[UVLED Maintenance] How to Maintain UVLED in a Humid Environment?

Recently, the weather is hot, rainy places! The failure and problems of UVLED curing machines also increase significantly. If the operation is improper, it may cause the machine to work properly, and it can also cause the adhesion of the picture to be unscrupulous, and even the situation of falling off. This affects customers' output and tasks. In the good time of this UVLED curing machine, how to maintain the UVLED curing machine in this season? First of all, the working environment is important! Most of them are heavy rainfall in a short time, accompanied by strong winds. The UVLED curing machine's operation room must be kept dry. The UVLED curing machine must not be placed in a very close position after ventilation from the windows and doors. Pay attention to close the doors and windows to avoid the rainwater from entering the room, increase the indoor air humidity, and the operating room is equipped with air conditioners For equipment, you must turn off the door and window to open the dehumidification function of the air conditioner, because the board card accessories inside the UVLED curing machine belong to the electronic product and are not easy to be corroded by moisture. In addition, if the ground is tide, it is generally difficult to completely dehumidify. You can spread some newspapers and waste books on the ground to absorb water. Many users usually do not pay attention to the storage of materials and often stacked at will. Because the peak of the air humidity in the rainy season is as high as 90%, the air, the ground, and the wall will contain a lot of water. Composition, paper and coatings are suitable for adsorption of water and moisture. Therefore, the printing material should be placed back to the original packaging after each use, and placed on a special shelf in a suspended manner. Do not touch the ground and the wall. How to print the screen is difficult to dry. It is recommended to use the drying heater, or print it. Heat the material before. Because the ink of each manufacturer is different, the color saturation, gorgeous degree and drying time of each ink are different, so the choice of UV printer ink is also very important. It is generally recommended to choose the original ink of the UV printer. The original ink is officially passed through long -term testing, which can make the UVLED curing machine well match with ink. The above points are the precautions of the use of UVLED curing machines and related consumables in a humid climate environment in the rainy season. I hope it will be helpful to you. If you need more help and support, please contact us.