loading

Tianhui- one of the leading UV LED chip manufacturers and suppliers provides ODM/OEM UV led chip service.

The Characteristics and Applications of Infrared LED Lamp Bead Patch

The characteristics of infrared LED lamp beads are similar to the shape of the general visible light LED lamp beads, but the infrared rays are issued. Its voltage is generally about 1.4V, and the working current is generally less than 20mA. In order to adapt to different working voltage, limited flow resistance in the circuit. When using infrared LED lamp beads to control the corresponding controlling device, the distance between its control is proportional to the launch power. In order to increase the control distance of infrared rays, the infrared LED launch tube is working in the pulse state, because the effective transmission distance of the pulse light is proportional to the veins of the pulse. As long as you try to increase the peak IP, you can increase the transmission distance of infrared light. The method of improving IP is to reduce the pulse to the duty ratio, that is, the width T of the compressed pulse, the duty -duty duty cycle can also increase the launch distance of the low -power infrared light. Ordinary infrared light emitting diodes are divided into three categories: small power, medium power and high power. To make the infrared light emitting diode generate, just add a certain frequency pulse voltage to the drive tube. When infrared diode emitted infrared rays to control the controlled device, there are corresponding infrared conversion elements in the control device, such as infrared receiving diodes, infrared receiving heads, light -sensitive triode, etc. There are two ways to launch and receive infrared launch, namely direct and reflectives. Direct refers to the relative to the two ends of the launch and the controlled by the optical pipe and the receiving tube, and the middle phase is a certain distance in the middle; the reflection of the light pipe is tied together with the receiving tube. Usually the receiving tube is always no light, and only the infrared emitted by the luminous pipe only in the luminous pipes. When the light encounters a reflex, the receiving tube receives the infrared light returned from the reflection. Double -tube infrared launch circuit can increase the launch power and increase the distance of infrared launch. Specializing in the production of various types of LED lamp beads, we are all customized according to the needs of customer product needs, and according to the characteristics of infrared LED lamp beads, we can get a wider range of applications according to different wavelengths: 1. Wave length: 808nm, applicable to applicable In the pump light source of medical equipment, space light communication, infrared lighting, and solid laser; 2, wavelength: 830nm, suitable for automatic card swiping system on high -speed roads (the night vision system is best, you can see that there is a little red light on the tube core. , The effect is better than 850nm); 3, wavelength: 840nm, suitable for cameras and color change infrared waterproof; 4, wavelength: 850nm, suitable for cameras, digital photography, monitoring, building intercom, anti -theft alarm, infrared waterproof; 5 Wavelength: 870nm, suitable for cameras at the intersection of shopping malls and crossroads; 6. Palace: 940nm, suitable for remote control, such as the remote control of home appliances. Zhuhai Co., Ltd. is a professional LED lamp bead manufacturer with a number of national patents. The main products include purple light LED, infrared LED lamp beads, ultraviolet LED lamp beads, color LED lamp beads, etc. High temperature resistance, high power. We have 16 years of LED patch experience. The monthly production capacity is about 60 million PCS, and the annual output is about 500 million PCS. It integrates R & D, production and sales. If you need to know more about the relevant information, you can contact our customer service, we will serve you wholeheartedly!

The Characteristics and Applications of Infrared LED Lamp Bead Patch 1

Author: Tianhui-Air Disinfection

Author: Tianhui-UV Led manufacturers

Author: Tianhui-UV water disinfection

Author: Tianhui-UV LED Solution

Author: Tianhui-UV Led diode

Author: Tianhui-UV Led diodes manufacturers

Author: Tianhui-UV Led module

Author: Tianhui-UV LED Printing System

Author: Tianhui-UV LED mosquito trap

GET IN TOUCH WITH Us
recommended articles
Projects Info Center Blog
Sunlight remains the most common source for achieving a tan, but its ultraviolet (UV) rays come with inherent risks. So is there any risk-free solution for this? Yes, and the answer is UV LED Lights. Let’s not waste a second and dive into the science behind UV light and tanning, explore traditional tanning methods, and introduce Tianhui UV LED, a leading supplier of UV LED solutions, as a potential alternative.
In the food and beverage industry, ultraviolet (UV) disinfection technology is a rapidly expanding sector. UV radiation is used to disinfect water, air, and surfaces by killing bacteria, viruses, and other pathogens to make the food healthy. This technology has grown in popularity due to its efficiency, usability, and minimal cost.
The rapid expansion of the electronics industry has necessitated the development of new and innovative technologies to propel the industry forward. The application of UV LED solutions is one of the emerging technologies in the electronics industry. Due to their unique characteristics, such as long lifespan, energy efficiency, and compact size, these solutions have been extensively adopted in the industry as a suitable alternative to conventional lighting sources.
UV LED curing is a technique that employs ultraviolet light to cure or harden substances. This procedure involves exposing the material to UV LED diodes emitting UV light. When UV light strikes a substance, it initiates a chemical reaction that causes the substance to harden or resolve. UV LED diodes emanate UV-A, UV-B, and UV-C light, which correspond to the wavelengths required to initiate the curing process.
Throughout the years, ultraviolet (UV) light as a disinfectant has gained popularity. UV LED has been used as a UV LED solution that is capable of killing a variety of microorganisms, including bacteria, viruses, and mold. It is also known as UV LED Disinfection process.
As summer approaches, so does the pesky problem of mosquitoes. These tiny insects can ruin a peaceful outdoor evening, leaving us with itchy bites and disease risk. Fortunately, there's a solution in the form of UV LED mosquito traps. These devices use the power of ultraviolet light to attract mosquitoes and other flying insects better.
Are you aware of the latest findings on the transmission rate of the new coronavirus? A recent study has uncovered a shocking discovery- the air transmission rate of the virus may be a staggering 1,000 times that of the contact surface! This means the virus may spread faster and farther than we previously thought. Keep reading to learn more about this groundbreaking research and what it means for our fight against the pandemic.
UV LED printing system is a cutting-edge technology that has revolutionized the printing industry by offering faster printing speeds, improved print quality, and increased energy efficiency. However, like any technology, it has its own pros and cons.
Are you looking for a robust and flexible solution to disinfect your space? Look no further than mobile UV units. These innovative robots move from room to room, eliminating harmful germs and bacteria on surfaces. Mobile UV led diodes are becoming popular as more industries outside of healthcare catch on to the benefits of UV disinfection.
UV LED, also known as Ultraviolet Light Emitting Diodes, is a solid-state device that produces light as soon as you pass electrical currents in a circuit. These currents pass from the positive side to the negative side of a current.
no data
one of the most professional UV LED suppliers in China
You can find  us here
2207F Yingxin International Building, No.66 Shihua West Road, Jida, Xiangzhou District, Zhuhai City,Guangdong, China
Customer service
detect