[Failure] Common Faults and Treatment Methods of UVLED Curing Equipment

The UVLED curing device has been used in many industries. Here we use the device of Zhuhai Zhuhai Tianhua Electronic Co., as an example to analyze the most common faults and solutions of these devices in daily life. 1. Put the alarm. In order to ensure that the work is normal, the UVLED curing equipment will detect the sensor inside the light source when booting. If it is not detected, check whether the connected cable is well exposed. If there is no problem, replace the sensor inside the light source. Over. 2. The temperature of the light source is abnormally elevated. Due to the huge heat of the light source, the two ways of heat dissipation and water cooling with fans and water cooling are generally used. If it is a fan cooling, check whether each fan is operating normally. You need to check whether the sink inside the light source is blocked. 3. The irradiation effect is not satisfactory. First, use the inspection distance whether the irradiation distance is normal, whether the various UVLED lights of the light source can light up, and whether there is an abnormal phenomenon of light emitting. Of course, some faults, such as unable to drive the machine, the touch screen does not respond, etc. These require the manufacturer's professional and technical personnel to solve.