There Are Several Types of Colors of LED Module Light Source Lamp Bands

What are the four parameters of the LED module light source lamp? Let s introduce the four major parameters: the LED module light source light tape parameters are color: this is a basic parameter, different colors are applied in different occasions. According to the color type, it can be divided into three types: monochrome, colorful, and full -color single -point control. Monochrome is a single color and cannot be changed. You can work after connecting the power supply. Colorful is that the entire string of modules can only be the same color, and cannot achieve different colors of a single module. In simple terms, only all modules can only achieve the same color at the same time. Inter -changing. A single point of full color is to control the color of each module. When the number of modules reaches a certain degree, the effect of display pictures and videos can be achieved. You need to add control systems to achieve the effect of colorful and full -color single points. We will introduce the control system selection and application in detail in the control system chapter. LED module light source lamp band parameters are voltage: this is a very important parameter, the current 12V low -voltage module is more common. When connecting the power supply and the control system, you must check the correctness of the voltage value in order to power the power, otherwise it will damage the LED module. LED module light source light band parameters III is working temperature: that is to say, the temperature of the normal work of LED. Usually between -20 60 , special treatment must be performed if the required range is relatively high. The LED module light source lamp band parameters Fourth is the lighting angle: the LED module that does not have a lens is mainly determined by the LED. The different light angle of LED is also different. Generally angle.