High -light Effect LED Integrated Lamp Production

Shenzhen Technology's LED packaging patch products have a variety of products, including red, yellow, blue, green, white, white, purple light, RGB, etc., which are widely used in fire lights, street lights, miner lights, warning lights, lamps, LED transient light effects It refers to the luminous efficiency of LED light sources when starting to work, also known as the initial cold light effect. It is the instantaneous light flux measured by a certain short pulse current by the metering source. , The width of the heating pulse is usually 1- tens of ms. The steady -state light effect refers to the ratio of the light flux measurement to the electrical power measured when the chip knot temperature is no longer rising and the light strong when the light is strong when the LED light source work enters the thermal stability. The steady -state light effect refers to the optical effects of LED overall lamps except to drive the power supply, which reflects the comprehensive characteristics of light, electricity, and thermal in the actual work of LED. In addition to LED transient light and electrical specialty, the steady -state light effect also includes the temperature changes of system heat transmission and heat dissipation. It is also known as system light. High -light effect LED integrated lamp bead lighting project and other aspects. Shenzhen Science and Technology Park has complete management and comfortable environment. Adjacent to the main road, convenient and fast transportation and freight. At present, these main applications are about these: LED lights are lights with light emitting diode as the light source. LED is a solid semiconductor device. LED is the third -generation lighting technology after incandescent lamps and fluorescent lamps. It has the characteristics of energy saving, environmental protection, safe and reliable. The color rendering index of sunlight is defined as 100, and the color rendering index of incandescent lamps is very close to the sunlight, so it is regarded as an ideal benchmark light source. This system is tested with 8 -chroma medium and medium -sized standard color samples. Compared with the degree of deviation (Deviation) in the test light source and the same color temperature, to measure the color rendering index of the light source, take the average deviation value value RA20-100, with 100 as the highest, the larger the average color difference, the lower the RA value. Light sources below 20 are usually not suitable for general use. High -light LED integrated lamp monster building, historical building group exterior wall lighting, light and outer transparency in the building, indoor local lighting, green landscape lighting, billboard lighting, medical culture and other special facilities lighting, bars, ballroom and other entertainment venues atmosphere Lighting and so on. Hundreds of products. The product power range ranges from 0.5W to 100W, and the light effect reaches 130LM/W, and zero light decay has achieved 2000 hours; Shenzhen Technology's LED packaging patch products have a variety of products. From the analysis of the number of chips and the integrated density of the chip, it is found that integrated integration is found to be integrated The packaging of multi -chip white -light LED temperature increases with the increase of the number of integrated chips. The emotional efficiency is decreased as the number of integrated chips increases. Therefore Important factors. Cob package“COB light source module→LED lamps”, Can be directly encapsulated by multiple chips on MCPCB on the metal -based printing circuit board, and directly dissipate the heat through the substrate to save LED packaging costs, light engine module production costs, and secondary lighting costs. In terms of performance, through reasonable design and microscopy, the COB light source module can effectively avoid the disadvantages of light and glare exist in the combination of separation light source devices; it can also effectively improve the color of the light source by adding appropriate red chip combinations sex. High -light LED integrated lamp beads include red, yellow, blue, green, white, white, purple light, RGB, etc., which are widely used in shooting lights, street lights, miners lights, warning lights, lamps, and lighting projects. Shenzhen Science and Technology Park has complete management and comfortable environment.