The Correct Way of Using UV Machines and Places to Pay Attention To

The correct way of using UV machines and the place to pay attention to the power cord correctly connect to the power supply. Turn on the main gate switch, the power indicator lights up, and then press the power start button to check whether the machine is in a standby state. Turn on the UV machine switch and run the network belt. Please adjust the speed adjustment knob according to the product requirements to make the running speed of the net zone start to start the A light. Wait for the A current to fall to a stable state before starting the B light or C light. Prevent the power switch from overflow. When the ultraviolet light needs to be turned off, press A Light to stop and the B light button continues to operate, heat dissipation of ultraviolet lamp tube, wait for the light tube to cool, automatically cut off the power supply of the header. After the power is started, if the light does not turn on the light for a long time, the device will automatically cut off the power supply. After turning off the lights, the ultraviolet light is started immediately. When replacing the UV lamp tube, after opening the box, the pine electric box is fixed to the screw, pulled out the light box for disassembly and replacement. What you need to pay attention to: Is the grounding line good?. When the fan is abnormal, please do not use it to avoid burning ultraviolet lamps. When replacing ultraviolet lights, do not touch the lamp tube with your hands, otherwise it will cause moles on ultraviolet lights to affect the lighting efficiency. You need to wear clean gloves for installation. In order to prevent the life of UV lights from decreased, do not cut off the total switching power supply immediately after turning off the lights. You need to wait for the machine to automatically shut down before cutting off the total power switch. When you find that there is a slight jump during the rotation process, please immediately spin the tight screws at both ends of the transmission roller. When the machine is seriously faulty, it is necessary to notify the manufacturer or dealer in time to open the case by yourself.