[Print] the Reason for Printing Cannot Reject UVLED Light Sources

Most of the domestic UV lamp tubes are mercury lamps, and the shell material is quartz glass. One of the better features of this glass is to transmit ultraviolet rays and infrared rays. However, because the quartz glass is very thin, it is only 0.3mm, so it is not significant for the unique effect on infrared rays. The UV lamp tube is launched at the time of working, that is, infrared, visible light, and ultraviolet rays exist at the same time. Because infrared rays have a strong heat effect, this has led to a dramatic temperature increase in the UV area. It is simply relying on thick quartz glass to ensure that the temperature effect of the UV area is not good. Once a domestic manufacturer, a domestic manufacturer specially purchased a quartz glass cover and installed it on the UV lamp tube. In order to effectively avoid the middle layer too thick, or on the other hand, effectively reduce infrared rays and reduce calories, the following points must be achieved: first to ensure the efficacy of the cooling section, it needs to be transferred to the dedicated wind supply and air supply device to the cooling section. , So that it can exude the heat in time to ensure that the product is cured at a lower temperature for UV. The best state is that the product UV can be reduced to less than 40 degrees before. The second is to ensure that the UV section has a smooth exhaust system. Each UV lamp tube is installed with pumping pipes, because the UV lamp tube is the largest heat source during normal working. At the same time, in order not to cause the wire body airflow to disordinate, the air volume should be supplemented at the same time, so it is necessary to arrange the air supply device. The more common approach is to arrange a exhaust link UV lamp tube on the top of the online body, and a row of winds is also arranged below the side of the thread, on the one hand, it is to maintain the cleanliness of the UV room. Get off at the top of the online body. At this time, the natural wind without heating is used to help cool down the overheated area in time. Furthermore, using UVLED light sources as a luminous body, UVLED light source is a pure ultraviolet light source. During the work process, infrared rays, visible light and other miscellaneous light are largely reduced. It is a single band of ultraviolet light emitting a single band of ultraviolet light. Although the total electrical power does not have high mercury lamps (the light in different bands is up, high power consumption), the single wave length is only one -tenth or less of the UVLED light source. Therefore, the UVLED light source, while reducing the calories and improving energy, is an irreplaceable ultraviolet light solid -curing light source. If you want to know more, please enter our official website to view.