The Installation Method of LED Module Light Source Lamp Band

LED lights, this is something we are very familiar with, in many places in daily life, it will be used. For the LED module light source light belt, I believe that many friends have been in contact with. There are also LED module light source lights in general families. Its decorative effect is very strong, and the applications in industries such as automobiles, advertising bars are also very wide. Today, I want to explain the installation method of the LED module light source lamp band. The installation method of LED module light source lamp belt 1. The wiring method (power connection method) of the LED module light source lamp belt is usually like this. Because its general voltage is DC 12V, it is necessary to use the switching power supply to supply power. The size of the power supply is determined according to the power and connection length of the LED module light source light band. 2. Of course, the installation of the LED module light source lamp belt is more focused on whether the waterproof performance and installation are firm. Because the LED module light source lamp belt usually to withstand the wind and rain. If it is fixed with 3M glue, it will cause 3M adhesive to reduce the time of the LED module light source lamp band. Therefore, the card slot fixation is often used during installation. It needs to be cut and connected. It only needs to prepare another waterproof glue to consolidate the waterproof effect of the connection point. Then use a special fixed card to fix the eyes with an electric hammer, and use a plastic bloating tube to add screws to fix the card. This can be firm in the wind and rainy weather in the wind and rain. 3. If you want to use a large power supply to achieve the changing effect of the light source lamp band of the LD module, you need the help of the controller. During the wiring, the lamp belt is generally common anode, that is, one on the lamp belt is12V, and the others are all three negative RGB negative poles, which means that the control distance of each controller is different. Generally speaking, the control distance of the simple controller is 10-15m, the control distance of the remote controller is 15-20m, and the longer can be controlled to 30m distance. If the connection distance of the LED module light source lamp band is long, and the controller cannot control such a long lamp belt, we need to use the power amplifier to separate. Here we need to science with you. The generally used 3528 series LED module light source light belt is generally 20m, the 5050 series LED module light source light belt, the length connection distance is 15m. If this connection distance is exceeded, then the light belt is easy to heat and hot. During the use process, it will affect the service life of the LED module light source lamp belt. 4. Monochrome LED module The wiring method of the light source lamp belt is to distinguish positive and negative electrodes. Generally, we need to prepare the welded power plug, and then insert it directly to the position of the light belt power supply. If the module light source lamp belt is controlled by a power supply, you can buy a large switching power supply as the total power supply, and then connect all the LED module light source light bands in parallel. This can achieve the effect of centralized control, but it is inconvenient that it cannot achieve the lighting effect and switch control of a single LED module light source light belt. The above is the installation method of the LED module light source lamp. I hope it can be useful to all friends. If you have any questions during the installation process, consult a professional manufacturer. Our Zhuhai TIANHUI Optical Lighting Technology Co., Ltd. was established in 2004 in the ancient town of Dengdu, and has been focusing on: LED's research and development and manufacturing. At the same time, we also welcome everyone to consult.