The Advantages of Integrated Light Sources

Shenzhen Technology Co., Ltd. launched the 3030 patch lamp bead series, which is currently widely used in industrial lighting, commercial lighting, landscape lighting and other fields. This series of products is a SMD patch light source made of PCT. Since the LED is a flat glowing body, its light effect is as high as 120LM/W, which is much higher than the 100LM/W of 70LM/W and the T5 lamp tube. LED light box overall light effect is higher. The main reason for the large failure failure is the yellowing or reduction of silicone or reduction. The formal LED P and N electrodes are on the same side of the LED. The current must flow across the N-GAN layer horizontally, resulting in a crowded current, high local heat, and limiting the driving current. Disappear. In the process of long -term use, the high temperature caused by poor heat dissipation affects the performance and transmission of silicone, which causes a large light output power attenuation. The advantages of integrated light sources are compared with the advantages of small, high current, high power, high -light, low light failure, high consistency, cost -effectiveness and cost -effectiveness compared with models such as 2835, 5050, and 5730. At present, the main application places are about these: COB lights are different from LED lights that LED lights are energy -saving, environmentally friendly, non -frequent -free and non -ultraviolet radiation. The disadvantage is the harm of blue light. COB light is high color, light color is close to natural color, no frequency flash and glare, no electromagnetic radiation, no UV radiation, infrared radiation, can protect the eyes and skin. LED panel lights can design different shapes, different light sources, and integrated panel lights according to people's needs. This is why there are so many restaurants' panel lights. Integrated light sources, the outer wall lighting of the historical building complex, the light and outer transplantation of the building, the indoor local lighting, the green landscape lighting, the advertising card lighting, the medical culture and other special facilities lighting, the bar, the ballroom and other entertainment venues Wait. From encapsulation to assembly, the LED formation process requires six processes (solid crystals, welded wires, packaging, corner cutting slices, spare time, packaging). Great potential, LED -related industries are rapidly expanding from general lighting to almost all fields. Different from general lighting, the lighting applications of some special fields have also received more and more attention, and the market prospects are becoming more and more optimistic. These applications need to rely on the special LED light source. In order to obtain a good current expansion, the NI-AU metal electrode layer cannot be too thin. For this reason, the lighting efficiency of the device will be greatly affected. Usually, both factors: both current expansion and outlet efficiency. But under what circumstances, the existence of a metal film will always make the light transmission performance worse. In addition, the existence of the leading welding joint also affects the light efficiency of the device. The structure of the Ganled inverted chip can fundamentally eliminate the above problems above. Integrated light sources, the advantages of gel machines, chipping machines, spectatums, compilation machines) and six major materials (chips, brackets, insulation gels, gold threads, silicone, fluorescent powder) need a lot of labor and many costs. And because of structural problems, the encapsulated lamp beads cannot shine at 180 degrees, and the lighting effect is affected.