure time, the standard for measuring light for traditional lamp manufacturers). However, just like all basic light sources, LED's light flux flow is also decayed over time. Therefore, although the LED light emitting time can be long, MTBF is not the only consideration for determining the service life. The decay of LED lumens is affected by many environmental conditions such as environmental temperature, humidity and ventilation. The influence of lingering attenuation is also affected by control, thermal management, current level, and many other electrical design considerations. Many salespersons may provide customers with some fuzzy information for some reasons when selling LEDs, causing misleading. For example, the service life of LED is about 100,000 hours. The 100,000 hours here refers to. However, as a light source of lighting, the brightness of the lights has a process of gradually decaying darker (such as sunlight, energy -saving lamps). This process is referred to as light decay. Therefore, when buying LED, consumers should pay attention to its speed of light decay, not use time, and consumers will not expect too much about the actual service life. LED light source misunderstanding two, take the actual light angle as an effective angle. The luminous angle of LED is divided into effective angles and actual lighting angles. The angle between the angle between the direction of the emitting strength is half the direction of the axial strength and the light emitting axial (method) is a valid angle. Two times the angle (or semi -power angle) of the half -value angle is the actual lighting angle. Angle beyond the angle of the axial strength, because the light is too weak in the actual application, does not count on the valid angle. Therefore, consumers should pay attention to the actual lighting angle of the product when buying products. When calculating the number of products used in the project, it is based on the actual lighting angle. LED light source misunderstanding three, the larger the power, the higher the brightness. The brightness of the LED is measured by luminous intensity. The light emitting intensity refers to the light emitting intensity in the direction of the method line (to the cylindrical luminous pipe refers to its axis), that is, the volume of the optical flux emitted by the three -dimensional angle of the unit. Due to the small luminous strength of the general LED, the light emitting intensity is often used in the units of the country. Generally speaking, the light source will radiate its light flux in different directions in different directions. The visible light radiation intensity released in the three -dimensional angle of the unit in a specific direction is called the light intensity, referred to as the axis brightness. From the concept of the power to the power of the power in the same time, the current is fast, the current is fast, the electricity is large; the current is slow, the electrical power is small, or in the equal time, the more the current does the current, the greater the electricity. On LED, the greater the power, the higher the brightness of the product. Taking the three -light red LED of a certain electronic company as an example, when the axial brightness is 1200mcd, the current is 40mA and the power is 0.48W; the three light white LED is at the same brightness, the current is 18mA, and the power is only 0.24W; it can be seen that it can be seen that it can be seen The power of the two lights under the same brightness is different. Therefore, consumers should pay attention to its axis brightness when buying LED lamps, not power. Zhuhai Co., Ltd. is a professional LED lamp bead manufacturer with a number of national patents. The main products include purple light LED, infrared LED lamp beads, ultraviolet LED lamp beads, color LED lamp beads, etc. High temperature resistance, high power. We have 16 years of LED patch experience. The monthly production capacity is about 60 million PCS, and the annual output is about 500 million PCS. It integrates R & D, production and sales. If you need to know more about LED lamp beads, you can consult our customer service for you“Tailor -made appropriate LED lamp beads”Essence